The Tunnel Drive Homeport Archives
This page is intended as a reference...please use the
new board
for new posts.
| discussion forum |
original documents
|
boat photographs
|
PUTTING OUTBOARD ON 74 PY I/O COMMENTS
-
JIM
13:39:40 5/24/03
(0)
Penn Yan info
-
Bob B.
10:37:08 1/25/03
(1)
Re: Penn Yan info
-
Seafoam
05:44:01 2/17/03
(0)
RE: Penn Yan 12' cartopper
-
carl soderlund
13:18:59 1/16/03
(0)
54 pennyan model ?
-
Dana Turner
14:13:45 1/04/03
(0)
Pen Yann
-
Ronnie Powell
19:17:58 12/24/02
(2)
Re: Pen Yann
-
Ronnie Powell
04:44:36 2/16/03
(0)
Re: Penn Yan
-
Ronnie Powell
19:33:59 12/24/02
(0)
PennYanSwift & 25 Merc - For Sale
-
Jim Manning
11:32:22 12/16/02
(1)
Re: PennYanSwift & 25 Merc - For Sale
-
Richard Peterson
07:33:30 12/23/02
(0)
Penn Yan with Renault engine
-
Mike Wood
18:07:08 12/11/02
(0)
Stringer drive available
-
Steve Curtis
09:42:06 12/01/02
(0)
1973 23' Avenger FlyBridge For Sale
-
Brian Slayne
08:02:41 12/01/02
(0)
1982 33' Penn Yan SF
-
jguhar@yahoo.com
21:03:39 11/28/02
(1)
Re: 1982 33' Penn Yan SF
-
Ratt
18:15:03 5/29/03
(0)
penn yan virgin, considering '73 21.5 footer
-
marks
17:13:07 11/21/02
(1)
Re: penn yan virgin, considering '73 21.5 footer
-
Bob Sullivan/Sully
06:54:13 11/22/02
(0)
30' sportfish
-
T MCLAUGHLAN
14:17:44 11/18/02
(0)
Boat location
-
Rich B
15:25:20 11/16/02
(0)
Loction of boat
-
Rich B
15:21:24 11/16/02
(0)
1979 26'pictures location
-
Rich B
09:13:42 11/10/02
(4)
Re: 1979 26'pictures location
-
waiting
18:00:56 1/12/03
(0)
Re: 1979 26'pictures location
-
Andy B.
11:31:14 11/13/02
(2)
Re: 1979 26'pictures location
-
Rich B
12:25:52 11/14/02
(0)
Re: 1979 26'pictures location
-
Rich B
12:25:02 11/14/02
(0)
1979 Penn Yan 26' Flybridge, Twin Screw For Sale
-
Rich B
09:04:59 11/10/02
(0)
backing the monster
-
jim meyer
12:55:33 10/10/02
(2)
Re: backing the monster
-
Captbob
17:04:01 10/12/02
(1)
Re: backing the monster
-
capt. Dan Thomson
07:04:14 10/31/02
(0)
rudder, rudder port, strut
-
Russell Wakefield
18:37:46 10/09/02
(0)
SWITCHING TO THRU THE TRANSOM EXHAUST
-
JERRY
11:55:11 9/20/02
(1)
Re: SWITCHING TO THRU THE TRANSOM EXHAUST
-
Chuck rothert
14:30:23 9/26/02
(0)
73- 23' FLY BRIDGE
-
FRANK
13:18:10 9/15/02
(3)
Re: 73- 23' FLY BRIDGE
-
Chuck Rothert
16:52:07 9/16/02
(2)
Re: CHUCK, WHAT IS THAT WEB SITE?
-
FRANK
17:54:26 9/16/02
(1)
new bbs and 360
-
almar
11:43:11 9/17/02
(0)
23' FLY BRIDGE
-
GREG
13:10:08 9/02/02
(1)
Re: 23' FLY BRIDGE
-
Captbob
14:58:50 9/02/02
(0)
penn yan
-
Mike Shad
07:08:34 7/28/02
(1)
Re: penn yan
-
Chuck Rothert
17:22:07 7/28/02
(0)
Stamped oil pan vs Cast oil pan. Mike please read this
-
Capt.Ron Pagliaro
16:19:19 7/11/02
(2)
Re: Stamped oil pan vs Cast oil pan. Mike please read this
-
L.C.
07:51:37 7/12/02
(1)
That was the ticket !!!
-
Capt.Ron Pagliaro
15:36:35 7/24/02
(0)
360 oil pan wanted
-
Capt.Ron Pagliaro
15:07:20 7/11/02
(0)
1978 23' flybridge
-
Jim
07:42:42 7/11/02
(1)
Re: 1978 23' flybridge
-
Jim
07:44:48 7/11/02
(0)
Question for Mike Gildea
-
Dean Georgatos
22:32:32 7/06/02
(0)
WOT 3200 RPM is this a problem?
-
Dean Georgatos
18:11:27 7/06/02
(2)
Re: WOT 3200 RPM is this a problem?
-
Troy Rizzuto
13:47:54 8/17/02
(0)
Re: WOT 3200 RPM is this a problem?
-
Capt.Ron Pagliaro
11:14:53 7/07/02
(0)
Happy Fourth
-
Capt. David Pierucci
15:44:41 7/03/02
(2)
Re: Happy Fourth
-
Bootlegger
10:03:20 7/04/02
(1)
Re: Happy Fourth
-
Seafoam
04:07:37 7/05/02
(0)
ALL ALONE ON A CALM NIGHT
-
Seafoam
10:31:28 6/28/02
(9)
Re: ALL ALONE ON A CALM NIGHT
-
Dean Georgatos
18:12:11 7/03/02
(0)
Re: ALL ALONE ON A CALM NIGHT
-
Bdriller
04:30:48 7/01/02
(1)
Re: ALL ALONE ON A CALM NIGHT
-
Bootlegger
20:33:44 7/01/02
(0)
Re: ALL ALONE ON A CALM NIGHT
-
Bob Sullivan
11:58:04 6/28/02
(5)
Re: ALL ALONE ON A CALM NIGHT
-
Jorge
15:08:14 6/28/02
(4)
Re: ALL ALONE ON A CALM NIGHT
-
Chuck Rothert
05:40:27 6/29/02
(3)
Re: ALL ALONE ON A CALM NIGHT
-
Jorge
07:31:23 6/29/02
(2)
Re: ALL ALONE ON A CALM NIGHT
-
Chuck Rothert
18:14:34 6/29/02
(1)
Re: ALL ALONE ON A CALM NIGHT
-
Bootlegger
07:38:07 6/30/02
(0)
test post
-
Ryan Rothert
05:58:25 6/27/02
(6)
Re: test post
-
Ryan Rothert
05:58:52 6/27/02
(5)
Re: test post
-
Seafoam
06:44:29 6/27/02
(4)
Re: test post
-
Ryan Rothert
06:47:08 6/27/02
(3)
Re: test post
-
Seafoam
06:54:26 6/27/02
(2)
Re: test post
-
Ryan Rothert
07:02:03 6/27/02
(1)
Re: test post
-
Seafoam
07:25:07 6/27/02
(0)
WWW.PENNYANBBS.ORG "IT'S NEW"
-
Seafoam
14:17:49 6/25/02
(0)
2003 flotilla rondevous:Hey Slow-poke
-
AlMar
12:16:29 6/25/02
(0)
dead rise on 23' tunnel drive
-
Mike Adams
12:00:37 6/25/02
(0)
Get this, now I need STRINGER REPLACEMENT!!
-
Chris - Key West
22:35:55 6/24/02
(3)
Re: Get this, now I need STRINGER REPLACEMENT!!
-
Brett Peck
12:02:03 6/25/02
(0)
gotta comment
-
Seafoam
07:10:23 6/25/02
(1)
Re: gotta comment
-
Chris - Key West
07:39:36 6/25/02
(0)
penn-tone conversion
-
mike shamroy
17:21:16 6/24/02
(0)
Wiring Diagram
-
Bob Sullivan
16:47:47 6/24/02
(0)
flax packing again
-
john humphrys
08:54:24 6/24/02
(1)
Re: flax packing again
-
Chuck Rothert
11:57:42 6/24/02
(0)
Opinions wanted on 24' Penn Yan 1975 FB
-
Mike S.
21:36:17 6/23/02
(1)
early 24`s
-
Mike Gildea
21:34:43 6/24/02
(0)
Flybridge Enclosure for sale- reduced
-
Mike Schnack
16:07:20 6/23/02
(0)
Chrysler 360 marine manual
-
Capt.Ron Pagliaro
14:16:00 6/23/02
(0)
She is in the water !How do I post pictures?
-
Jim Crunkilton
17:35:52 6/21/02
(0)
She is in the water !How do I post pictures?
-
Jim Crunkilton
17:33:25 6/21/02
(1)
Re: She is in the water !How do I post pictures?
-
Chuck Rothert
09:22:55 6/22/02
(0)
Distributor Springs Dilemma
-
Slow Poke
00:32:10 6/21/02
(5)
Drinks Are on YOU!
-
Seafoam
10:00:47 6/24/02
(0)
Re: Distributor Springs Dilemma
-
Capt. David Pierucci
09:16:28 6/21/02
(3)
Re: Distributor Springs Dilemma
-
Slow Poke
03:36:10 6/22/02
(0)
Capt Pierucci re: distributer
-
AlMar
09:48:34 6/21/02
(1)
Re: Capt Pierucci re: distributer
-
Capt. David Pierucci
10:48:46 6/21/02
(0)
Bulkhead holes
-
Jay Berkowitz
23:26:51 6/20/02
(1)
Re: Bulkhead holes
-
simcha brandeis
04:11:17 6/23/02
(0)
Exaust thru hull
-
Budd
13:16:49 6/20/02
(12)
Re: Exaust thru hull
-
Chuck Rothert
17:10:43 6/20/02
(11)
Re: Exaust thru hull
-
Chris - Key West
23:07:42 6/20/02
(10)
Sounds like a plan to me.
-
Chuck Rothert
09:22:19 6/21/02
(0)
Re: Exaust thru hull
-
AlMar
07:13:22 6/21/02
(8)
Re: Exaust thru hull
-
Chris - Key West
10:19:03 6/21/02
(7)
Re: Exaust thru hull
-
AlMar
12:36:43 6/21/02
(6)
Re: Exaust thru hull
-
Chris - Key West
08:28:18 6/22/02
(5)
Re: Exaust thru hull
-
captaindoug
10:08:28 6/24/02
(4)
Re: Exaust thru hull
-
Bob Sullivan
16:28:27 6/24/02
(2)
Re: Exaust thru hull
-
captaindoug
20:36:24 6/24/02
(1)
Re: Exaust thru hull
-
Bob Sullivan
09:48:24 6/25/02
(0)
Re: Exaust thru hull
-
Fred Schanz
11:05:01 6/24/02
(0)
318 block
-
almar
12:29:54 6/20/02
(0)
1972 hardtop 20.5 and trailer reduced to 1500.00
-
CY BOY
22:52:40 6/19/02
(0)
1974 explorer hardtop FOR SALE Reduced 1500.00
-
CY BOY
22:27:44 6/19/02
(0)
318 engine
-
bill schlegel
12:02:34 6/19/02
(5)
Re: 318 engine
-
Gary
16:24:13 6/21/02
(0)
engine douche
-
Mike Gildea
15:10:34 6/19/02
(1)
Re: engine douche(Mike)
-
AlMar
07:28:44 6/21/02
(0)
Re: 318 engine
-
alMar
12:50:30 6/19/02
(1)
Re: 318 engine
-
Al Devernoe
13:20:26 6/19/02
(0)
1971 exhaust hose hookup?
-
Paul
10:39:48 6/19/02
(1)
Re: 1971 exhaust hose hookup?
-
Alan Devernoe
11:53:28 6/19/02
(0)
drain plug
-
paragod
21:39:06 6/18/02
(0)
ex manifolds
-
paragod
21:23:59 6/18/02
(0)
Uno Mas Engine update!
-
paragod
21:21:50 6/18/02
(6)
Aluminum manifolds
-
Mike Gildea
20:57:59 6/19/02
(5)
Re: Aluminum manifolds
-
Andy B.
20:37:22 6/23/02
(4)
Re: Aluminum manifolds
-
Jorge
14:31:31 6/24/02
(3)
Re: Aluminum manifolds;Jorge
-
AlMar
15:28:35 6/24/02
(2)
Re: Aluminum manifolds;Jorge
-
Andy B.
16:05:21 6/24/02
(1)
Re: Aluminum manifolds;Jorge
-
Jorge
19:44:39 6/24/02
(0)
exhaust
-
Len Forlenza
20:57:01 6/18/02
(0)
Exhaust hoses to transom
-
Paul
10:27:36 6/18/02
(2)
Re: Exhaust hoses to transom
-
Mike Gildea
21:02:11 6/19/02
(0)
Re: Exhaust hoses to transom
-
Chuck Rothert
17:55:40 6/18/02
(0)
Wood in Hull - Part 3
-
Chris - Key West
23:04:08 6/17/02
(4)
Re: Wood in Hull - Part 3
-
Slapshot
07:45:28 6/18/02
(0)
Re: Wood in Hull - Part 3
-
Slapshot
07:45:25 6/18/02
(2)
Re: Wood in Hull - Part 3
-
Chris - Key West
14:36:01 6/18/02
(0)
Re: Wood in Hull - Part 3
-
AlMar
09:02:55 6/18/02
(0)
For Sale 1952 Penn Yan 14' Trail Boat
-
Bob H.
19:54:24 6/16/02
(1)
Re: For Sale 1952 Penn Yan 14' Trail Boat
-
Phillip
22:31:02 6/17/02
(0)
over power
-
Sam
19:26:14 6/16/02
(0)
need info, installing OSCO manifolds 318
-
Paul Perini
10:28:52 6/16/02
(5)
Re: need info, installing OSCO manifolds 318
-
Larry in Missouri
10:41:45 6/17/02
(4)
Re: need info, installing OSCO manifolds 318
-
rob
09:10:48 6/20/02
(0)
Re: need info, installing OSCO manifolds 318
-
Almar
07:15:26 6/18/02
(2)
Re: need info, installing OSCO manifolds 318
-
Paul
09:57:41 6/18/02
(1)
Re: need info, installing OSCO manifolds 318
-
almar
15:27:13 6/18/02
(0)
Hull material and transducers
-
Chuck Rapp
21:40:26 6/15/02
(4)
Re: Hull material and transducers
-
Chuck Rapp
09:12:39 6/16/02
(1)
Good choice
-
Bootlegger
10:12:26 6/16/02
(0)
Re: Hull material and transducers
-
Bill H
23:26:58 6/15/02
(0)
Re: Hull material and transducers
-
Mandy
22:31:41 6/15/02
(0)
OPPS 3 posts,must have done somthing wrong
-
Capt.Ron Pagliaro
16:58:20 6/15/02
(0)
WHY ! the 318 oil pan does not fit the 360 ?????
-
Capt.Ron Pagliaro
16:57:03 6/15/02
(2)
Re: WHY ! the 318 oil pan does not fit the 360 ?????
-
Larry in Missouri
23:13:39 6/15/02
(0)
Re: WHY ! the 318 oil pan does not fit the 360 ?????
-
Chuck Rothert
21:12:33 6/15/02
(0)
WHY ! the 318 oil pan does not fit the 360 ?????
-
Capt.Ron Pagliaro
16:56:57 6/15/02
(0)
WHY ! the 318 oil pan does not fit the 360 ?????
-
Capt.Ron Pagliaro
16:56:25 6/15/02
(0)
DONE DEAL!.....1981, 201/2' EWG.
-
mike shamroy
07:26:00 6/15/02
(5)
Re: DONE DEAL!.....1981, 201/2' EWG.
-
Jim
14:19:51 6/24/02
(0)
Re: DONE DEAL!.....1981, 201/2' EWG.
-
Bob Sullivan
21:51:48 6/15/02
(1)
Re: DONE DEAL!.....1981, 201/2' EWG.
-
mike shamroy
20:43:21 6/16/02
(0)
Re: DONE DEAL!.....1981, 201/2' EWG.
-
Chuck Rothert
09:32:46 6/15/02
(1)
Re: DONE DEAL!.....1981, 201/2' EWG.
-
mike shamroy
20:41:18 6/16/02
(0)
Temp & Pressure for Cry 318????????
-
Dean Georgatos
23:57:02 6/14/02
(1)
Re: Temp & Pressure for Cry 318????????
-
Chuck Rothert
15:04:48 6/15/02
(0)
318 Reverse rotation on Ebay
-
Bob G
13:05:53 6/14/02
(0)
Chuck - Another "Four-blader's" Take
-
Lawdog
22:36:17 6/13/02
(7)
Re: Chuck - Another
-
Alan Miller
15:33:49 6/14/02
(1)
Re: Chuck - Another
-
Chuck Rothert
16:34:59 6/14/02
(0)
Re: Chuck - Another "Four-blader's" Take
-
Bdriller
13:34:53 6/14/02
(0)
Re: Chuck - Another "Four-blader's" Take
-
Chuck Rothert
12:10:53 6/14/02
(0)
Re: Chuck - Another "Four-blader's" Take
-
Andy B.
11:22:46 6/14/02
(1)
Re: Chuck - Another
-
Lawdog
19:01:52 6/14/02
(0)
Re: Chuck - Another "Four-blader's" Take
-
Capt. David Pierucci
09:01:14 6/14/02
(0)
OJ
-
Paul Welch
21:15:18 6/13/02
(3)
Re: OJ
-
Lawdog
22:16:51 6/13/02
(2)
Re: OJ
-
Paul Welch
07:45:24 6/14/02
(0)
Re: OJ
-
Andy B.
22:28:40 6/13/02
(0)
electronic ignition and opinions
-
AlMar
12:55:24 6/13/02
(5)
differences in distributors
-
Mike Gildea
22:40:56 6/17/02
(1)
Re: differences in distributors
-
Wayne
22:45:02 6/17/02
(0)
Re: electronic ignition and opinions
-
Rich
22:29:18 6/13/02
(0)
Re: electronic ignition and opinions
-
Chuck Rothert
19:00:19 6/13/02
(1)
Re: electronic ignition and opinions
-
AlMar
14:52:24 6/17/02
(0)
Chrysler oil pump shaft bushing
-
Larry
08:18:42 6/13/02
(1)
Re: Chrysler oil pump shaft bushing
-
Capt. Bob
08:59:26 6/14/02
(0)
20.5 FOR SALE 1977
-
JIM MC GEOCH
23:26:32 6/12/02
(0)
trailer tires sizes
-
Mandy
16:34:27 6/12/02
(2)
Re: trailer tires sizes
-
Sam
19:08:26 6/12/02
(1)
Re: trailer tires sizes
-
Mandy
21:41:59 6/12/02
(0)
Fly-Bridge Enclosure for SALE
-
Mike Schnack
15:52:48 6/12/02
(8)
Re: Fly-Bridge Enclosure for SALE: Price, No Pics at this time.
-
M Schnack
08:15:04 6/15/02
(2)
Re: Fly-Bridge Enclosure for SALE: Price, No Pics at this time.
-
M Schnack
18:21:15 6/16/02
(0)
Re: Fly-Bridge Enclosure for SALE: Price, No Pics at this time.
-
M Schnack
18:20:13 6/16/02
(0)
Re: Fly-Bridge Enclosure for SALE
-
Mike Schank
09:17:47 6/14/02
(0)
Re: Fly-Bridge Enclosure for SALE
-
Mike Schank
09:12:10 6/14/02
(0)
Re: Fly-Bridge Enclosure for SALE
-
AlMar
10:35:38 6/13/02
(0)
Re: Fly-Bridge Enclosure for SALE
-
Sam
07:12:52 6/13/02
(0)
Re: Fly-Bridge Enclosure for SALE
-
Bill
17:28:49 6/12/02
(0)
cooling temps for the 318
-
AlMar
12:46:34 6/12/02
(0)
Wiring Diagram is messed up on this BB//Seafoam?
-
Capt.Ron Pagliaro
12:12:30 6/12/02
(1)
Re: Wiring Diagram is messed up on this BB//Seafoam?
-
Seafoam
12:52:30 6/12/02
(0)
Raw Water Cooling 318 vs 360 PLEASE HELP
-
Capt.Ron Pagliaro
12:08:39 6/12/02
(3)
Re: Raw Water Cooling 318 vs 360 PLEASE HELP
-
AlMar
12:27:48 6/12/02
(2)
oops, Raw Water Cooling 318 vs 360 PLEASE HELP
-
almar
12:55:09 6/12/02
(1)
Please Fax Info ASAP
-
Capt.Ron Pagliaro
17:58:45 6/12/02
(0)
Cheap stern thruster
-
Jay Berkowitz
11:14:53 6/12/02
(5)
Re: Cheap stern thruster
-
Almar
12:43:00 6/21/02
(0)
Re: Cheap stern thruster
-
Sam
19:14:14 6/14/02
(0)
Re: Cheap stern thruster
-
Mike W.
18:19:05 6/13/02
(0)
I don't know much about small boats and......
-
Doug Smart
08:10:55 6/13/02
(1)
Re: I don't know much about small boats and......
-
Jay Berkowitz
20:02:18 6/23/02
(0)
new materials
-
Sam
21:48:49 6/11/02
(5)
Re: new materials
-
almar
09:22:52 6/12/02
(0)
Re: new materials
-
rusty
07:25:44 6/12/02
(0)
Re: new materials
-
rusty
07:24:30 6/12/02
(2)
Re: new materials
-
Doug Smart
09:15:59 6/12/02
(1)
Re: new materials
-
rusty
06:56:08 6/13/02
(0)
Question for Brett
-
Ray
18:33:45 6/11/02
(5)
Re: Question for Brett
-
BP
12:16:31 6/12/02
(2)
Re: Question for Brett
-
BP
12:19:17 6/12/02
(1)
Re: Question for Brett
-
Ray
17:20:09 6/24/02
(0)
Re: Question for Brett
-
Bill H
11:00:34 6/12/02
(0)
Re: Question for Brett
-
AlMar
07:12:46 6/12/02
(0)
Running temp. on a 318
-
Dean Georgatos
18:14:40 6/11/02
(1)
Yes, need info too.
-
Doug Smart
06:34:36 6/12/02
(0)
'74 23' hardtop
-
AlMar
15:44:29 6/11/02
(5)
Re: '74 23' hardtop
-
Rob
08:01:12 6/14/02
(0)
Re: '74 23' hardtop
-
Sam
07:07:04 6/14/02
(0)
Re: '74 23' hardtop
-
Sam
18:12:19 6/11/02
(2)
Re: '74 23' hardtop:Sam
-
AlMar
07:07:15 6/12/02
(1)
Re: '74 23' hardtop:Sam
-
Sam
19:02:52 6/12/02
(0)
trans fluid/ dead engine followup
-
jay
10:51:40 6/11/02
(1)
Re: trans fluid/ dead engine followup
-
Bill R.
01:43:25 6/12/02
(0)
265 Pro Hunter Hardtop for sale, Diesel, Jet !
-
Tim Hall
10:29:51 6/11/02
(0)
engine temp
-
Jay Berkowitz
00:17:42 6/11/02
(3)
engine temp
-
Mike gildea
22:57:20 6/17/02
(0)
Re: engine temp
-
Steve Lawson
17:56:55 6/11/02
(1)
Re: engine temp
-
Jay Berkowitz
22:17:28 6/11/02
(0)
poor slow speed manuvering
-
Jay Berkowitz
23:28:20 6/10/02
(0)
boat weight
-
Jay Berkowitz
23:19:42 6/10/02
(2)
26ft FBSF weight
-
Mike Gildea
21:44:32 6/17/02
(0)
Re: boat weight
-
Steve Lawson
15:56:10 6/11/02
(0)
Changing from Reverse engine to Standard Rotation Engine
-
Chris - Key West
21:51:45 6/10/02
(6)
Re: Changing from Reverse engine to Standard Rotation Engine
-
Rusty
08:00:44 6/12/02
(0)
Re: Changing from Reverse engine to Standard Rotation Engine
-
AlMar
08:15:12 6/11/02
(4)
Re: Changing from Reverse engine to Standard Rotation Engine
-
BP
12:33:15 6/11/02
(3)
Re: Changing from Reverse engine to Standard Rotation Engine
-
Chris - Key West
15:16:05 6/11/02
(2)
Re: Changing from Reverse engine to Standard Rotation Engine
-
BP
12:24:24 6/12/02
(0)
Re: Changing from Reverse engine to Standard Rotation Engine
-
Andy B.
16:54:33 6/11/02
(0)
Newbe
-
Sam
20:32:12 6/10/02
(8)
something is not right
-
Mike Gildea
22:10:39 6/17/02
(0)
I'm a newbe too
-
Doug Smart
07:42:20 6/11/02
(3)
Re: I'm a newbe too
-
Sam
18:09:40 6/11/02
(2)
Re: I'm a newbe too
-
Doug Smart
21:21:14 6/11/02
(1)
Re: I'm a newbe too
-
Sam
21:45:26 6/11/02
(0)
Re: Newbe
-
Sam
20:38:53 6/10/02
(2)
Re: Newbe
-
Chuck Rothert
10:02:29 6/11/02
(0)
Re: Newbe
-
AlMar
08:22:42 6/11/02
(0)
Question for the 4-Blade OJ people.
-
Chuck Rothert
12:29:43 6/10/02
(4)
Re: Question for the 4-Blade OJ people.
-
Fred Schanz
15:37:06 6/11/02
(0)
Re: Question for the 4-Blade OJ people.
-
Wayne
13:38:11 6/11/02
(0)
Re: Question for the 4-Blade OJ people.
-
Alan Miller
13:03:46 6/11/02
(1)
Re: Question for the 4-Blade OJ people.
-
Chuck Rothert
05:50:24 6/12/02
(0)
stern thru haul fitting
-
Doug Smart
07:51:08 6/10/02
(7)
Re: Stern Thru-haul Fitting--Question
-
Steve Lawson
18:14:35 6/11/02
(0)
Re: stern thru haul fitting
-
Chuck Rothert
10:24:21 6/10/02
(5)
Re: stern thru hull fitting
-
Doug Smart
15:07:05 6/10/02
(4)
Re: stern thru hull fitting
-
Chuck Rothert
08:50:25 6/11/02
(0)
Re: stern thru hull fitting
-
bp
20:08:19 6/10/02
(2)
Hey Brett
-
Chuck Rothert
10:31:30 6/11/02
(1)
Re: Hey Brett
-
BP
12:37:52 6/11/02
(0)
flax packing question
-
john humphrys
07:38:16 6/10/02
(3)
Re: flax packing question
-
Chuck Rothert
10:16:25 6/10/02
(2)
Re: flax packing question
-
Mike W.
15:44:21 6/10/02
(1)
Re: flax packing question
-
Chuck Rothert
09:01:23 6/11/02
(0)
Raw Water Cooling 318 vs 360
-
Capt.Ron Pagliaro
22:35:09 6/09/02
(0)
Fuel Tanks - Where can I get galvanized tanks & pics of mine
-
Chris - Key West
19:02:24 6/08/02
(3)
Re: Fuel Tanks - Where can I get galvanized tanks & pics of mine
-
Jay Berkowitz
23:07:07 6/08/02
(2)
Re: Fuel Tanks - Where can I get galvanized tanks & pics of mine
-
Chris - Key West
23:19:38 6/08/02
(1)
Re: Fuel Tanks - Where can I get galvanized tanks & pics of mine
-
Jay Berkowitz
23:18:10 6/10/02
(0)
Fly Bridge soft
-
Russ
17:13:12 6/06/02
(3)
Re: Fly Bridge soft
-
Rich
21:50:02 6/06/02
(2)
Question for Rich
-
Russ
18:13:59 6/07/02
(1)
Re: Question for Rich
-
Rich
22:17:36 6/13/02
(0)
Tight steering on Fly Bridge
-
Dean Georgatos
20:00:01 6/05/02
(5)
Re: Tight steering on Fly Bridge
-
Andy B.
12:11:54 6/06/02
(2)
Re: Tight steering on Fly Bridge
-
Pete Cooper
18:18:15 6/11/02
(1)
Re: Tight steering on Fly Bridge
-
Andy B.
22:55:36 6/12/02
(0)
Re: Tight steering on Fly Bridge
-
Rich
22:32:32 6/05/02
(0)
Re: Tight steering on Fly Bridge
-
Ed Mitchell
22:10:06 6/05/02
(0)
Strut Bearing
-
Phil
10:35:47 6/05/02
(1)
Re: Strut Bearing
-
BP
11:10:45 6/05/02
(0)
Shaft Coupling Bolts
-
Phil
10:12:16 6/05/02
(3)
Re: Shaft Coupling Bolts
-
BP
11:06:09 6/05/02
(2)
Re: Shaft Coupling Bolts
-
Ed Mitchell
07:12:02 6/06/02
(1)
Re: Shaft Coupling Bolts
-
Phil
08:52:51 6/06/02
(0)
Rusty - Wood in hull - UPDATE
-
Chris - Key West
00:06:47 6/05/02
(1)
Re: Rusty - Wood in hull - UPDATE
-
rusty
06:59:16 6/10/02
(0)
Blisters - Pics & Boat Updates
-
Chris - Key West
23:49:38 6/04/02
(1)
Re: Blisters - Pics & Boat Updates
-
PARAGOD
01:30:16 6/05/02
(0)
Blocking Avenger..Advice?
-
Capt. David Pierucci
15:45:46 6/04/02
(3)
Re: Blocking Avenger..Advice?
-
Bill H.
17:43:20 6/04/02
(2)
Re: Blocking Avenger..Advice?
-
AlMar
08:09:47 6/05/02
(1)
Re: Blocking Avenger..Advice?
-
Capt. David Pierucci
08:50:17 6/05/02
(0)
sweet potato Y water manifold
-
Jim Ryan
12:36:36 6/04/02
(0)
parts
-
Jim Ryan
11:54:08 6/04/02
(0)
Question for Brett......wiring diagram
-
Allan Claflin
06:48:55 6/04/02
(1)
Re: Question for Brett......wiring diagram
-
BP
12:37:47 6/04/02
(0)
dry weight of a 1976 23 foot flying bridge penn yan inboard
-
Terry West
20:35:39 6/03/02
(1)
23ft flybridge is 4600 pounds dry, no accessories or paint
-
Mike Gildea
21:18:21 6/03/02
(0)
Prop
-
kim
15:03:40 6/03/02
(5)
Re: Prop
-
Bill P
00:45:02 6/04/02
(0)
Single screwed 26ft
-
Mike Gildea
21:32:54 6/03/02
(1)
Re: Single screwed 26ft
-
Jay Berkowitz
00:30:23 6/04/02
(0)
Re: Prop
-
Jay Berkowitz
19:22:58 6/03/02
(1)
slow toad
-
Mike Gildea
15:57:31 6/19/02
(0)
318 or 340 needed
-
Russ
14:37:44 6/03/02
(4)
Re: 318 or 340 needed
-
Wayne P.Landry
10:53:36 6/05/02
(0)
Re: 318 or 340 needed
-
Wayne P.Landry
10:51:56 6/05/02
(0)
Re: 318 or 340 needed
-
Capt.Ron
20:30:02 6/04/02
(0)
Re: 318 or 340 needed
-
Ed Mitchell
21:08:53 6/03/02
(0)
prop 26' single
-
Jay Berkowitz
19:37:33 6/02/02
(0)
'73 23' fly bridge - electrical diagram
-
Allan Claflin
09:56:07 6/02/02
(2)
Re: '73 23' fly bridge - electrical diagram
-
Russ
12:53:13 6/03/02
(1)
Re: '73 23' fly bridge - electrical diagram
-
Allan
19:19:01 6/03/02
(0)
Question for Mike Gildea
-
rusty
22:01:50 6/01/02
(2)
I`m a city boy, I`ve never played with tractors......
-
Mike Gildea
21:47:01 6/02/02
(1)
Re: I`m a city boy, I`ve never played with tractors......
-
Rusty
06:49:07 6/04/02
(0)
Question about a Tru-Hull Transducer
-
Lenny from LI
18:02:19 6/01/02
(0)
NOW HEAR THIS! IMPORTANT
-
Seafoam
17:45:35 5/31/02
(4)
Re: NOW HEAR THIS! IMPORTANT
-
Capt. David Pierucci
07:34:26 6/01/02
(1)
Re: NOW HEAR THIS! IMPORTANT
-
Seafoam
16:04:22 6/01/02
(0)
YEEE HAAAA
-
Bootlegger
18:05:14 5/31/02
(1)
Re: YEEE HAAAA
-
mike shamroy
04:00:13 6/02/02
(0)
360 flywheel
-
almar
09:22:49 5/31/02
(0)
23Avenger SF '77 FOR SALE
-
joe mcq
08:36:20 5/31/02
(1)
Re: 23Avenger SF '77 FOR SALE
-
Les Bowman
14:01:49 6/01/02
(0)
23Avenger SF '77 FOR SALE
-
joe mcq
08:35:22 5/31/02
(0)
Oil Filter for a Crysler 318
-
Dean Georgatos
19:48:37 5/30/02
(4)
Re: Oil Filter for a Crysler 318
-
Mandy
20:24:32 5/30/02
(3)
Re: Oil Filter for a Crysler 318
-
Dean Georgatos
20:57:44 5/30/02
(2)
Oil Filter for a Crysler 318
-
Mike gildea
22:32:36 5/30/02
(1)
Re: Oil Filter for a Crysler 318
-
Dean Georgatos
03:52:18 5/31/02
(0)
318 & 360 Chrysler marine parts FOR SALE
-
Capt.Ron Pagliaro
19:31:33 5/29/02
(0)
'73 23' fly bridge
-
Allan Claflin
18:19:15 5/28/02
(9)
Re: '73 23' fly bridge
-
Ed Mitchell
20:35:57 5/29/02
(2)
Re: '73 23' fly bridge
-
Ed Mitchell
20:52:17 5/29/02
(1)
Re: '73 23' fly bridge (Ed)
-
AlMar
08:15:28 5/30/02
(0)
Hull Id.
-
Capt. Dan Thomson
12:56:59 5/29/02
(2)
Re: Hull Id.
-
Jorge
17:17:53 5/29/02
(0)
Re: Hull Id.
-
Allan Claflin
16:38:58 5/29/02
(0)
Re: '73 23' fly bridge
-
Ed Mitchell
20:33:11 5/28/02
(0)
Re: '73 23' fly bridge
-
Slow Poke
19:27:10 5/28/02
(0)
Re: '73 23' fly bridge
-
Bootlegger
18:43:12 5/28/02
(0)
outdrive
-
Mike
15:47:34 5/28/02
(2)
Re: outdrive
-
BP
11:45:27 5/29/02
(0)
Re: outdrive
-
Seafoam
06:46:47 5/29/02
(0)
OMC manifold gaskets
-
Lind
14:36:47 5/28/02
(0)
hey L.C.! flywheel question
-
almar
12:55:35 5/28/02
(2)
Re: hey L.C.! flywheel question
-
L.C.
10:08:08 5/31/02
(1)
Re: hey L.C.! flywheel question
-
almar
14:34:26 6/03/02
(0)
I Want an OJ !!!!!!
-
Josh-KW
12:43:51 5/28/02
(2)
Re: I Want an OJ !!!!!!
-
Seafoam
07:00:25 5/29/02
(1)
Re: I Want an OJ !!!!!!
-
BP
16:05:34 5/30/02
(0)
Left Rotation OJ 3 Blade 4 sale
-
Capt. Dan Thomson
12:30:42 5/28/02
(0)
Speed and RPM
-
Bdriller
10:33:19 5/28/02
(14)
Re: Speed and RPM
-
Bob Sullivan
16:46:21 5/30/02
(0)
Re: Speed and RPM
-
Bdriller
08:28:08 5/30/02
(1)
Re: Speed and RPM
-
Chuck Rothert
20:08:55 5/30/02
(0)
Re: Speed and RPM
-
Bill R. (U.S. Blues)
01:01:21 5/29/02
(0)
Re: Speed and RPM
-
Capt. Dan Thomson
11:46:42 5/28/02
(0)
Re: Speed and RPM
-
Seafoam
11:44:33 5/28/02
(8)
Re: Speed and RPM
-
Bdriller
08:39:05 5/29/02
(7)
Re: Speed and RPM
-
Al Devernoe
15:53:04 5/29/02
(2)
Re: Speed and RPM
-
Jorge
17:09:15 5/29/02
(1)
Re: Speed and RPM
-
BP
12:08:52 5/30/02
(0)
DON'T PUT A 13" DIAMETER PROP ON!
-
Capt. Dan Thomson
08:53:46 5/29/02
(3)
Re: DON'T PUT A 13
-
Bdriller
09:17:27 5/29/02
(2)
Re: DON'T PUT A 13
-
Capt. Dan Thomson
12:45:24 5/29/02
(0)
Re: DON'T PUT A 13
-
BP
11:43:52 5/29/02
(0)
fuel tanks
-
rusty
09:52:09 5/27/02
(9)
custom fuel tanks
-
Seafoam
11:58:47 5/28/02
(2)
here's the info
-
Seafoam
15:00:33 5/28/02
(1)
Re: here's the info
-
rusty
21:53:52 5/28/02
(0)
Seafoam, you gotta read this!!!!!!
-
Bootlegger
22:22:54 5/27/02
(5)
Re: Seafoam, you gotta read this!!!!!!
-
rusty
21:30:36 5/28/02
(1)
Re: Seafoam, you gotta read this!!!!!!
-
Bootlegger
23:09:22 5/28/02
(0)
Bootlegger-- Your put'n a hurt on
-
Chuck Rothert
10:20:52 5/28/02
(2)
What's Green?
-
Bootlegger
13:37:00 5/28/02
(1)
Re: What's Green?
-
Chuck Rothert
16:15:46 5/28/02
(0)
Chris_key west: get in touch with me.
-
Josh-KW
15:01:08 5/25/02
(0)
plastic tanks needs opinion
-
Mandy
09:53:42 5/25/02
(18)
Re: plastic tanks needs opinion
-
rusty
20:50:50 5/30/02
(0)
Re: plastic tanks needs opinion
-
almar
07:09:18 5/29/02
(1)
Re: plastic tanks needs opinion
-
Mandy
18:26:13 5/29/02
(0)
Re: plastic tanks needs opinion
-
Tim
07:14:29 5/26/02
(3)
Re: plastic tanks needs opinion
-
Mandy
18:11:18 5/27/02
(1)
Re: plastic tanks needs opinion
-
Tim
14:58:44 6/02/02
(0)
Re: plastic tanks needs opinion
-
Andy B.
11:17:38 5/27/02
(0)
Re: plastic tanks needs opinion
-
Bootlegger
15:57:57 5/25/02
(7)
Nope, wasn`t me. Hatteras has been using plastic tanks
-
Mike Gildea
22:39:32 5/27/02
(5)
Re: Nope, wasn`t me. Hatteras has been using plastic tanks
-
BP
13:05:31 5/28/02
(4)
Re: Nope, wasn`t me. Hatteras has been using plastic tanks
-
Mandy
19:53:52 5/28/02
(2)
Hey, I didn`t say any of that! Don`t misquote me,
-
Mike Gildea
22:02:26 5/28/02
(1)
My Fault
-
Bootlegger
23:16:23 5/28/02
(0)
Re: Nope, wasn`t me. Hatteras has been using plastic tanks
-
Mandy
19:38:04 5/28/02
(0)
Re: plastic tanks needs opinion
-
Bootlegger
16:00:50 5/25/02
(0)
Re: plastic tanks needs opinion
-
Andy B.
10:45:38 5/25/02
(2)
Re: plastic tanks needs opinion
-
Mandy
08:44:18 5/26/02
(1)
Re: plastic tanks needs opinion
-
Andy B.
11:14:47 5/27/02
(0)
prop for sale?
-
paragod
01:05:14 5/25/02
(1)
Re: prop for sale?
-
BP
16:08:55 5/30/02
(0)
Wood on Bottom - Revisited
-
Chris - Key West
23:02:42 5/23/02
(3)
Re: Wood on Bottom - Revisited
-
Bob Sullivan
08:38:17 5/24/02
(0)
Re: Wood on Bottom - Revisited
-
Ed Mitchell
07:19:45 5/24/02
(1)
Re: Wood on Bottom - Revisited
-
Chris - Key West
15:02:37 5/24/02
(0)
BLISTERS!!!! - Yuck!
-
Chris - Key West
22:30:29 5/23/02
(5)
Re: BLISTERS!!!! - Yuck!
-
paragod
01:29:14 5/25/02
(4)
Re: BLISTERS!!!! - Yuck!
-
Chris - Key West
23:57:30 5/25/02
(3)
Re: BLISTERS!!!! - Yuck!
-
Rusty
10:26:57 5/27/02
(2)
Re: BLISTERS!!!! - Yuck!
-
Chris - Key West
21:56:30 5/27/02
(1)
Re: BLISTERS!!!! - Yuck!
-
rusty
21:48:30 5/28/02
(0)
Wiring Diagram is messed up on this BB
-
Capt.Ron Pagliaro
20:59:19 5/23/02
(0)
Tunneler Penn Yan Hats - update
-
Capt. Dan Thomson
13:02:09 5/23/02
(2)
Re: Tunneler Hats - sample stiching
-
Capt. Dan Thomson
09:53:24 5/24/02
(1)
Oops - try this one!
-
Capt. Dan Thomson
09:55:45 5/24/02
(0)
trailer tires
-
mandy
10:27:15 5/23/02
(4)
Re: trailer tires
-
paragod
15:49:08 5/23/02
(0)
Re: trailer tires
-
Capt. Dan Thomson
11:43:39 5/23/02
(1)
Re: trailer tires
-
AlMar
12:29:32 5/23/02
(0)
Re: trailer tires
-
AlMar
10:35:34 5/23/02
(0)
bilge vents
-
Erik Jakobs
21:54:55 5/22/02
(5)
Re: bilge vents
-
Mike W.
19:05:37 5/23/02
(0)
Re: bilge vents
-
Capt. Dan Thomson
11:47:47 5/23/02
(1)
Re: bilge vents
-
Andy B.
13:49:44 5/23/02
(0)
Re: bilge vents
-
Chuck Rothert
10:00:26 5/23/02
(1)
Re: bilge vents
-
rusty
21:08:35 5/23/02
(0)
360 Chrysler/This should open a new can of worms.
-
Capt.Ron
18:00:14 5/22/02
(4)
Re: 360 Chrysler/This should open a new can of worms.
-
Seafoam
09:08:51 5/23/02
(0)
Re: 360 Chrysler/This should open a new can of worms.
-
S.Dygert
08:24:48 5/23/02
(2)
Why backwards???? ROTATION
-
Capt.Ron Pagliaro
12:53:02 5/23/02
(1)
Re: Why backwards???? ROTATION
-
Andy B.
13:58:39 5/23/02
(0)
73 explorer ?
-
jim
14:41:38 5/22/02
(2)
electrical
-
Seafoam
09:14:18 5/23/02
(0)
Re: 73 explorer ?
-
Seafoam
08:53:37 5/23/02
(0)
propeller blades widenes @ high
-
Mandy
13:06:22 5/22/02
(5)
Re: propeller blades widenes @ high
-
Chuck Rothert
17:42:22 5/22/02
(4)
Re: propeller blades widenes @ high
-
Mandy
00:54:11 5/23/02
(3)
Re: propeller blades widenes @ high
-
Chuck Rothert
09:36:05 5/23/02
(0)
Re: propeller blades widenes @ high
-
almar
06:34:04 5/23/02
(1)
Re: propeller blades widenes @ high
-
David
09:46:04 5/23/02
(0)
Where do you guys get parts
-
Josh-KW
11:44:39 5/22/02
(3)
Re: Where do you guys get parts
-
Chris - Key West
22:40:38 5/23/02
(0)
Re: Where do you guys get parts
-
capt. Dan Thomson
12:13:10 5/22/02
(1)
Re: Where do you guys get parts
-
Josh-KW
15:21:23 5/22/02
(0)
dust in gas tanks. propeller wing wide @ sise tires trailer
-
Mandy
10:08:03 5/22/02
(1)
Re: dust in gas tanks. propeller wing wide @ sise tires trailer
-
almar
11:01:54 5/22/02
(0)
Pop Prop Quiz
-
Paul Welch
00:07:27 5/22/02
(2)
Re: Pop Prop Quiz
-
Capt. Dan Thomson
09:27:13 5/22/02
(0)
Re: Pop Prop Quiz
-
Capt. Dan Thomson
09:23:32 5/22/02
(0)
318 Specs
-
Lawdog
22:15:01 5/21/02
(3)
Re: 318 Specs
-
Capt. Dan Thomson
09:22:33 5/22/02
(2)
Re: 318 Specs
-
Lawdog
22:04:17 5/22/02
(1)
You are very correct---4000 RPM @ WOT
-
Mike Gildea
22:42:23 5/22/02
(0)
Confusion
-
Bob Sullivan
17:19:08 5/21/02
(0)
Rotation Iam confused sorry, Stupid paramedic
-
paragod
16:40:53 5/21/02
(4)
Re: Rotation Iam confused sorry, Stupid paramedic
-
Rusty
09:11:52 5/22/02
(0)
Re: Rotation Iam confused
-
Andy B.
22:08:34 5/21/02
(0)
Re: Rotation Iam confused sorry, Stupid paramedic
-
BP
16:42:18 5/21/02
(1)
Re: Rotation Iam confused sorry, Stupid paramedic
-
Bob Sullivan
08:06:50 5/22/02
(0)
dust in gas tanks
-
Armando Cruz
11:44:23 5/21/02
(3)
dust in gas tanks
-
Mike Gildea
18:56:28 5/21/02
(0)
Re: dust in gas tanks
-
Jorge Brunet
15:43:22 5/21/02
(1)
Re: dust in gas tanks
-
almar
07:10:13 5/22/02
(0)
New "Project"
-
Josh-KW
10:28:37 5/21/02
(5)
Re: New "Project"
-
Andy B.
12:38:21 5/21/02
(4)
Re: New "Project"
-
Josh-KW
14:47:46 5/21/02
(3)
Huh???
-
Andy B.
22:12:10 5/21/02
(2)
Re: Huh???
-
Josh-KW
08:05:23 5/22/02
(1)
Re: Huh???
-
Chris - Key West
22:45:49 5/23/02
(0)
Getting started
-
JoshKW
09:47:59 5/21/02
(0)
20 1/2 foot cuddy engine replacement
-
Adam Costanza
00:09:59 5/21/02
(1)
Re: 20 1/2 foot cuddy engine replacement
-
Capt. Dan Thomson
08:37:02 5/21/02
(0)
Chuck nice pics @ Your web page/couple of questions
-
Capt.Ron Pagliaro
22:12:54 5/20/02
(2)
Re: Chuck nice pics @ Your web page/couple of questions
-
Chuck Rothert
07:32:42 5/21/02
(0)
Re: Chuck nice pics @ Your web page/couple of questions
-
Bootlegger
23:49:53 5/20/02
(0)
Penn Yan Restoration
-
Tony Kline
16:57:57 5/20/02
(2)
Re: Penn Yan Restoration
-
Bev
15:07:16 5/30/02
(1)
Re: Penn Yan Restoration
-
rusty
07:45:47 6/01/02
(0)
Thank You Eric!! THE PROPELLER GOD.
-
Chuck Rothert
12:49:48 5/20/02
(6)
Re: Thank You Eric!! THE PROPELLER GOD.
-
Brett Peck
15:30:13 5/20/02
(0)
GO GO CHUCKIE GO!
-
Seafoam
14:10:25 5/20/02
(0)
Re: Thank You Eric!! THE PROPELLER GOD.
-
Brian G.
13:33:01 5/20/02
(3)
Re: Thank You Eric!! THE PROPELLER GOD.
-
Chuck Rothert
07:41:17 5/21/02
(2)
Re: Thank You Eric!! THE PROPELLER GOD.
-
Brian G.
12:36:38 5/21/02
(1)
Re: Thank You Eric!! THE PROPELLER GOD.
-
Chuck Rothert
15:04:08 5/21/02
(0)
Lucky Bum!!!
-
Brett Peck
12:34:48 5/20/02
(1)
Re: Lucky Bum!!!
-
Chuck Rothert
12:58:42 5/20/02
(0)
engine died
-
Jay
09:25:12 5/20/02
(4)
Re: engine died
-
Josh-KW
11:38:32 5/22/02
(1)
Re: engine died
-
Jay
15:31:23 5/22/02
(0)
Re: engine died
-
Chuck Rothert
10:47:46 5/20/02
(1)
Re: engine died
-
Seafoam
11:04:54 5/20/02
(0)
Uno Mas is sick! need help Engine dead !
-
paragod
22:56:01 5/19/02
(1)
Re: Uno Mas is sick! need help Engine dead !
-
Seafoam
11:17:39 5/20/02
(0)
new pictures of Lucky Bum II
-
Ryan Rothert
16:27:51 5/19/02
(0)
Hard Starting Cry 318
-
Dean Georgatos
16:14:54 5/19/02
(1)
Hard Starting
-
Mike Gildea
19:56:37 5/19/02
(0)
LH 12X14 OJ prop for $150
-
Capt. Dan Thomson
21:39:11 5/17/02
(6)
PICTURE LH 12X14 OJ ($100)
-
Capt. Dan Thomson
10:10:50 5/28/02
(0)
Re: LH 12X14 OJ prop for $100
-
Capt. Dan Thomson
11:05:31 5/22/02
(2)
Re: LH 12X14 OJ prop for $100
-
Charles Thomas
22:14:09 5/23/02
(1)
Re: LH 12X14 OJ prop for $100
-
Capt. Dan Thomson
09:49:05 5/24/02
(0)
Re: LH 12X14 OJ prop for $150
-
Paul Welch
11:32:34 5/19/02
(1)
Re: LH 12X14 OJ prop for $150
-
Capt. Dan Thomson
08:19:13 5/21/02
(0)
Advice needed - re-powering a 1970 23' Sportsman Flybridge
-
Brian Costello
20:34:01 5/17/02
(3)
Find new mechanic
-
Mike Gildea
17:29:25 5/18/02
(0)
Re: Advice needed - re-powering a 1970 23' Sportsman Flybridge
-
CapnRick
22:28:04 5/17/02
(1)
Re: Advice needed - re-powering a 1970 23' Sportsman Flybridge
-
Brian
23:14:35 5/21/02
(0)
FS: 318 Service manual
-
Capt. David Pierucci
14:12:48 5/17/02
(3)
Re: FS: 318 Service manual
-
Capt.Ron
10:15:00 5/18/02
(0)
Re: FS: 318 Service manual
-
Ken Blad
07:20:23 5/18/02
(1)
Re: FS: 318 Service manual
-
Capt. David Pierucci
07:15:27 5/19/02
(0)
Shaft alignment/step by step
-
Capt.Ron
09:32:08 5/17/02
(3)
Re: Shaft alignment/step by step
-
BP
16:40:59 5/21/02
(0)
Re: Shaft alignment/step by step
-
captnbobby
11:40:33 5/17/02
(0)
Re: Shaft alignment/step by step
-
Chuck Rothert
10:13:15 5/17/02
(0)
$900 Penn Yan
-
Jorge
23:09:53 5/16/02
(3)
That`s not a 24'
-
Mike gildea
20:05:38 5/19/02
(1)
Re: That`s not a 24'
-
Brett Peck
11:59:08 5/20/02
(0)
BE CAREFUL
-
Seafoam
06:48:28 5/17/02
(0)
Heat Exchanger ???????
-
paragod
00:33:26 5/16/02
(2)
Re: Heat Exchanger ???????
-
Ed Mitchell
21:33:50 5/16/02
(0)
Re: Heat Exchanger ???????
-
BP
12:33:48 5/16/02
(0)
Tunneler Penn Yan Hats
-
Capt. Dan Thomson
09:43:27 5/15/02
(15)
Re: Tunneler Penn Yan Hats
-
Jay Berkowitz
21:50:00 6/04/02
(0)
Re: Tunneler Penn Yan Hats
-
Ray
17:19:48 5/23/02
(0)
Re: Tunneler Penn Yan Hats
-
Josh-KW
10:58:29 5/21/02
(0)
Re: Tunneler Penn Yan Hats
-
Rich
18:13:58 5/20/02
(0)
Re: Tunneler Penn Yan Hats
-
Paul Welch
08:51:07 5/19/02
(0)
Re: Tunneler Penn Yan Hats
-
Capt. Dan Thomson
09:19:47 5/17/02
(0)
Re: Tunneler Penn Yan Hats
-
Capt. Dan Thomson
09:17:19 5/17/02
(0)
Re: Tunneler Penn Yan Hats
-
Chuck Rothert
08:50:51 5/16/02
(0)
Re: Tunneler Penn Yan Hats
-
Ken Blad
20:35:41 5/15/02
(0)
Re: Tunneler Penn Yan Hats
-
Bill Bullock
20:07:56 5/15/02
(0)
Re: Tunneler Penn Yan Hats
-
Tim D
18:25:22 5/15/02
(0)
Re: Tunneler Penn Yan Hats
-
Bob Sullivan
16:00:53 5/15/02
(0)
Re: Tunneler Penn Yan Hats
-
Capt.Ron Pagliaro
15:19:58 5/15/02
(0)
Re: Tunneler Penn Yan Hats
-
Almar
10:27:37 5/15/02
(0)
Re: Tunneler Penn Yan Hats
-
Seafoam
10:19:26 5/15/02
(0)
Hot Water Heater--Raw Water Hot Enough?
-
Steve Lawson
02:30:55 5/15/02
(1)
Re: Hot Water Heater--Raw Water Hot Enough?
-
Bill P.
17:06:21 5/18/02
(0)
This Might Help
-
Seafoam
15:33:26 5/14/02
(0)
$564.78
-
Seafoam
10:50:57 5/14/02
(4)
Re: $564.78
-
Mike Wood
23:33:22 5/15/02
(1)
Re: $564.78
-
Seafoam
06:30:42 5/16/02
(0)
Re: $564.78
-
Bob Sullivan (Sully)
16:25:31 5/14/02
(1)
Re: $564.78
-
Seafoam
10:16:53 5/15/02
(0)
Frozen Engine and Elec
-
Russ
10:24:31 5/14/02
(2)
Re: Frozen Engine and Elec
-
Ray
07:33:36 5/17/02
(1)
Re: Frozen Engine and Elec
-
Russ
12:52:34 5/17/02
(0)
Seafoam II
-
Capt.Ron
17:18:51 5/13/02
(4)
Re: Seafoam II
-
Seafoam II
10:34:55 5/14/02
(0)
Re: Seafoam II
-
Chuck Rothert
17:53:09 5/13/02
(2)
Montego Convertibles
-
Capt.Ron Pagliaro
18:34:40 5/13/02
(1)
Re: Montego Convertibles
-
Chuck Rothert
19:18:20 5/13/02
(0)
OJ 4 Blade Prop
-
Vic Hansen
16:16:07 5/13/02
(7)
Re: OJ 4 Blade Prop
-
Lenny from LI
13:12:55 5/17/02
(0)
Re: OJ 4 Blade Prop
-
Lenny from LI
13:12:21 5/17/02
(1)
Re: OJ 4 Blade Prop
-
Vic Hansen
15:54:50 5/17/02
(0)
Re: OJ 4 Blade Prop
-
Chuck Rothert
17:50:36 5/13/02
(1)
Re: OJ 4 Blade Prop
-
Vic Hansen
11:46:18 5/14/02
(0)
Re: OJ 4 Blade Prop
-
Chuck Rothert
17:49:28 5/13/02
(0)
Re: OJ 4 Blade Prop
-
Seafoam
17:00:23 5/13/02
(0)
OJ 4 Blade Prop
-
Vic Hansen
16:14:58 5/13/02
(0)
OJ 4 Blade Prop
-
Vic Hansen
16:13:21 5/13/02
(0)
steering cable
-
mike mosko
08:06:27 5/12/02
(2)
Re: steering cable
-
Dan Thomson
09:32:32 5/13/02
(0)
Re: steering cable
-
Ed Mitchell
08:20:15 5/12/02
(0)
For Sale: 76 Avenger w/trailor on Potomac River
-
Burney
23:23:35 5/10/02
(0)
20.5 Explorer 1971
-
Paul Welcw
22:53:16 5/10/02
(2)
Re: 20.5 Explorer 1971
-
Dan Thomson
09:48:31 5/13/02
(1)
Re: 20.5 Explorer 1971
-
Paul Welch
21:32:06 5/14/02
(0)
Penn Reel Parts
-
Bob Boyd
22:35:35 5/10/02
(0)
Velvet drive tranny for sale on e-Bay
-
Capt.Ron
15:46:22 5/10/02
(3)
Shipping costs
-
Andy B.
18:08:28 5/10/02
(2)
Re: Shipping costs
-
Bootlegger Don
09:25:47 5/12/02
(1)
Re: Shipping costs
-
Andy B.
10:10:53 5/13/02
(0)
Seafoam...re: correct prop
-
Capt.Ron
15:21:40 5/10/02
(1)
Re: Seafoam...re: correct prop
-
Seafoam
17:07:21 5/10/02
(0)
Roll Call
-
Tim D
22:33:31 5/09/02
(70)
Re: Roll Call
-
Jay Berkowitz
00:19:34 6/11/02
(0)
Re: Roll Call
-
Jay Berkowitz
00:11:42 6/11/02
(0)
Re: Roll Call
-
Jay Berkowitz
00:11:05 6/11/02
(0)
Re: Roll Call
-
Bill Schlegel
11:26:15 6/03/02
(0)
Re: Roll Call
-
gene
20:30:17 5/28/02
(0)
1982 PY 25' Model 25W (I think)
-
Chris - Key West
23:06:58 5/23/02
(0)
Re: Roll Call
-
Josh-KW
11:09:00 5/21/02
(0)
Re: Roll Call
-
Bill P.
17:16:22 5/18/02
(0)
Re: Roll Call
-
Paul Otto
23:33:50 5/17/02
(0)
1972 20.5 Explorer, 225 HP (318 CI)
-
Gary H. Stokes
09:17:06 5/17/02
(1)
Re: 1972 20.5 Explorer, 225 HP (318 CI)
-
Ryan Rothert
16:31:18 5/19/02
(0)
Re: Roll Call
-
Alan Miller
06:29:50 5/16/02
(0)
Re: Roll Call
-
Mike Wood
23:22:35 5/15/02
(0)
Re: Roll Call
-
Capn Rick
18:20:08 5/15/02
(1)
Re: Roll Call
-
Gordon Bird
21:24:31 5/15/02
(0)
Re: Roll Call
-
Burney
16:19:30 5/15/02
(0)
Re: Roll Call
-
Brett Peck
12:03:49 5/15/02
(0)
Re: Roll Call
-
Bill Bullock
08:58:13 5/15/02
(0)
Re: Roll Call
-
John Humphrys
07:21:14 5/15/02
(0)
Re: Roll Call
-
Paul Welch
21:45:29 5/14/02
(0)
Re: Roll Call
-
Bob R
21:14:39 5/14/02
(0)
Re: Roll Call
-
Jim Robinson
15:05:56 5/14/02
(4)
Re: Roll Call
-
rusty
21:28:25 5/15/02
(3)
Re: Roll Call
-
BP
12:36:48 5/16/02
(2)
Re: Roll Call
-
rusty
21:44:19 5/17/02
(0)
Re: Roll Call
-
mike shamroy
17:08:13 5/17/02
(0)
Re: Roll Call
-
Steve T.
12:58:56 5/14/02
(0)
Re: Roll Call
-
Bdriller
12:11:55 5/14/02
(0)
Re: Roll Call
-
Steve Dygert
11:53:57 5/14/02
(0)
Re: Roll Call
-
Mike H.
10:05:41 5/14/02
(0)
Re: Roll Call
-
Lenny from LI
09:37:48 5/14/02
(0)
Re: Roll Call
-
Rob
09:25:45 5/14/02
(0)
Re: Roll Call
-
Slow Poke
00:00:52 5/14/02
(0)
Re: Roll Call
-
Jorge Brunet
23:00:22 5/13/02
(0)
Re: Roll Call
-
Tim D
19:18:09 5/13/02
(0)
Re: Roll Call
-
CaptainB
19:06:34 5/13/02
(0)
Re: Roll Call
-
Jim Cowan
17:31:31 5/13/02
(0)
Re: Roll Call
-
Ray
17:15:40 5/13/02
(0)
Re: Roll Call
-
Russ Mills
17:09:14 5/13/02
(0)
Re: Roll Call
-
Stoni
16:16:05 5/13/02
(0)
Re: Roll Call
-
Al Devernoe
15:54:44 5/13/02
(0)
Re: Roll Call '74 avenger f/b
-
alMar
15:40:12 5/13/02
(0)
Re: Roll Call
-
Vic Hansen
14:45:00 5/13/02
(0)
Re: Roll Call
-
Chuck Rothert
13:33:30 5/13/02
(0)
Re: Roll Call
-
Todd M
13:31:53 5/13/02
(0)
Re: Roll Call
-
Ben Cook
13:09:26 5/13/02
(0)
Re: Roll Call
-
TWISTEDOAK
12:57:30 5/13/02
(0)
Re: Roll Call
-
Brian G.
12:43:47 5/13/02
(0)
Re: Roll Call
-
Fred Schanz
11:38:26 5/13/02
(0)
Re: Roll Call
-
Seafoam III
10:17:35 5/13/02
(0)
Re: Roll Call
-
Seafoam II
10:16:20 5/13/02
(0)
Re: Roll Call
-
Andy B.
10:14:02 5/13/02
(0)
Re: Roll Call
-
Seafoam I
10:09:42 5/13/02
(0)
1969 Explorer Cuddy 20.5
-
Capt. Dan Thomson
10:02:33 5/13/02
(0)
Re: Roll Call
-
Bootlegger
08:20:06 5/13/02
(0)
Re: Roll Call
-
Bill H
08:00:04 5/13/02
(0)
Re: Roll Call
-
Bob Sullivan
07:20:14 5/13/02
(0)
Re: Roll Call
-
Rusty
06:59:29 5/13/02
(0)
Re: Roll Call
-
JOHN VAN LOON
00:24:46 5/13/02
(0)
Re: Roll Call
-
paragod
16:31:03 5/12/02
(0)
1978 23 Avenger Sportsman Hardtop "Wanderer"
-
Capt. David Pierucci
13:54:58 5/12/02
(0)
Re: Roll Call
-
Sandy the Limey
12:36:46 5/12/02
(1)
Re: Roll Call
-
Budd
09:10:54 5/15/02
(0)
Re: Roll Call
-
Steve Lawson
01:36:28 5/12/02
(0)
Re: Roll Call
-
Wayne
21:48:40 5/11/02
(0)
Re: Roll Call
-
Dean Georgatos
21:35:45 5/11/02
(0)
Re: Roll Call
-
Capt. Bob
19:17:03 5/11/02
(0)
Re: Roll Call
-
Bill R.
16:11:50 5/10/02
(0)
Re: Roll Call
-
Valhalla
15:02:32 5/10/02
(0)
1974 Penn Yan Montego/21'9"
-
Capt.Ron Pagliaro
14:56:12 5/10/02
(0)
Just bought 1984 20' cuddy fisherman
-
Tom Lombardo
21:40:22 5/09/02
(0)
converting engine rotation from LH to RH
-
Ed Mitchell
19:30:34 5/09/02
(4)
Re: converting engine rotation from LH to RH
-
Brett Peck
11:34:10 5/10/02
(3)
Re: converting engine rotation from LH to RH
-
Chuck Rothert
12:04:24 5/10/02
(2)
Re: converting engine rotation from LH to RH
-
Ed Mitchell
22:01:04 5/10/02
(1)
Re: converting engine rotation from LH to RH
-
Chuck Rothert
08:55:23 5/11/02
(0)
LH OR RH DONT KNOW
-
BOB R
12:45:50 5/08/02
(1)
Rev. Rot. = Right H. prop
-
Andy B.
13:03:49 5/08/02
(0)
Shaft Alignment ?
-
Ken R AZ
00:02:26 5/08/02
(1)
Re: Shaft Alignment ?
-
Down Time
01:03:14 5/08/02
(0)
The search for a 340 or 360 for my 74 Montego
-
Capt.Ron
16:36:40 5/07/02
(13)
Re: The search for a 340 or 360 for my 74 Montego
-
Seafoam
15:01:15 5/08/02
(8)
Project engine
-
Capt.Ron
15:55:17 5/08/02
(7)
Re: Project engine
-
Seafoam
17:49:22 5/08/02
(6)
Seafoam...re: Project engine 340/360
-
Capt.Ron
22:19:44 5/08/02
(5)
Re: Seafoam...re: Project engine 340/360
-
Brad
15:51:51 5/09/02
(0)
Re: Seafoam...re: Project engine 340/360
-
mts4794@aol.com
14:04:39 5/09/02
(1)
Sorry,no 350 Chevy
-
Capt.Ron
15:33:35 5/09/02
(0)
Re: Seafoam...re: Project engine 340/360
-
Seafoam
09:18:58 5/09/02
(1)
re: Project engine 340/360
-
Capt. Ron
11:14:16 5/09/02
(0)
Re: The search for a 340 or 360 for my 74 Montego
-
Wayne
20:14:15 5/07/02
(3)
Wayne,got any pics
-
Capt.Ron
23:21:08 5/07/02
(2)
Re: Wayne,got any pics
-
Wayne
09:52:38 5/09/02
(1)
Montego Pic's
-
Capt.Ron
15:35:52 5/09/02
(0)
CHRIS>>Help Please - Wood on bottom of 82 PY - PICS
-
Capt.Ron
13:40:11 5/07/02
(1)
Re: CHRIS>>Help Please - Wood on bottom of 82 PY - PICS
-
Chris - Key West
14:33:45 5/07/02
(0)
LH OR RH PROP NOT SURE
-
BOB R
12:42:55 5/07/02
(4)
Re: LH OR RH PROP NOT SURE
-
rusty
21:35:25 5/07/02
(0)
Confusion
-
Mike Gildea
19:31:03 5/07/02
(1)
Re: Confusion
-
Seafoam
08:12:49 5/08/02
(0)
Re: LH OR RH PROP NOT SURE
-
Seafoam
13:54:08 5/07/02
(0)
$355
-
Seafoam
12:35:42 5/07/02
(12)
Re: $355
-
Tim D
22:23:25 5/09/02
(1)
Re: $355
-
Seafoam
08:06:46 5/10/02
(0)
Re: $355
-
Capt.Ron
22:24:33 5/08/02
(1)
Re: $355
-
Seafoam
09:21:14 5/09/02
(0)
Re: $355
-
Ray
18:27:42 5/07/02
(3)
Re: $355
-
Seafoam
08:15:47 5/08/02
(2)
Re: $355
-
Ray
22:51:32 5/09/02
(1)
Re: $355
-
Seafoam
08:08:03 5/10/02
(0)
Re: $355
-
Russ
17:55:56 5/07/02
(3)
Re: $355
-
Seafoam
08:18:05 5/08/02
(2)
Re: $355
-
Capt. Bob
21:10:10 5/08/02
(1)
Re: $355
-
Seafoam
09:24:46 5/09/02
(0)
Penn Yan
-
robert stevenson
10:02:58 5/07/02
(2)
Re: Penn Yan
-
Seafoam
12:48:46 5/07/02
(0)
Re: Penn Yan
-
BP
11:41:02 5/07/02
(0)
Bell housing for GMC 350 required.
-
Sandy the Limey
09:27:17 5/07/02
(1)
Re: Bell housing for GMC 350 required.
-
gmeseroll
19:47:43 5/07/02
(0)
ELECTRICAL DIAGRAM
-
Frank
22:31:35 5/06/02
(0)
engine struggles - 76 Avenger
-
Burney
21:50:07 5/05/02
(4)
and the answer was mixed plug wires
-
Burney
21:27:55 5/07/02
(0)
Re: engine struggles - (and) Remove and Replace?
-
Burney
21:55:26 5/06/02
(0)
Re: engine struggles - 76 Avenger
-
Down Time
18:36:03 5/06/02
(0)
Re: engine struggles - 76 Avenger
-
Mike Gildea
23:18:12 5/05/02
(0)
23' Avenger 1970
-
holtz
19:46:08 5/04/02
(3)
Dwell
-
Mike gildea
23:23:09 5/05/02
(1)
Re: Dwell
-
holtz
17:11:22 5/06/02
(0)
Re: 23' Avenger 1970
-
Ken Blad
20:06:37 5/04/02
(0)
Another boat fix it site
-
Capt.Ron
19:02:39 5/04/02
(3)
It's not Netscape friendly!
-
Andy B.
15:40:49 5/07/02
(2)
DUDE,Netscape is not friendly!!!
-
Capt.Ron
22:38:59 5/08/02
(1)
Re: DUDE,Netscape is not friendly!!!
-
Andy B.
18:14:31 5/10/02
(0)
Trailer Question -- Rollers or Bunks
-
Chris - Key West
14:04:22 5/04/02
(6)
Re: Trailer Question -- Rollers or Bunks
-
Al Devernoe
07:46:21 5/07/02
(0)
Re: Trailer Question -- Rollers or Bunks
-
rusty
22:04:27 5/06/02
(1)
RUSTY - Re: Trailer Question -- Rollers or Bunks
-
Chris - Key West
14:36:51 5/07/02
(0)
Re: Trailer Question -- Rollers or Bunks
-
Dale Tanski
15:16:14 5/06/02
(1)
Re: Trailer Question -- Rollers or Bunks
-
JOHN MCGREEN
20:43:27 5/11/02
(0)
Rollers or Bunks
-
Mike Gildea
23:35:53 5/05/02
(0)
Hull sq. footage for my 25' PY
-
Chris - Key West
13:59:53 5/04/02
(3)
Re: Hull sq. footage for my 25' PY
-
AlMar
07:20:28 5/06/02
(1)
Re: Hull sq. footage for my 25' PY
-
Chris - Key West
14:32:15 5/07/02
(0)
Re: Hull sq. footage for my 25' PY
-
paragod
01:48:44 5/05/02
(0)
1957 seaking
-
donna
14:25:45 5/03/02
(7)
Re: 1957 seaking
-
donna
09:29:32 5/08/02
(5)
Re: 1957 seaking
-
Phillip
23:44:38 5/12/02
(4)
Re: 1957 seaking
-
donna
22:44:46 5/16/02
(3)
Re: 1957 seaking
-
Phillip
16:42:49 5/21/02
(2)
Re: 1957 seaking
-
donna
22:11:01 5/28/02
(1)
Re: 1957 seaking
-
Donna
12:23:26 5/29/02
(0)
Re: 1957 seaking
-
Bootlegger Ddo
08:06:03 5/04/02
(0)
seaking
-
donna comfort
14:16:39 5/03/02
(0)
seaking
-
donna comfort
14:10:38 5/03/02
(0)
Stainless Steel Tanks
-
alMar
13:56:20 5/03/02
(7)
Re: Stainless Steel Tanks
-
BP
17:37:28 5/06/02
(6)
Re: Stainless Steel Tanks
-
almar
09:22:49 5/07/02
(5)
Re: Stainless Steel Tanks
-
almar
12:32:42 5/07/02
(0)
Re: Stainless Steel Tanks
-
Bob G
11:48:26 5/07/02
(3)
Re: Stainless Steel Tanks
-
Brett Peck
14:58:10 5/08/02
(2)
Re: Stainless Steel Tanks
-
Bob G
08:54:41 5/09/02
(1)
Re: Stainless Steel Tanks
-
BP
11:45:07 5/09/02
(0)
72 20' PY For Sale
-
budd
09:25:01 5/03/02
(0)
Installing Hydraulic Steering
-
Tim D
08:33:34 5/02/02
(3)
Hydraulic Steering Ram
-
Mike Gildea
23:42:55 5/05/02
(0)
Re: Installing Hydraulic Steering
-
Andy B.
11:05:10 5/02/02
(1)
correction
-
Andy B.
21:24:51 5/02/02
(0)
throttle cable 1974 20.5 EXPLORER
-
cy boy
23:42:39 5/01/02
(1)
Re: throttle cable 1974 20.5 EXPLORER
-
paragod
23:57:53 5/01/02
(0)
Trim Tabs
-
Paul Welch
22:18:34 5/01/02
(3)
Re: Trim Tabs
-
Dale Tanski
11:07:26 5/02/02
(2)
Re: Trim Tabs
-
Paul Welch
21:55:29 5/12/02
(1)
Re: Trim Tabs
-
Paul Welch
22:03:57 5/12/02
(0)
Info on 1968 20 ft I/O
-
Ben Cook
15:27:07 5/01/02
(1)
Re: Info on 1968 20 ft I/O
-
ken carney
19:33:17 5/27/02
(0)
Head Trip
-
Capt. Ron
13:57:19 5/01/02
(1)
Head Trip
-
Mike Gildea
21:55:09 5/01/02
(0)
360 flywheel
-
AlMar
10:56:13 5/01/02
(4)
Re: 360 flywheel
-
L.C.
08:58:38 5/02/02
(2)
Re:L.C> 360 flywheel
-
almar
12:21:31 5/02/02
(1)
Re:L.C> 360 flywheel
-
L.C.
08:46:30 5/03/02
(0)
360 flywheel
-
Mike Gildea
22:04:35 5/01/02
(0)
Netscape & this bbs
-
Chuck Rothert
14:42:50 4/30/02
(5)
Netscape is not friendly!!!
-
Capt.Ron
22:43:24 5/08/02
(0)
Re: Netscape & this bbs
-
almar
15:03:28 4/30/02
(3)
Drop back to 4.73 and punt.
-
Andy B.
10:16:14 5/01/02
(1)
Re: Drop back to 4.73 and punt.
-
almar
10:18:58 5/01/02
(0)
Re: Netscape & this bbs
-
Chuck Rothert
15:11:33 4/30/02
(0)
26 ft PY twin fix-em up.
-
Andy B.
14:11:36 4/30/02
(1)
Re: 26 ft PY twin fix-em up.
-
Bill P
00:35:56 5/16/02
(0)
340/360 Motorheads please!
-
AlMar
13:50:46 4/30/02
(8)
Re: 340/360 Motorheads please!
-
Wayne
16:42:45 4/30/02
(0)
I'll have a "340" please
-
Seafoam
15:15:20 4/30/02
(0)
Re: 340/360 Motorheads please!
-
Mark
14:42:36 4/30/02
(0)
Re: 340/360 Motorheads please!
-
L.C.
14:23:35 4/30/02
(1)
Re: 340/360 Motorheads please!
-
Down Time
05:55:36 5/01/02
(0)
Post Message link broken?
-
Andy B.
14:05:40 4/30/02
(2)
Re: Post Message link broken?
-
almar
15:01:57 4/30/02
(1)
Re: Post Message link broken?
-
Andy B.
10:20:46 5/01/02
(0)
Tanks, but no tanks!
-
AlMar
10:35:42 4/30/02
(4)
Re: Tanks, but no tanks!
-
TIM DILLON
08:06:11 5/02/02
(3)
Re: Tanks, but no tanks!
-
almar
11:27:39 5/02/02
(1)
Re: Tanks,Tim
-
almar
13:37:44 5/08/02
(0)
Re: Tanks, but no tanks!
-
almar
11:27:17 5/02/02
(0)
open water moorings
-
Alan Miller
17:35:47 4/29/02
(4)
Re: open water moorings
-
Down Time
06:00:22 5/01/02
(0)
Re: open water moorings
-
Gary
09:25:13 4/30/02
(0)
Re: open water moorings
-
Chuck Rothert
09:00:00 4/30/02
(1)
Re: open water moorings
-
Alan Miller
18:53:20 5/02/02
(0)
Trim Tabs...Again
-
Steve Lawson
21:34:00 4/27/02
(2)
Re: Trim Tabs...Again
-
Ed Mitchell
21:44:01 4/28/02
(1)
Re: Trim Tabs...Again
-
Brian
12:32:34 4/30/02
(0)
1975 20.5 Penn Yan Replacing foam floatation under decking
-
Ken Blad
16:10:17 4/27/02
(0)
1975 20.5 Penn Yan Replacing foam Floatation
-
Ken Blad
16:01:55 4/27/02
(1)
Re: 1975 20.5 Penn Yan Replacing foam Floatation
-
AlMar
08:33:08 4/30/02
(0)
Gas vs. Range
-
Lenny from LI
09:11:08 4/26/02
(8)
Re: Gas vs. Range
-
Sandy the Limey
08:36:55 5/02/02
(0)
Re: Gas vs. Range
-
Sandy the Limey
08:16:38 5/02/02
(0)
double screwed
-
Mike Gildea
21:55:30 4/29/02
(0)
Re: Gas vs. Range
-
Steve Lawson
20:55:50 4/27/02
(0)
Re: Gas vs. Range
-
paragod
13:15:48 4/27/02
(0)
Re: Gas vs. Range
-
BP
13:11:41 4/26/02
(0)
Re: Gas vs. Range
-
AlMar
10:31:55 4/26/02
(1)
Re: Gas vs. Range
-
Mark
13:53:39 4/26/02
(0)
Help Please - Wood on bottom of 82 PY - PICS
-
Chris - Key West
23:42:33 4/25/02
(23)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Capt. Ron
13:42:23 5/07/02
(0)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
rusty
21:42:02 4/28/02
(9)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Chris - Key West
00:11:32 4/30/02
(0)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Brett Peck
11:23:36 4/29/02
(7)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
rusty
22:06:15 4/29/02
(6)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
bp
08:16:50 5/01/02
(5)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Tis
06:49:09 5/02/02
(4)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
BP
12:49:09 5/03/02
(3)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
rusty
08:44:05 5/04/02
(2)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Brett Peck
10:46:16 5/06/02
(1)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
rusty
23:09:17 5/06/02
(0)
Is this the infamous 25 footer PY?
-
Mike Gildea
20:22:25 4/28/02
(1)
TJ - HAVE YOU HAD A CHANCE TO READ THIS THREAD??
-
Chris Key West
00:17:00 4/30/02
(0)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
browser
09:27:06 4/27/02
(4)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Chuck Rothert
15:52:08 4/27/02
(3)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Chris - Key West
21:55:21 4/27/02
(0)
OH ? Could this boat be a Penn Yan---
-
Chuck Rothert
15:57:25 4/27/02
(1)
Re: OH ? Could this boat be a Penn Yan---
-
Penn Yan
01:08:05 5/17/02
(0)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
BP
12:43:56 4/26/02
(4)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Chuck Rothert
13:21:19 4/26/02
(3)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Chris - Key West
00:35:04 4/27/02
(2)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Bootlegger
07:14:24 4/27/02
(1)
Re: Help Please - Wood on bottom of 82 PY - PICS
-
Ed Mitchell
08:18:00 4/27/02
(0)
1977 Penn Yan Hull # PYBEM243M770
-
John S. Holcomb
13:53:09 4/25/02
(5)
PYB EM 243M 770
-
Mike Gildea
20:35:09 4/28/02
(0)
Re: 1977 Penn Yan Hull # PYBEM243M770
-
Phillip W. Brown
14:42:55 4/25/02
(3)
Re: 1977 Penn Yan Hull # PYBEM243M770
-
Seafoam
16:25:37 4/25/02
(2)
Re: 1977 Penn Yan Hull # PYBEM243M770
-
BP
17:10:37 4/25/02
(1)
Re: 1977 Penn Yan Hull # PYBEM243M770
-
Seafoam
08:41:07 4/26/02
(0)
Engines/Chrysler/Mike Gilda or other motor heads
-
Capt.Ron
13:02:45 4/25/02
(2)
Chrysler Marine engines
-
Mike Gildea
20:44:42 4/28/02
(0)
Re: Engines/Chrysler/Mike Gilda or other motor heads
-
L.C.
15:13:29 4/25/02
(0)
Changed my Ellis for an OJ
-
Chuck Rothert
11:15:41 4/25/02
(13)
Re: Changed my Ellis for an OJ
-
Seafoam
16:31:41 4/25/02
(12)
Re: Changed my Ellis for an OJ
-
Chuck Rothert
16:54:40 4/25/02
(11)
Re: Changed my Ellis for an OJ
-
Seafoam
08:53:21 4/26/02
(1)
Re: Changed my Ellis for an OJ
-
Chuck Rothert
09:13:00 4/26/02
(0)
Re: Changed my Ellis for an OJ
-
Lawdog
00:51:49 4/26/02
(8)
Re: Changed my Ellis for an OJ
-
BP
13:04:16 4/26/02
(4)
Re: Changed my Ellis for an OJ
-
Lawdog
16:56:01 4/26/02
(2)
Re: Changed my Ellis for an OJ
-
BP
18:57:12 4/26/02
(1)
Re: Changed my Ellis for an OJ
-
Lawdog
19:29:14 4/26/02
(0)
Re: Changed my Ellis for an OJ
-
Chuck Rothert
13:30:41 4/26/02
(0)
Re: Changed my Ellis for an OJ
-
Seafoam
09:25:23 4/26/02
(0)
Re: Changed my Ellis for an OJ
-
Chuck Rothert
08:54:47 4/26/02
(1)
Re: Changed my Ellis for an OJ
-
Seafoam
09:28:15 4/26/02
(0)
remanufactured engines
-
Dick
22:50:44 4/24/02
(5)
Re: remanufactured engines
-
David Anderson
08:38:47 4/28/02
(0)
Re: remanufactured engines
-
Mark
13:49:14 4/26/02
(0)
Re: remanufactured engines
-
Bill R.
01:31:08 4/26/02
(0)
Re: remanufactured engines
-
Jorge
00:26:37 4/25/02
(0)
Re: remanufactured engines
-
RLM
23:15:35 4/24/02
(0)
Plastic VS Aluminium
-
AlMar
07:48:53 4/24/02
(4)
Re: Plastic VS Aluminium
-
Brett Peck
15:43:02 4/24/02
(0)
Re: Plastic VS Aluminium
-
Mark
12:49:27 4/24/02
(0)
Re: Plastic VS Aluminium
-
AlMar
08:33:39 4/24/02
(1)
Re: Plastic VS Aluminium
-
Brian
12:28:20 4/24/02
(0)
PY BBS APPRECIATION FUND
-
Seafoam
14:24:22 4/23/02
(9)
Re: PY BBS APPRECIATION FUND
-
Bill H
20:14:30 4/24/02
(0)
payable to
-
Seafoam
06:36:39 4/24/02
(0)
Re: PY BBS APPRECIATION FUND
-
Capt. David Pierucci
19:46:20 4/23/02
(0)
Re: PY BBS APPRECIATION FUND
-
Bdriller
15:40:58 4/23/02
(3)
Re: PY BBS APPRECIATION FUND
-
Capt.Ron
17:09:18 4/23/02
(1)
Re: PY BBS APPRECIATION FUND
-
Jorge
18:04:00 4/23/02
(0)
Re: PY BBS APPRECIATION FUND
-
Chuck Rothert
16:23:33 4/23/02
(0)
Re: PY BBS APPRECIATION FUND
-
CaptainB
15:39:07 4/23/02
(0)
Re: PY BBS APPRECIATION FUND
-
AlMar
14:30:46 4/23/02
(0)
No D-palm I am not kidding
-
Bdriller
09:31:54 4/23/02
(4)
AMSOIL
-
Mark
13:22:30 4/23/02
(3)
Re: AMSOIL
-
AlMar
13:45:44 4/23/02
(2)
Re: AMSOIL
-
Mark
12:45:42 4/24/02
(1)
Re: AMSOIL
-
Bootlegger
08:04:36 4/25/02
(0)
Thermostat housing 1976 318 Chrysler
-
Capt. Bob
21:32:09 4/22/02
(3)
Re: Thermostat housing 1976 318 Chrysler
-
Seafoam
13:41:26 4/23/02
(0)
Re: Thermostat housing 1976 318 Chrysler
-
Bill R.
23:31:11 4/22/02
(0)
Re: Thermostat housing 1976 318 Chrysler
-
Slow Poke
22:57:05 4/22/02
(0)
Tune up specs for a Crysler 1976 318 4bbl.
-
Dean Georgatos
19:05:50 4/22/02
(1)
Re: Tune up specs for a Crysler 1976 318 4bbl.
-
Slow Poke
00:03:57 4/23/02
(0)
Starter for 318 and Fly bridge
-
Russ
19:00:03 4/22/02
(7)
Re: Starter for 318 and Fly bridge
-
Mike W.
16:50:06 5/02/02
(0)
Re: Starter for 318 and Fly bridge
-
Bootlegger
07:59:43 4/25/02
(0)
Re: Starter for 318
-
Slow Poke
23:04:04 4/22/02
(1)
Re: Starter for 318
-
Dean Georgatos
18:31:43 4/23/02
(0)
Re: Starter for 318 and Fly bridge
-
Dean Georgatos
19:37:29 4/22/02
(0)
Re: Starter for 318 and Fly bridge
-
Lawdog
19:26:23 4/22/02
(1)
Re: Starter for 318 and Fly bridge
-
Russ
15:36:07 4/23/02
(0)
Stuffing Box Packing
-
Brian
18:41:14 4/22/02
(4)
Re: Stuffing Box Packing
-
mark
11:40:15 4/23/02
(0)
Re: Stuffing Box Packing
-
CHUCK Rothert
20:54:02 4/22/02
(2)
Re: Stuffing Box Packing
-
Mike Woods
17:07:31 4/25/02
(1)
Re: Stuffing Box Packing
-
Chuck Rothert
19:35:24 4/25/02
(0)
Please clean up your replies
-
Boater
16:50:03 4/22/02
(2)
Re: Please clean up your replies
-
Shellback
17:11:34 4/22/02
(1)
Re: Please clean up your replies
-
Andy B.
21:09:44 4/22/02
(0)
Fuel Return Systems
-
D.Palm
23:40:16 4/21/02
(11)
Re: Fuel Return Systems
-
RLM
23:32:25 4/24/02
(0)
Re: Fuel Return Systems
-
Brian
12:05:57 4/23/02
(0)
Here's how I did it.
-
Andy B.
10:49:57 4/22/02
(6)
holley projection.
-
Bill H.
12:25:05 4/22/02
(5)
Re: holley projection.
-
Andy B.
13:23:27 4/22/02
(4)
hatch clearance
-
Bill
14:31:55 4/22/02
(3)
Re: hatch clearance
-
Andy B.
21:04:57 4/22/02
(2)
Re: hatch clearance
-
Bill
09:48:58 4/23/02
(1)
Must use 4 B. manifold with Pro-jection
-
Andy B.
13:40:59 4/23/02
(0)
Re: Fuel Return Systems
-
RLM
00:12:47 4/22/02
(1)
Re: Fuel Return Systems
-
D.Palm
21:44:11 4/22/02
(0)
318 4bbl. intake manifold
-
mike shamroy
20:06:05 4/21/02
(1)
Re: 318 4bbl. intake manifold
-
mark
15:27:03 4/22/02
(0)
4 BRL INTAKE 318 SEARCH
-
Ken R AZ
04:16:49 4/21/02
(3)
Re: 4 BRL INTAKE 318 Police Special
-
Mike Gildea
12:34:31 4/21/02
(0)
Re: 4 BRL INTAKE 318 SEARCH
-
Bill H
10:03:31 4/21/02
(1)
Re: 4 BRL INTAKE 318 SEARCH
-
Mike Woods
17:16:58 4/25/02
(0)
Speaking of oil... let me share something with you...
-
Mike Gildea
22:07:41 4/20/02
(13)
You have to be kidding?
-
D.Palm
22:42:18 4/22/02
(5)
Frantz Filters are Back & Newly Re-Manufactured!
-
Deborah Walker Harley
13:18:51 5/01/02
(0)
Re: You have to be kidding? Frantz Filters are back & newly re-manufactured
-
Deborah Walker Harley
12:52:44 5/01/02
(0)
FAA approved it for aircraft, back in the 70`s
-
Mike gildea
23:58:19 4/23/02
(0)
Re: You have to be kidding?
-
Brett Peck
11:24:02 4/23/02
(1)
Re: You have to be kidding?
-
Bdriller
13:28:44 4/23/02
(0)
Re: Speaking of oil... let me share something with you...
-
D.Palm
22:00:21 4/22/02
(0)
Re: Speaking of oil... let me share something with you...
-
Brett Peck
11:59:11 4/22/02
(0)
Re: Speaking of oil... let me share something with you...
-
Bdriller
10:12:43 4/22/02
(4)
Thanks for the web site. It`s a refurbishing business...
-
Mike Gildea
00:07:32 4/24/02
(0)
Re: Speaking of oil... let me share something with you...
-
Bdriller
10:15:11 4/22/02
(2)
please clean up your replies guys!
-
Andy B.
13:29:23 4/22/02
(1)
Re: please clean up your replies guys!
-
BP
11:25:08 4/23/02
(0)
Changing a ring gear in 23ft Penn fb w/a 318
-
Dean Georgatos
21:57:16 4/20/02
(1)
Changing a ring gear
-
Mike Gildea
22:20:09 4/20/02
(0)
Bottom Painting - COSTS?????
-
Chris - Key West
18:33:17 4/20/02
(5)
Re: Bottom Painting - COSTS?????
-
Mark
15:25:24 4/22/02
(0)
Re: Bottom Painting - COSTS?????
-
AlMar
08:47:32 4/22/02
(0)
Re: Bottom Painting - COSTS????? I just did mine!!!
-
Capt.Ron
22:44:01 4/20/02
(0)
Re: Bottom Painting - COSTS?????
-
Bill
21:26:04 4/20/02
(1)
Re: Bottom Painting - COSTS?????
-
Bill
21:29:28 4/20/02
(0)
Water in Transom - Pics & More Problems?
-
Chris - Key West
18:27:25 4/20/02
(0)
Missing a tooth
-
Dean Georgatos
16:01:50 4/20/02
(3)
Re: Missing a tooth
-
Mike W
20:29:46 4/22/02
(0)
Re: Missing a tooth
-
Mark
15:22:29 4/22/02
(0)
Re: Missing a tooth
-
Bill H.
17:20:45 4/20/02
(0)
props
-
MARK
22:01:43 4/19/02
(1)
Bluefin 23
-
Mike Gildea
21:07:43 4/20/02
(0)
props
-
Mark
21:50:52 4/19/02
(0)
Synthetic oil- Chuck
-
Bdriller
10:31:58 4/19/02
(7)
To Change Boat Name (Bad Luck ?) Unless------
-
Chuck Rothert
10:58:04 4/19/02
(6)
Re: To Change Boat Name The official ceremony
-
AlMar
11:12:13 4/19/02
(5)
Re: To Change Boat Name The official ceremony
-
Capt. David Pierucci
16:54:47 4/19/02
(0)
I really like this !
-
Chuck Rothert
11:36:46 4/19/02
(3)
IT JUST CAN'T BE
-
Bootlegger
06:56:52 4/20/02
(2)
Re: IT JUST CAN'T BE
-
Sully
10:53:15 4/20/02
(1)
Re: IT JUST CAN'T BE
-
Jorge
14:02:31 4/20/02
(0)
Water In Transon - II
-
Chris - Key West
00:30:27 4/19/02
(11)
Re: Water In Transon - II
-
BP
11:55:31 4/19/02
(2)
Re: Water In Transon - II
-
Rusty
22:10:14 4/21/02
(1)
Re: Water In Transon - II
-
BP
15:13:09 4/22/02
(0)
Re: Water In Transon - II
-
Walt Collins
11:05:44 4/19/02
(2)
Re: Water In Transon - II
-
BP
11:33:27 4/19/02
(1)
Re: Water In Transon - II
-
Walt Collins
13:06:40 4/19/02
(0)
Re: Water In Transon - II
-
Rusty
08:35:25 4/19/02
(3)
Re: Water In Transon - II
-
BP
11:36:13 4/19/02
(0)
Rusty Re: Resin
-
AlMar
10:24:32 4/19/02
(1)
Re: Rusty Re: Resin
-
Rusty
21:55:34 4/21/02
(0)
Re: Water In Transon - II
-
AlMar
07:57:09 4/19/02
(0)
props
-
Mark
23:44:33 4/17/02
(1)
Re: props
-
Brett Peck
10:50:44 4/18/02
(0)
props
-
Mark
23:42:47 4/17/02
(0)
Seafoam
-
Russ
22:30:38 4/17/02
(0)
More rudder stuff
-
Bob G
17:50:34 4/17/02
(2)
Re: More rudder stuff
-
Mike W.
13:51:18 4/18/02
(1)
Re: More rudder stuff
-
Chuck Rothert
16:42:02 4/18/02
(0)
Bret peck: This is a thank you!
-
Dean Georgatos
20:39:24 4/16/02
(0)
Rudder Swing - B. Peck, M. Gildea, Anyone?
-
Brian
18:38:16 4/16/02
(6)
Re: Rudder Swing - B. Peck, M. Gildea, Anyone?
-
Mike W.
18:04:10 4/17/02
(0)
Re: Rudder Swing - B. Peck, M. Gildea, Anyone?
-
Mike W.
17:37:24 4/17/02
(0)
Re: Rudder Swing - B. Peck, M. Gildea, Anyone?
-
Mike Gildea
23:07:15 4/16/02
(0)
Re: Rudder Swing - B. Peck, M. Gildea, Anyone?
-
Brett Peck
19:03:33 4/16/02
(0)
Re: Rudder Swing - B. Peck, M. Gildea, Anyone?
-
TIM D
18:46:19 4/16/02
(1)
Re: Rudder Swing - B. Peck, M. Gildea, Anyone?
-
Brian
12:16:24 4/17/02
(0)
dual station steering-23FB
-
AlMar
07:23:46 4/16/02
(8)
dual station steering
-
Mike Gildea
23:26:31 4/16/02
(3)
Re: dual station steering
-
Tim D
22:36:25 4/17/02
(2)
dual station steering
-
Mike Gildea
21:17:01 4/20/02
(1)
Re: dual station steering
-
Capt. bob
08:31:09 4/23/02
(0)
Re: dual station steering-23FB
-
Brian
17:58:47 4/16/02
(0)
Re: dual station steering-23FB
-
Andy B.
12:05:01 4/16/02
(2)
Re: dual station steering-23FB(Andy)
-
AlMar
12:32:17 4/16/02
(1)
Re: dual station steering-23FB(Andy)
-
Andy B.
14:59:16 4/18/02
(0)
tide software for your pda
-
Bill R. (aka U.S. Blues)
02:40:19 4/16/02
(0)
1978 EXPLORER MUFFLERS
-
paragod
00:53:04 4/16/02
(2)
Inboard Mufflers
-
Mike Gildea
21:54:45 4/17/02
(1)
Re: Inboard Mufflers
-
paragod
00:01:45 4/18/02
(0)
1957 Penn Yan
-
Phillip
00:40:45 4/16/02
(0)
1976 20.5ft Penn Yan
-
Ken Blad
20:59:31 4/15/02
(1)
Re: 1976 20.5ft Penn Yan
-
Jorge
23:15:53 4/15/02
(0)
Steering Cable
-
Tim D
19:32:46 4/15/02
(1)
Re: Steering Cable
-
Brian
18:05:55 4/16/02
(0)
To Bret Peck from Dean
-
Dean Georgatos
18:36:43 4/15/02
(4)
Re: To Bret Peck from Dean
-
Brett Peck
13:15:07 4/16/02
(1)
Even I can Understand This One
-
Chuck Rothert
15:07:02 4/16/02
(0)
WOT= WIDE OPEN THROTTLE
-
wot?
21:56:24 4/15/02
(1)
Re: WOT= WIDE OPEN THROTTLE
-
Bdriller
08:02:45 4/16/02
(0)
changing to hydraulic steering
-
Tim D
05:58:22 4/14/02
(3)
Re: changing to hydraulic steering
-
Andy B.
12:05:24 4/14/02
(2)
Re: changing to hydraulic steering
-
Pete Cooper
20:33:47 4/15/02
(1)
Re: changing to hydraulic steering
-
Andy B.
12:15:10 4/16/02
(0)
More Balls on a 23ft. FB with a 318
-
Dean Georgatos
03:21:32 4/14/02
(7)
Re: More Balls on a 23ft. FB with a 318
-
Capt. Ron
07:36:58 4/16/02
(0)
Re: More Balls on a 23ft. FB with a 318
-
John
12:55:41 4/15/02
(1)
Re: More Balls on a 23ft. FB with a 318
-
Brett Peck
17:01:27 4/15/02
(0)
Re: More Balls on a 23ft. FB with a 318
-
Brett Peck
11:17:44 4/15/02
(0)
Re: More Balls on a 23ft. FB with a 318
-
Bill H
13:32:55 4/14/02
(2)
prop survey
-
bh
18:14:26 4/14/02
(1)
Re: prop survey
-
Capt. Bob
20:06:11 4/16/02
(0)
water pump
-
Tim D
20:49:28 4/13/02
(0)
Propshaft puller
-
Rusty
11:26:54 4/13/02
(3)
Re: Propshaft puller
-
Brett Peck
17:04:02 4/15/02
(0)
Re: Propshaft puller
-
Capt. David Pierucci
08:06:05 4/15/02
(1)
Re: Propshaft puller
-
rusty
22:45:20 4/15/02
(0)
OJ 3 blade/4 blade
-
Seafoam
11:24:32 4/13/02
(6)
Re: OJ 3 blade/4 blade
-
Chuck Rothert
07:54:52 4/15/02
(2)
Re: OJ 3 blade/4 blade
-
Lawdog
11:05:55 4/15/02
(1)
Re: OJ 3 blade/4 blade
-
Chuck Rothert
11:44:39 4/15/02
(0)
Re: OJ 3 blade/4 blade
-
Wayne
00:00:20 4/14/02
(2)
Re: OJ 3 blade/4 blade
-
Seafoam
11:16:31 4/14/02
(1)
Re: OJ 3 blade/4 blade
-
Brett Peck
11:33:07 4/15/02
(0)
Looking for a 26' PY FB
-
Brent Carson
05:31:24 4/13/02
(1)
Re: Looking for a 26' PY FB
-
mark r daniel
21:20:25 4/29/02
(0)
Leak by rudder shaft
-
Tim D
00:54:21 4/13/02
(2)
Re: Leak by rudder shaft
-
Chuck Rothert
09:05:41 4/15/02
(0)
Re: Leak by rudder shaft
-
Bill H.
15:48:27 4/13/02
(0)
Leak by rudder shaft
-
Tim D
00:53:32 4/13/02
(0)
OIL - Synthetic or Petro Base?
-
D.Palm
23:42:16 4/12/02
(8)
Re: OIL - Synthetic or Petro Base?
-
D.Palm
23:30:51 4/21/02
(0)
Synthetic tested
-
Mike Gildea
22:22:08 4/17/02
(2)
Re: Synthetic tested
-
Brett Peck
13:34:36 4/18/02
(1)
doubing Thomas
-
Mike Gildea
21:29:18 4/20/02
(0)
Re: OIL - Synthetic or Petro Base?
-
Brett Peck
11:38:01 4/15/02
(0)
Re: OIL - Synthetic or Petro Base?
-
Chuck Rothert
10:41:00 4/13/02
(2)
Re: OIL - Just the Facts
-
Bdriller
08:52:55 4/19/02
(1)
Re: OIL - Just the Facts
-
Chuck Rothert
09:22:23 4/19/02
(0)
change to outboard
-
steve
21:19:20 4/12/02
(2)
Missing an important componet
-
Mike Gildea
22:39:10 4/17/02
(0)
Re: change to outboard
-
D.Palm
23:13:25 4/12/02
(0)
fuel pump
-
kell
20:01:06 4/11/02
(7)
Re: fuel pump
-
Brad Deck
07:27:24 4/12/02
(0)
Re: fuel pump
-
Bill H.
20:37:04 4/11/02
(5)
Re: fuel pump
-
Jorge
08:54:14 4/12/02
(4)
Re: fuel pump
-
Mark
17:16:30 4/12/02
(2)
Re: fuel pump I had experience with elex fuel pumps on a sail boat, BW sells pump made by Waldboro. I got 5 years out of first pump. Installed another BW only to have it leak like a sprinkler internally. The replacement also BW worked for 10 years so far. SO I wanted to install a BW on my py23. Boy what a mess. BW claims pump now for diesel only. But word on street is that the pump will work for gas but BW will not gurantee it. Within 3 weeks I was sick opf looking at Marine BW electric pumps. I had the 3rd replacement in my hand readt to ripout and install. I decided then and there to go back to manual pump.
-
Bowen
17:27:31 4/13/02
(1)
AHHHHH!!
-
Andy B.
12:12:29 4/14/02
(0)
Re: fuel pump
-
Bill
13:27:03 4/12/02
(0)
1979 20.5 Explorer: Yes or No?-
-
Bob S
15:10:29 4/11/02
(3)
No
-
Mike Gildea
19:23:25 4/11/02
(2)
Re: No
-
Bob S
10:52:29 4/12/02
(0)
Re: Mike says NO
-
Capt.Ron
00:26:09 4/12/02
(0)
Spring
-
Steve Dygert
07:32:57 4/10/02
(9)
Re: Spring
-
Sully
14:58:59 4/10/02
(8)
Re: Spring
-
S.D.
21:35:34 4/10/02
(7)
Re: Spring
-
Sully
08:04:15 4/11/02
(6)
Re: Spring
-
Bootlegger
06:55:27 4/12/02
(0)
Re: Spring
-
Chuck Rothert
12:34:50 4/11/02
(1)
Re: Spring
-
Bill R. (aka U.S. Blues)
19:09:12 4/12/02
(0)
Re: Spring
-
AlMar
10:40:11 4/11/02
(2)
Re: Spring
-
AlMar
10:42:53 4/11/02
(1)
Re: Spring
-
Rusty
20:10:59 4/11/02
(0)
Hull ID #
-
Bdriller
15:25:31 4/09/02
(2)
Re: Hull ID #
-
Sully
17:52:03 4/09/02
(1)
Re: Hull ID #
-
almar
07:45:07 4/10/02
(0)
Carbon Monoxide Detector
-
Mike H.
15:14:45 4/09/02
(0)
Purchased 1975 26'
-
Valhalla Miami Fl.
14:58:39 4/09/02
(1)
Re: Purchased 1975 26'
-
AlMar
15:17:58 4/09/02
(0)
20.5 Penn Yan for Sale
-
Cy Taylor
08:43:53 4/09/02
(6)
Re: 20.5 Penn Yan for Sale
-
Ron
23:11:21 6/24/02
(0)
Re: 20.5 Penn Yan for Sale
-
cy taylor
20:59:33 4/10/02
(1)
Re: 20.5 Penn Yan for Sale
-
Jorge
23:18:14 4/10/02
(0)
Re: 20.5 Penn Yan for Sale
-
carova beach
08:26:33 4/10/02
(2)
Re: 20.5 Penn Yan for Sale
-
c
20:52:49 4/10/02
(0)
Re: 20.5 Penn Yan for Sale
-
c
20:52:07 4/10/02
(0)
Remove and replace?
-
Burney
20:10:53 4/08/02
(4)
Re: Remove and replace?
-
Burney
23:07:09 4/11/02
(0)
Re: Remove and replace?
-
Rusty
19:51:39 4/11/02
(0)
Re: Remove and replace?
-
budd
09:03:26 4/11/02
(0)
Re: Remove and replace?
-
Mike Gildea
00:47:25 4/09/02
(0)
Looking for a 26'?
-
Jorge
23:53:16 4/07/02
(2)
Re: Looking for a 26'?
-
Mark
11:08:19 4/08/02
(0)
Re: Looking for a 26'?
-
Jorge
23:55:40 4/07/02
(0)
Free Boat
-
Jay Berkowitz
21:44:22 4/07/02
(3)
OMC
-
Mark
11:12:58 4/08/02
(0)
Re: Free Boat
-
Seafoam
06:50:14 4/08/02
(1)
Re: Free Boat
-
Ed Mitchell
22:54:36 4/08/02
(0)
Prop Shaft Bushing
-
Ken R . AZ
19:08:19 4/05/02
(3)
Alignment is CRITICAL
-
Seafoam
06:46:16 4/06/02
(2)
Re: Alignment is CRITICAL
-
Ken R
19:14:00 4/06/02
(1)
Re: Alignment is CRITICAL
-
D.Palm
22:37:59 4/12/02
(0)
Water In Transom
-
Chris - Key West
13:45:41 4/05/02
(6)
Re: Water In Transom
-
Brett Peck
12:49:57 4/08/02
(2)
Artist House
-
Chris - Key West
15:23:20 4/13/02
(1)
Inside or out?
-
Brett Peck
11:45:07 4/15/02
(0)
Re: Water In Transom
-
Alan Miller
08:08:04 4/06/02
(1)
Re: Water In Transom
-
Mark
11:18:00 4/08/02
(0)
Re: Water In Transom
-
Seafoam
06:51:50 4/06/02
(0)
84 25' Penn Yan
-
Matt
14:14:28 4/04/02
(2)
Re: 84 25' Penn Yan
-
Seafoam
17:35:43 4/04/02
(0)
Re: 84 25' Penn Yan
-
Sully
16:36:17 4/04/02
(0)
1974 23' Pennyan 4 sale
-
mike in st. pete,fl
21:39:52 4/03/02
(1)
Re: 1974 23' Pennyan 4 sale
-
Paragod
23:36:10 4/05/02
(0)
Rudder angle
-
Almar
08:14:15 4/03/02
(6)
Re: Rudder angle
-
D.Palm
00:06:18 4/13/02
(0)
Re: Rudder angle
-
Brian
12:33:18 4/03/02
(1)
Re: Rudder angle
-
AlMar
13:23:12 4/03/02
(0)
Go Port Young Man, Go Port
-
Seafoam
08:47:19 4/03/02
(2)
Re: Go Port Young Man, Go Port
-
Mark
14:37:20 4/03/02
(1)
Mark
-
almar
14:48:53 4/03/02
(0)
Pics
-
Bdriller
11:22:31 4/02/02
(10)
Re: Pics
-
Bob G
17:51:57 4/02/02
(2)
Brochure
-
Seafoam
05:55:29 4/03/02
(1)
Re: Brochure
-
Bob G
17:33:07 4/03/02
(0)
Re: Pics
-
Seafoam
13:35:31 4/02/02
(6)
Re:seafoam
-
almar
15:29:46 4/02/02
(3)
Re:Yunnel
-
Bdriller
07:46:52 4/03/02
(1)
Across the Big Ditch
-
Seafoam
08:44:32 4/03/02
(0)
Re:seafoam
-
Chuck Rothert
17:14:34 4/02/02
(0)
Re: forward compartment
-
Bdriller
14:37:03 4/02/02
(1)
hull ID
-
Seafoam
15:10:12 4/02/02
(0)
FED & OJ PROPS
-
Mike W.
20:15:43 4/01/02
(0)
Looking for a captains chair for 1982 Penn yan 26'
-
David Moodie
19:10:41 4/01/02
(0)
Help, I'm Zinc-ing!
-
Almar
13:45:14 4/01/02
(7)
Re: Help, I'm Zinc-ing!
-
Brian
12:19:00 4/03/02
(1)
Re: Help, I'm Zinc-ing!
-
Mark
14:38:39 4/03/02
(0)
Re: Help, I'm Zinc-ing!
-
Rob
09:10:42 4/03/02
(0)
So, Zinc Already!
-
Seafoam
06:41:33 4/02/02
(0)
No Got Zink'n
-
Chuck Rothert
19:30:20 4/01/02
(0)
Re: Help, I'm Zinc-ing!
-
Tim D
14:56:17 4/01/02
(1)
Re: Help, I'm Zinc-ing!
-
AlMar
08:08:45 4/02/02
(0)
Help, I'm Zinc-ing!
-
Almar
13:44:47 4/01/02
(1)
Re: Help, I'm Zinc-ing!
-
AlMar
13:46:35 4/01/02
(0)
Thru Hull Transducers
-
Lawdog
21:21:26 3/31/02
(2)
Re: Thru Hull Transducers
-
Steve T.
12:01:01 4/01/02
(0)
Re: Thru Hull Transducers
-
Bill H.
10:56:29 4/01/02
(0)
Wanted: OJ 13x12 RH 1" shaft.
-
Jim Endress
12:56:50 3/31/02
(1)
Re: Wanted: OJ 13x12 RH 1" shaft.
-
Sandy the Limey
12:13:02 4/05/02
(0)
HAPPY HOLIDAYS TO ALL!
-
mike shamroy
09:48:19 3/31/02
(0)
Prop installation
-
Wayne
20:46:34 3/30/02
(0)
1st Question: Galley Cushions
-
Chris - Key West
19:28:19 3/30/02
(0)
WEBSITE APPRECIATION FUND SIGN - IN
-
mike shamroy
08:09:54 3/30/02
(0)
Thanks Seafoam
-
Bdriller
16:08:03 3/29/02
(1)
Your Welcome
-
Seafoam
22:20:17 3/29/02
(0)
1979 PY TW 318 which prop
-
James Endress
13:19:19 3/29/02
(5)
Re: 1979 PY TW 318 which prop
-
Sandy the Limey
12:01:06 4/05/02
(0)
TW 318 which prop
-
Mike Gildea
21:55:36 3/30/02
(2)
Re: TW 318 which prop
-
Jim Endress
12:50:29 3/31/02
(1)
Re: TW 318 which prop
-
Wayne
22:20:10 3/31/02
(0)
Re: 1979 PY TW 318 which prop
-
Almar
15:08:16 3/29/02
(0)
Website Appreciation Fund-Sign In
-
Seafoam
10:26:12 3/29/02
(11)
Re: Website Appreciation Fund-Sign In
-
Mike W.
17:56:21 4/12/02
(0)
Re: Website Appreciation Fund-Sign In
-
Bill Bullock
06:43:52 4/03/02
(0)
Re: Website Appreciation Fund-Sign In
-
Fred Schanz
11:18:44 4/02/02
(0)
Re: Website Appreciation Fund-Sign In
-
Russ
10:12:08 4/01/02
(0)
Re: Website Appreciation Fund-Sign In
-
Tim D
21:51:56 3/30/02
(0)
Re: Website Appreciation Fund-Sign In
-
Rusty
21:10:38 3/29/02
(1)
MTS Communications-Trenton
-
Seafoam
07:10:08 3/30/02
(0)
Don't: I'd give it to Tammy Fay Bakker!
-
Jim Cancil
11:47:08 3/29/02
(1)
Don't listen to Jim-He's Not Well!
-
Seafoam
22:31:05 3/29/02
(0)
Re: Website Appreciation Fund-Sign In
-
Robert Sullivan
10:33:39 3/29/02
(1)
Re: Website Appreciation Fund-Sign In
-
Chuck Rothert
12:04:24 3/29/02
(0)
Easter
-
Robert Sullivan (Sully)
09:40:49 3/29/02
(0)
Deck Drains
-
Tim D
00:08:35 3/29/02
(3)
Re: Deck Drains
-
gmeseroll
07:43:17 3/30/02
(0)
Re: Deck Drains
-
Chuck Rothert
14:25:50 3/29/02
(0)
Re: Deck Drains
-
Brian
13:35:23 3/29/02
(0)
23' PY sportfisher FB repair
-
Kevin
21:06:35 3/28/02
(1)
sportfisher FB repair
-
Mike Gildea
22:07:54 3/30/02
(0)
82 Penn Yan - BOUGHT IT!!!!
-
Chris - Key West, Fl
19:45:25 3/28/02
(3)
Re: 82 Penn Yan - BOUGHT IT!!!!
-
Robert Sullivan (Sully)
09:45:17 3/29/02
(0)
Re: 82 Penn Yan - BOUGHT IT!!!!
-
mike shamroy
05:44:19 3/29/02
(0)
YEEEEHAAAAA!!!!
-
Seafoam
21:23:47 3/28/02
(0)
twin screw, flybridge, AC, fishwells, 26' for sale
-
Louis Green
13:34:26 3/28/02
(2)
Re: twin screw, flybridge, AC, fishwells, 26' for sale
-
Capt. David Pierucci
16:50:35 3/28/02
(0)
Re: twin screw, flybridge, AC, fishwells, 26' for sale
-
Seafoam
15:03:18 3/28/02
(0)
2 Penn Yan's FOR SALE
-
Seafoam
11:03:33 3/28/02
(0)
Website-GREAT NEWS!
-
Seafoam
22:05:05 3/27/02
(8)
Re: Website-GREAT NEWS!
-
Steve T.
13:13:07 3/28/02
(0)
Re: Website-GREAT NEWS!
-
Steve T.
13:10:30 3/28/02
(0)
Re: Website-GREAT NEWS!
-
Stoni
09:38:59 3/28/02
(0)
Re: Website-GREAT NEWS!
-
Chuck Rothert
08:52:13 3/28/02
(0)
Re: Website-GREAT NEWS!
-
Mike Wood
06:53:40 3/28/02
(0)
Tell us where to send it!!
-
Bootlegger
06:32:29 3/28/02
(0)
Re: Website-GREAT NEWS!
-
Bill R.
00:24:07 3/28/02
(1)
Re: Website-GREAT NEWS!
-
Almar
06:36:20 3/28/02
(0)
I too will contribute to the site fund
-
Ed Mitchell
21:08:54 3/27/02
(0)
Investigators
-
Robert Sullivan
17:12:49 3/27/02
(2)
Re: Investigators
-
Almar
09:11:57 3/28/02
(1)
Re: Investigators
-
Robert Sullivan
09:58:05 3/28/02
(0)
Just purchased 1979 pennyan
-
Bdriller
16:28:02 3/27/02
(3)
Re: Just purchased 1979 pennyan
-
Seafoam
17:07:42 3/27/02
(2)
Re: Trim Tabs?
-
Bdriller
14:41:10 3/28/02
(1)
Re: Trim Tabs?
-
Seafoam
18:39:02 3/28/02
(0)
website update
-
Seafoam
13:54:21 3/27/02
(2)
Re: website update
-
Jorge
14:44:12 3/27/02
(1)
Re: website update
-
Bdriller
16:50:52 3/27/02
(0)
Shaft
-
shaft alignment tool
13:35:21 3/27/02
(2)
Re: Shaft
-
Chuck Rothert
19:51:09 3/27/02
(0)
Re: Shaft
-
Chuck Rothert
19:21:53 3/27/02
(0)
26' Penn Yan Tunnel Drive, 255 cu, Mercruiser
-
kent
13:34:08 3/27/02
(2)
26' Penn Yan Tunnel Drive, 255 cu, Mercruiser
-
Mike Gildea
21:21:48 3/27/02
(1)
Re: 26' Penn Yan Tunnel Drive, 255 cu, Mercruiser
-
Kent
19:11:07 3/30/02
(0)
Refridgeration and website support.
-
Mike Holden
13:10:08 3/27/02
(2)
Re: Refridgeration and website support.
-
Seafoam
13:26:50 3/27/02
(1)
Re: Refridgeration and website support.
-
Mike
15:05:26 3/27/02
(0)
The cost of hosting this site ??
-
Chuck Rothert
13:07:41 3/27/02
(2)
Re: The cost of hosting this site ??
-
Seafoam
13:17:05 3/27/02
(1)
Re: The cost of hosting this site ??
-
Chuck Rothert
19:00:27 3/27/02
(0)
Seafoam,Here is how it can work!!
-
Capt. Ron Pagliaro
08:50:02 3/27/02
(0)
GLAD WE'RE BACK!!!!!
-
mike shamroy
06:03:46 3/27/02
(0)
money
-
Down Time
23:03:04 3/26/02
(3)
Re: money
-
Jorge
13:36:40 3/27/02
(0)
Re: money
-
Capt. Ron Pagliaro
23:48:22 3/26/02
(1)
Re: money
-
Wayne
09:01:09 3/27/02
(0)
Glad we're back up
-
Down Time
22:57:05 3/26/02
(0)
Missed you guys!!!!!
-
Tim D
18:39:35 3/26/02
(0)
WELCOME BACK EVERYONE
-
Seafoam
16:40:39 3/26/02
(13)
Re: WELCOME BACK EVERYONE
-
Stoni
13:39:50 3/27/02
(0)
Re:
-
Bill R.
10:25:37 3/27/02
(0)
Re: WELCOME BACK EVERYONE
-
AlMar
09:44:59 3/27/02
(0)
Re: WELCOME BACK EVERYONE
-
Bootlegger
07:20:46 3/27/02
(1)
Re: WELCOME BACK EVERYONE
-
Robert Sullivan
07:33:02 3/27/02
(0)
Re: WELCOME BACK EVERYONE
-
Capt. Ron Pagliaro
23:43:20 3/26/02
(0)
First & Second Thoughts
-
Seafoam
23:19:15 3/26/02
(0)
Re: WELCOME BACK EVERYONE
-
zeke
20:05:17 3/26/02
(0)
Re: WELCOME BACK EVERYONE
-
Tim D
18:46:43 3/26/02
(1)
Re: WELCOME BACK EVERYONE
-
Slow Poke
22:00:13 3/26/02
(0)
Re: WELCOME BACK EVERYONE
-
Capt. David Pierucci
18:44:38 3/26/02
(2)
Re: WELCOME BACK EVERYONE
-
Jorge
13:31:07 3/27/02
(0)
Re: WELCOME BACK EVERYONE
-
Fred Schanz
11:04:32 3/27/02
(0)
PIECE OF CAKE!!!!
-
Seafoam
16:23:47 3/26/02
(4)
Re: PIECE OF CAKE!!!!
-
Bootlegger
07:16:32 3/27/02
(0)
Re: PIECE OF CAKE!!!!
-
Jorge
18:16:17 3/26/02
(0)
WE'RE BORN AGAIN !!
-
Chuck Rothert
16:48:56 3/26/02
(0)
Re: PIECE OF CAKE!!!!
-
Chuck Rothert
16:39:38 3/26/02
(0)
any one looking for parts
-
gmeseroll
07:20:04 3/21/02
(0)
Kicker Motor
-
Steve T.
11:27:57 3/20/02
(4)
Re: Kicker Motor
-
Jorge
23:29:44 3/20/02
(0)
Kicker Motor
-
Mike Gildea
22:22:49 3/20/02
(0)
Re: Kicker Motor
-
AlMar
12:15:36 3/20/02
(1)
Re: Kicker Motor
-
wavewalker
09:34:18 3/27/02
(0)
can anyone ID an engine plate......
-
mike shamroy
02:36:40 3/20/02
(0)
Can anyone ID an engine plate LM318BXRX-036
-
Dean Georgatos
20:13:19 3/19/02
(0)
Penn Yan Cartopper
-
Ron Getter
12:32:39 3/19/02
(0)
repower 72 montego Tunnel Drive
-
David Mastroserio
18:56:59 3/18/02
(2)
Re: repower 72 montego Tunnel Drive
-
Wayne
21:09:29 3/18/02
(0)
I will need to be HUMBLE AGAIN after this one!!
-
Chuck Rothert
20:10:22 3/18/02
(0)
What is it?
-
Kip
12:53:42 3/18/02
(2)
Re: What is it? Old Woody----
-
Chuck Rothert
13:59:28 3/18/02
(1)
Re: What is it? Old Woody----
-
Kip
19:26:55 3/18/02
(0)
Transom Mount Transducer
-
Steve T.
12:12:43 3/18/02
(4)
Re: Transom Mount Transducer
-
jim k.
07:52:39 3/27/02
(0)
mount it on the inside of the hull
-
Mark
13:31:20 3/19/02
(0)
Re: Transom Mount Transducer
-
Wayne
20:50:44 3/18/02
(0)
Re: Transom Mount Transducer
-
Shellback
12:21:56 3/18/02
(0)
auto 360 to marine
-
Joe
06:29:18 3/18/02
(9)
Re: auto 360 to marine
-
Mark
13:43:34 3/19/02
(0)
Re: auto 360 to marine
-
rusty
21:42:17 3/18/02
(1)
Re: auto 360 to marine
-
Joe
22:41:43 3/18/02
(0)
Re: auto 360 to marine
-
AlMar
07:38:22 3/18/02
(5)
Yea, BUT
-
Joe
13:13:32 3/18/02
(4)
Re: Yea, BUT
-
L.C.
08:56:13 3/20/02
(3)
I like my Chrysler
-
Seafoam
11:05:53 3/20/02
(2)
Re: I like my Chrysler ME TOO!
-
Chuck Rothert
13:35:34 3/20/02
(1)
Re: I like my Chrysler ME TOO!
-
rusty
21:32:50 3/20/02
(0)
360 auto to marine
-
Joe
06:25:37 3/18/02
(0)
Bottom Paint
-
ian
21:14:11 3/17/02
(4)
Re: Bottom Paint
-
AlMar
07:34:35 3/18/02
(3)
Re: Bottom Paint
-
ian
21:13:40 3/18/02
(2)
Re: Bottom Paint
-
almar
06:53:10 3/19/02
(1)
Re: Bottom Paint
-
ian
15:13:27 3/20/02
(0)
Bad Prop is GOOD NEWS!
-
Seafoam
10:08:04 3/17/02
(2)
Re: Bad Prop is GOOD NEWS!
-
Bill R.
11:49:31 3/18/02
(0)
Re: Bad Prop is GOOD NEWS!
-
Chuck Rothert
10:51:11 3/18/02
(0)
Diving in Texas
-
Paragod
00:43:56 3/17/02
(1)
Re: Diving in Texas
-
Bill
08:54:04 3/17/02
(0)
Diving in Texas
-
Paragod
00:43:50 3/17/02
(0)
Need repair man for 23' 1976 Penn with a 318
-
Dean
19:31:55 3/16/02
(0)
Key Areas When Purchasing a PY?
-
Todd M
17:21:58 3/15/02
(1)
Re: Key Areas When Purchasing a PY?
-
Bootlegger
17:59:23 3/15/02
(0)
Penn Yan in Tx
-
Paragod
23:20:17 3/14/02
(3)
Re: Penn Yan in Tx
-
Bill
19:28:03 3/16/02
(1)
Re: Penn Yan in Tx
-
Rich
23:08:37 3/19/02
(0)
Re: Penn Yan in Tx
-
Rich
09:00:40 3/15/02
(0)
1977 Sportfisher?
-
paragod
07:59:16 3/14/02
(1)
1977 Montego "Pop Up Dash"
-
Seafoam
21:03:54 3/14/02
(0)
PENN YAN BROCHURES
-
mike shamroy
07:47:51 3/14/02
(1)
Re: PENN YAN BROCHURES
-
Rusty
08:59:58 3/16/02
(0)
electrolysis damage?
-
dpalm
02:32:39 3/14/02
(1)
Re: electrolysis damage?
-
rusty
09:33:12 3/15/02
(0)
1973-20' PENN-YAN for Sale
-
Ray Dorell
17:31:09 3/13/02
(2)
HIN #
-
Mike Gildea
22:27:24 3/14/02
(1)
Re: HIN #
-
Ray Dorell
22:43:55 3/14/02
(0)
gas tanks
-
gene
17:24:45 3/13/02
(6)
Re: gas tanks
-
carova beach
07:20:10 3/15/02
(3)
Re: gas tanks
-
Jorge
21:05:28 3/18/02
(2)
Re: gas tanks does it fit in a 75 py
-
spyro
00:11:22 4/15/02
(0)
Re: gas tanks
-
wavewalker
10:03:17 3/27/02
(0)
Re: gas tanks
-
bill bullock
23:48:57 3/14/02
(0)
Re: gas tanks
-
Bill H.
07:30:30 3/14/02
(0)
PENN YAN BROCHURES
-
mike shamroy
16:08:54 3/13/02
(1)
Re: PENN YAN BROCHURES
-
AlMar
06:55:21 3/14/02
(0)
Raw water sys VS Heat exchanger sys
-
Ken R
19:25:21 3/12/02
(9)
Re: Raw water sys VS Heat exchanger sys
-
Sandy the Limey
12:35:22 4/05/02
(0)
Re: Raw water sys VS Heat exchanger sys
-
Rusty
10:50:03 3/15/02
(2)
Re: Raw water sys VS Heat exchanger sys
-
Ken R
21:08:19 3/17/02
(1)
Re: Raw water sys VS Heat exchanger sys
-
rusty
22:23:15 3/19/02
(0)
Re: Raw water sys VS Heat exchanger sys
-
Ken R
19:55:44 3/14/02
(1)
Temperature difference
-
Mike Gildea
23:36:11 3/14/02
(0)
Re: Raw water sys VS Heat exchanger sys
-
AlMar
06:59:29 3/14/02
(0)
Re: Raw water sys VS Heat exchanger sys
-
D.Palm
02:45:59 3/14/02
(0)
uneven cooling
-
Mike Gildea
21:16:28 3/12/02
(0)
Risers manifolds Steering Cables
-
Tim D
19:25:07 3/11/02
(7)
Re: Risers manifolds Steering Cables
-
RM
09:51:57 3/31/02
(0)
Re: Risers manifolds Steering Cables
-
Rich
09:08:13 3/15/02
(0)
Steering Cables
-
Brian
12:21:01 3/13/02
(0)
Re: Risers manifolds Steering Cables
-
rusty
20:22:31 3/12/02
(0)
Re: Risers manifolds Steering Cables
-
Ed Mitchell
20:08:50 3/12/02
(1)
Re: Risers manifolds Steering Cables(Ed)
-
AlMar
12:12:38 3/13/02
(0)
Re: Risers manifolds Steering Cables
-
Mark
10:31:44 3/12/02
(0)
Mike Gildea - Need Stats
-
Brian
12:55:21 3/11/02
(4)
Stats
-
Mike Gildea
21:44:26 3/12/02
(3)
Re: Stats
-
Brett Peck
11:23:28 3/14/02
(2)
Brett Peck - Your Opinion?
-
Brian
13:10:51 3/14/02
(1)
Re: Brett Peck - Your Opinion?
-
Brett Peck
11:10:03 3/15/02
(0)
MUG SHOT & OJ prop
-
Chuck Rothert
11:34:30 3/11/02
(1)
Re: MUG SHOT & OJ prop
-
Seafoam
17:32:21 3/13/02
(0)
Why replace an Alpha with a Bravo? What are the differences and different parts needed?
-
Mike Ellis
21:56:24 3/10/02
(3)
Re: Why replace an Alpha with a Bravo? What are the differences and different parts needed?
-
jobowker
09:54:11 3/15/02
(0)
Re: Why replace an Alpha with a Bravo? What are the differences and different parts needed?
-
Shellback
04:56:30 3/11/02
(1)
Alpha vs Bravo - All you ever needed to know
-
Mike Ellis
21:42:14 3/11/02
(0)
Is a 355 CI Engine a Marine Engine? Is it Safe?
-
Mike E.
19:09:35 3/10/02
(9)
355 CI Engine
-
Mike Gildea
20:03:18 3/10/02
(8)
P.S. Just noticed your name on the above posting...
-
Mike Gildea
22:41:48 3/12/02
(0)
Re: 355 CI Engine
-
Mike Ellis
21:38:20 3/10/02
(6)
Re: 355 CI Engine
-
jobowker
10:12:26 3/15/02
(0)
WHOA! BACK UP HERE..
-
Mike Gildea
22:17:42 3/12/02
(4)
Re: WHOA! BACK UP HERE..
-
Mike Ellis
22:44:48 3/13/02
(3)
Re: WHOA! BACK UP HERE..
-
Bootlegger
06:35:45 3/14/02
(2)
OOPS
-
Mike Ellis
21:00:42 3/14/02
(1)
Didn`t see the sterndrive question above until afterwards
-
Mike Gildea
21:38:53 3/15/02
(0)
75 penn yan tunnel drive 4 sale
-
gary
18:11:29 3/10/02
(4)
Re: 75 penn yan tunnel drive 4 sale
-
Capt.Ron
18:26:24 3/10/02
(3)
Re: 75 penn yan tunnel drive 4 sale
-
gary
19:15:10 3/10/02
(2)
Bad HIN number
-
Mike gildea
22:28:26 3/12/02
(0)
Mike Gildea (Help)
-
Capt.Ron
20:52:59 3/10/02
(0)
propeller size
-
David Edgar
09:02:34 3/10/02
(6)
propeller size
-
Mike Gildea
20:21:06 3/10/02
(0)
Re: propeller size
-
Bill H
17:26:48 3/10/02
(4)
Re: propeller size
-
David Edgar
19:01:02 3/10/02
(3)
Re: propeller size
-
Bill
20:08:26 3/10/02
(0)
Re: propeller size
-
Mike
19:18:42 3/10/02
(1)
Re: propeller size
-
Chuck Rothert
10:52:42 3/11/02
(0)
PICTURES
-
mike shamroy
08:22:51 3/09/02
(3)
Re: PICTURES
-
rusty
07:03:37 3/12/02
(1)
Re: PICTURES
-
mike shamroy
08:58:38 3/12/02
(0)
Re: PICTURES
-
Bootlegger
11:03:52 3/09/02
(0)
For Sale:
-
Douglas Bianchi
23:21:27 3/08/02
(0)
manifolds risers
-
Frederick Danny
22:49:50 3/08/02
(2)
Re: manifolds risers
-
Mark
13:42:03 3/11/02
(0)
Re: manifolds risers
-
rusty
12:00:13 3/09/02
(0)
OJ Prop results
-
Steve T.
13:12:22 3/08/02
(6)
Re: OJ Prop results
-
Brett Peck
13:32:19 3/11/02
(0)
Re: OJ Prop results
-
Chuck Rothert
15:05:43 3/09/02
(3)
Re: OJ Prop results
-
Steve T.
12:15:07 3/11/02
(1)
Re: OJ Prop results
-
Chuck Rothert
13:09:22 3/11/02
(0)
Re: OJ Prop results
-
Steve T.
11:46:57 3/11/02
(0)
Re: OJ Prop results
-
Sully 25
14:41:20 3/08/02
(0)
Raw water pump (front of engine)
-
Chuck Rothert
08:02:29 3/08/02
(8)
Re: Raw water pump (front of engine)
-
Mark
13:39:59 3/11/02
(5)
uuh oh!
-
Chuck Rothert
18:01:26 3/11/02
(4)
Re: uuh oh!
-
Bootlegger
07:52:42 3/12/02
(3)
Re: uuh oh!
-
Mark
10:29:09 3/12/02
(1)
Re: uuh oh!
-
Chuck Rothert
12:06:53 3/12/02
(0)
Re: uuh oh!
-
Chuck Rothert
09:03:36 3/12/02
(0)
Re: Raw water pump (front of engine)
-
Steve Lawson
18:33:39 3/08/02
(0)
Re: Raw water pump (front of engine)
-
Capt. David Pierucci
14:57:11 3/08/02
(0)
Water tank
-
Chuck
14:46:34 3/07/02
(3)
Re: Water tank
-
Brian
16:56:33 3/07/02
(2)
Re: Water tank
-
Chuck
20:23:14 3/07/02
(1)
Re: Water tank
-
Mark
10:33:55 3/12/02
(0)
1929 Penn Yann 7' JR dinghy for sale
-
Robert Ahern
14:42:29 3/07/02
(0)
1981 23 Avenger Cuddy "True Blue Too" and 1991 6.2 Diesel 3/4 ton 4x4 Suburban for sale
-
Dave French
10:38:25 3/07/02
(0)
HELP ! Mercrusier
-
Chris
07:01:59 3/07/02
(1)
Re: HELP ! Mercrusier
-
Bill R.
11:23:03 3/07/02
(0)
Re: Mysterious Penn Yan (Russell)
-
gmeseroll
06:34:59 3/06/02
(0)
1978 18 foot penn yan
-
ministock
00:58:09 3/06/02
(2)
Re: 1978 18 foot penn yan
-
Shellback
05:51:01 3/06/02
(1)
Re: 1978 18 foot penn yan
-
mministock
23:28:14 3/26/02
(0)
1978 18 foot penn yan
-
ministock
00:56:45 3/06/02
(0)
PICTURES
-
mike shamroy
21:53:19 3/05/02
(1)
Re: PICTURES
-
Bootlegger
16:39:14 3/07/02
(0)
Alternator rubbing
-
Steve T.
18:46:04 3/05/02
(0)
Alternator rubbing
-
Steve T.
18:45:52 3/05/02
(0)
1976 PY Avenger FB
-
Dean
18:22:44 3/04/02
(1)
1976 PY Avenger FB weight
-
Mike Gildea
20:19:34 3/04/02
(0)
1976 PY Avenger FB
-
Dean
18:18:16 3/04/02
(0)
Chrysler ID
-
Lawdog
16:59:51 3/04/02
(1)
Re: Chrysler ID
-
Slow Poke
00:27:47 3/05/02
(0)
Finaly completed Restoration on 20' Adventurer tunnel
-
Ken R
18:00:41 3/03/02
(0)
Need Opinions 0n suitability of 318 Chrysler in 23' Avenger
-
Ed Mitchell
08:39:13 3/03/02
(9)
Re: Need Opinions 0n suitability of 318 Chrysler in 23' Avenger
-
rusty
23:11:37 3/04/02
(0)
Re:Gee Mike!
-
Almar
10:34:39 3/04/02
(1)
Let`s try another tack
-
Mike gildea
21:25:55 3/04/02
(0)
318 Chrysler in 23' Avenger
-
Mike Gildea
21:40:28 3/03/02
(3)
Re: 318 Chrysler in 23' Avenger
-
Brett Peck
14:04:13 3/11/02
(0)
Re: 318 Chrysler in 23' Avenger
-
Ed Mitchell
20:55:53 3/04/02
(1)
23' Avenger repower.
-
Mike Gildea
21:55:10 3/04/02
(0)
Re: Need Opinions 0n suitability of 318 Chrysler in 23' Avenger
-
Bill H
09:56:13 3/03/02
(1)
Re: chev 350
-
Almar
14:43:08 3/04/02
(0)
Anyone out there running Crusader?
-
D.Palm
23:23:37 3/02/02
(0)
1972 Penn Yan Flybridge For Sale
-
mark
20:51:06 3/02/02
(0)
would like pics of '73 challenger with fly
-
D.Palm
01:50:28 3/02/02
(2)
Re: would like pics of '73 challenger with fly
-
Bill H.
11:46:11 3/02/02
(1)
Re: would like pics of '73 challenger with fly
-
D.Palm
22:21:57 3/02/02
(0)
1971 21' Penn Yan For Sale
-
Gary
14:54:11 3/01/02
(0)
Looking for a 20 - 21 foot tunnel(1982 & newer)
-
John Polandick
08:18:12 3/01/02
(1)
Re: Looking for a 20 - 21 foot tunnel(1982 & newer)
-
Thomas Sherratt
15:35:50 3/01/02
(0)
20' penn yan posted by shane
-
mike shamroy
00:17:46 3/01/02
(0)
20ft penn yan tunnel drive
-
shane w
00:04:43 3/01/02
(4)
Re: 20ft penn yan tunnel drive
-
Brian Williams
23:37:33 3/01/02
(2)
Re: 20ft penn yan tunnel drive
-
Sully 25
15:31:46 3/02/02
(0)
Re: 20ft penn yan tunnel drive
-
Sully 25
15:22:31 3/02/02
(0)
Re: 20ft penn yan tunnel drive
-
Bootlegger
06:48:35 3/01/02
(0)
20ft penn yan tunnel drive
-
shane w
00:02:26 3/01/02
(1)
Re: 20ft penn yan tunnel drive
-
Wayne
08:22:35 3/01/02
(0)
Penn Yan Swift Question
-
Ken Perkins
21:02:11 2/28/02
(1)
Re: Penn Yan Swift Question
-
Seafoam
21:06:33 2/28/02
(0)
re: raw water pump
-
mike shamroy
20:16:30 2/28/02
(0)
Confused?
-
lenny from LI
15:56:02 2/28/02
(11)
Re: Confused?
-
D.Palm
23:39:58 3/02/02
(0)
OJ
-
Seafoam
18:36:35 2/28/02
(0)
Re: Confused?
-
Brian
17:45:52 2/28/02
(1)
Re: Confused?
-
Lenny from LI
08:53:57 3/01/02
(0)
Re: Confused?
-
E. Wayne Holmes
17:43:10 2/28/02
(0)
Re: Confused?
-
Wayne
17:41:48 2/28/02
(0)
Re: Confused?
-
Bob Sullivan
16:20:28 2/28/02
(4)
Re: Confused?
-
Tim D
18:27:06 2/28/02
(3)
Re: Confused?
-
Lenny from LI
08:59:39 3/01/02
(2)
Re: Confused?
-
Brian Williams
23:58:38 3/01/02
(1)
Re: Confused?
-
TimD
00:57:22 3/02/02
(0)
Mysterious Penn Yan
-
Russell Mills
23:32:49 2/27/02
(5)
title
-
Seafoam
21:15:57 2/28/02
(0)
Re: Mysterious Penn Yan
-
Seafoam
06:05:02 2/28/02
(3)
Re: Mysterious Penn Yan
-
Russell Mills
10:42:04 2/28/02
(2)
FYI
-
Seafoam
18:32:11 2/28/02
(1)
Re: FYI
-
rusty
19:04:00 2/28/02
(0)
raw water pump
-
Brian Williams
18:57:17 2/27/02
(2)
raw water pump
-
Mike Gildea
22:58:06 2/27/02
(0)
Re: raw water pump
-
Tim D
21:11:35 2/27/02
(0)
OJ Prop
-
Steve T.
13:28:13 2/27/02
(13)
Alignment, Alignment, Alignment
-
Seafoam
06:49:43 2/28/02
(1)
Re: Alignment, Alignment, Alignment
-
D.Palm
00:12:31 3/03/02
(0)
Re: OJ Prop
-
Brett Peck
14:15:34 2/27/02
(0)
Re: OJ Prop
-
Bill
14:00:39 2/27/02
(9)
Re: OJ Prop
-
Chuck Rothert
14:24:07 2/27/02
(0)
Re: OJ Prop
-
Chuck Rothert
14:23:15 2/27/02
(0)
Re: OJ Prop
-
Steve T.
14:21:35 2/27/02
(1)
Re: OJ Prop
-
Brett Peck
19:05:38 2/27/02
(0)
Re: OJ Prop
-
Steve T.
14:20:09 2/27/02
(4)
Re: OJ Prop
-
Steve T.
14:37:09 2/28/02
(3)
Re: OJ Prop
-
Seafoam
21:21:41 2/28/02
(2)
Re: OJ Prop
-
Steve T.
12:05:37 3/01/02
(1)
Re: OJ Prop
-
Seafoam
05:43:45 3/02/02
(0)
A Question for the Motorheads
-
Lawdog
10:37:47 2/27/02
(5)
Re: A Question for the Motorheads
-
Brett Peck
14:21:32 2/27/02
(0)
Re: A Question for the Motorheads
-
Chuck Rothert
11:00:13 2/27/02
(3)
Re: A Question for the Motorheads
-
Bob Sullivan
16:07:16 2/27/02
(2)
Re: A Question for the Motorheads
-
Rusty
20:19:29 2/27/02
(1)
Re: A Question for the Motorheads
-
D.Palm
00:32:41 3/03/02
(0)
virginia weather report
-
AlMar
10:12:53 2/27/02
(9)
Re: virginia weather report
-
Slow Poke
19:34:48 2/28/02
(2)
OOPS!
-
Seafoam
21:35:43 2/28/02
(0)
That Ain't Snow!
-
Seafoam
21:33:05 2/28/02
(0)
Re: virginia weather report
-
Bootlegger
18:41:26 2/27/02
(3)
Re: virginia weather report
-
Seafoam
21:27:28 2/28/02
(0)
Re: virginia weather report
-
CHUCK ROTHERT
12:42:30 2/28/02
(1)
Hey "Chuch-A-Luck"
-
Seafoam
21:31:00 2/28/02
(0)
I HEARD THAT!
-
Seafoam
17:52:51 2/27/02
(0)
Re: virginia weather report
-
Bob Sullivan
16:13:43 2/27/02
(0)
photo reorganization
-
Brett Peck
13:15:14 2/26/02
(4)
Re: photo reorganization
-
Bob Sullivan
18:39:48 2/26/02
(0)
Re: photo reorganization
-
Seafoam
13:19:35 2/26/02
(2)
Re: photo reorganization
-
Chuck Rothert
13:37:15 2/26/02
(1)
Re: photo reorganization
-
Bootlegger
07:46:29 2/27/02
(0)
MATERIAL AROUND THE INSIDE WALLS OF BOAT
-
TIM D
04:04:31 2/26/02
(4)
Re: MATERIAL AROUND THE INSIDE WALLS OF BOAT
-
D.Palm
00:41:08 3/03/02
(0)
Re: MATERIAL AROUND THE INSIDE WALLS OF BOAT
-
stoni
10:40:17 2/26/02
(0)
Re: MATERIAL AROUND THE INSIDE WALLS OF BOAT
-
L.C.
09:45:37 2/26/02
(0)
Re: MATERIAL AROUND THE INSIDE WALLS OF BOAT
-
Seafoam
06:52:36 2/26/02
(0)
I have no CLUE 23' PY FB HELP
-
Russ Mills
22:41:30 2/25/02
(3)
Re: I have no CLUE 23' PY FB HELP
-
D.Palm
01:39:20 3/02/02
(0)
Re: I have no CLUE 23' PY FB HELP
-
Bob Sullivan
10:19:19 2/26/02
(0)
Mysterious Penn Yan
-
Seafoam
06:41:16 2/26/02
(0)
HATCHCOVERS Tim Waag Thank You !!
-
Chuck Rothert
09:30:32 2/25/02
(0)
Strut Alignment YES! Shaft NO.
-
Seafoam
07:04:38 2/25/02
(4)
Re: the travlin Seafoam
-
Almar
10:56:58 2/25/02
(1)
Re: the travlin Seafoam
-
Seafoam
16:15:52 2/25/02
(0)
Re: Strut Alignment YES! Shaft NO.
-
Chuck Rothert
07:56:10 2/25/02
(1)
Re: Strut Alignment YES! Shaft NO.
-
Seafoam
08:28:40 2/25/02
(0)
chrysler fwc systems
-
mike shamroy
05:29:29 2/25/02
(2)
chrysler fwc systems
-
Mike Gildea
22:58:25 2/25/02
(1)
Re: chrysler fwc systems
-
mike shamroy
09:23:00 2/26/02
(0)
23' flying bridge.....rusty jackson
-
mike shamroy
09:10:20 2/24/02
(2)
Re: 23' flying bridge.....rusty jackson
-
rustyJ
22:24:02 2/24/02
(0)
Chrysler FWC systems
-
Mike Gildea
17:28:10 2/24/02
(0)
shoot thru hull transducer
-
TIM D
07:59:46 2/24/02
(2)
thru hull transducer
-
Mike Gildea
17:42:29 2/24/02
(1)
Re: thru hull transducer
-
Brian Williams
18:42:20 2/24/02
(0)
prop
-
fred
23:30:29 2/23/02
(0)
1970 Tunnel Explorer for sale
-
Tom G
20:57:48 2/23/02
(3)
Re: 1970 Tunnel Explorer for sale
-
Bootlegger
07:49:42 2/25/02
(2)
One to Ride, One to Work on!
-
Seafoam
06:46:52 2/26/02
(1)
Re: One to Ride, One to Work on!
-
Bootlegger
07:33:56 2/27/02
(0)
wanted pics of inside 1982 26' PY cuddy/no fly bridge
-
David Moodie
13:27:44 2/23/02
(0)
Explorer Cuddy vrs. standard Explorer which is better?
-
Ed Mitchell
13:20:09 2/23/02
(4)
Re: Explorer Cuddy vrs. standard Explorer which is better?
-
spyro
12:53:14 2/26/02
(0)
which is better?
-
Mike Gildea
17:53:18 2/24/02
(0)
Re: Explorer Cuddy vrs. standard Explorer which is better?
-
Bill R.
22:33:37 2/23/02
(1)
Re: Explorer Cuddy vrs. standard Explorer which is better?
-
Seafoam
07:43:03 2/24/02
(0)
flax stuffing/packing "rings"
-
Andy Perry
13:07:12 2/23/02
(2)
Re: flax stuffing/packing "rings"
-
Ed Mitchell
13:27:49 2/23/02
(1)
Re: flax stuffing/packing "rings"
-
Chuck Rothert
21:52:05 2/24/02
(0)
engine identification
-
mike shamroy
10:29:42 2/23/02
(0)
23' flying bridge.....rusty jackson
-
mike shamroy
10:18:28 2/23/02
(1)
Re: 23' flying bridge.....rusty jackson
-
rusty
11:15:06 2/23/02
(0)
ENGINE IDENTIFICATION
-
J. L. Doc Howard
08:37:59 2/23/02
(1)
ENGINE IDENTIFICATION
-
Mike Gildea
18:31:47 2/24/02
(0)
Stainless Steel 3 fin vents
-
Tim D
06:57:15 2/23/02
(3)
Re: Stainless Steel 3 fin vents
-
Bill B
14:32:39 2/23/02
(1)
THANKS BILL
-
TIM DILLON
20:31:54 2/23/02
(0)
Re: Stainless Steel 3 fin vents
-
Chuck Rothert
10:39:36 2/23/02
(0)
Replacing Aluminum rails with stainless steel
-
Tim D
06:50:28 2/23/02
(0)
Replacing Aluminum rails with stainless steel
-
Tim D
06:47:41 2/23/02
(0)
Drainage holes in flybridge "74 avenger
-
Tim D
06:35:32 2/23/02
(1)
Re: Drainage holes in flybridge "74 avenger
-
Brian
09:57:27 2/25/02
(0)
Bilge Pumps 1974 avenger
-
Tim D
06:27:58 2/23/02
(1)
Re: Bilge Pumps 1974 avenger
-
Brian
09:53:11 2/25/02
(0)
Dining Area 1974 avenger
-
Tim D
06:20:33 2/23/02
(0)
Flooring cover
-
Tim D
06:13:53 2/23/02
(1)
Re: Flooring cover
-
Brian
09:49:44 2/25/02
(0)
Wiper Motor for 74 23 ft FBSF
-
TIM DILLON
06:02:40 2/23/02
(0)
Swim Platform
-
Tim D
05:53:28 2/23/02
(1)
Re: Swim Platform
-
Chuck Rothert
10:35:41 2/23/02
(0)
4 bladed props
-
Brian Williams
00:34:25 2/23/02
(2)
Re: 4 bladed props
-
Chuck Rothert
08:45:01 2/23/02
(0)
Re: 4 bladed props
-
Bootlegger
08:08:04 2/23/02
(0)
23' flying bridge--- rusty jackson
-
mike shamroy
21:39:22 2/22/02
(2)
Re: 23' flying bridge--- rusty jackson
-
rusty
10:11:46 2/23/02
(0)
Re: 23' flying bridge--- rusty jackson
-
rusty
09:33:55 2/23/02
(0)
23' flying bridge---rusty jackson
-
mike shamroy
13:44:07 2/22/02
(2)
Re: 23' flying bridge---rusty jackson
-
Rusty
16:48:24 2/22/02
(1)
Re: 23' flying bridge---rusty jackson
-
Bill H
21:29:24 2/22/02
(0)
1974 PY FOR SALE
-
mike shamroy
08:46:39 2/22/02
(0)
1974 Penn Yan 18' Motor Questions
-
Wet behind the EARS
23:35:15 2/21/02
(2)
Re: 1974 Penn Yan 18' Motor Questions
-
Chuck
08:00:58 2/22/02
(0)
Something Stupid
-
Mike gildea
00:08:47 2/22/02
(0)
What do you think?
-
Reo
15:03:55 2/21/02
(5)
Re: What do you think?
-
Shellback
20:59:28 2/22/02
(2)
Re: What do you think?
-
Bootlegger
07:58:55 2/23/02
(1)
Re: What do you think?
-
Bootlegger
08:00:48 2/23/02
(0)
Re: What do you think?
-
Brian
18:15:56 2/21/02
(0)
Re: What do you think?
-
Bob Sullivan
17:16:47 2/21/02
(0)
Fuel tanks
-
Chuck
07:22:23 2/21/02
(6)
Re: Fuel tanks
-
Bill H
19:47:55 2/21/02
(0)
Re: Fuel tanks
-
Rusty
11:44:37 2/21/02
(0)
Re: Fuel tanks
-
Brian
09:25:17 2/21/02
(3)
Question for Brian
-
TIM D.
08:10:07 2/24/02
(2)
Re: Question for Brian
-
Brian
09:41:50 2/25/02
(0)
Re: Question for Brian
-
Bootlegger
07:43:09 2/25/02
(0)
Windows, seals and tracks
-
gmeseroll
06:47:19 2/21/02
(0)
1978 26' FBSF
-
Sully
22:39:15 2/20/02
(9)
Re: 1978 26' FBSF
-
Sandy the Limey
13:01:08 4/05/02
(0)
Re: 1978 26' FBSF
-
Sully/ Bob Sullivan
10:57:32 2/21/02
(5)
Re:sully/sully
-
AlMar
12:26:10 2/21/02
(4)
Re:sully/sully
-
Bob Sullivan
17:05:58 2/21/02
(0)
Re:sully/sully
-
Bob Sullivan
17:05:25 2/21/02
(2)
Re:sully/sully
-
Sully Part Deaux
23:47:53 2/21/02
(1)
Re:sully/sully
-
Bob Sullivan
07:52:02 2/22/02
(0)
Re: 1978 26' FBSF
-
Mike Wood
04:46:01 2/21/02
(0)
Re: 1978 26' FBSF
-
Steve Lawson
01:42:16 2/21/02
(0)
1973 penn yan avenger 23 ft for sale
-
Tim D
22:10:47 2/20/02
(0)
Lifting rings
-
Wayne
21:07:02 2/20/02
(4)
Lifting rings
-
Mike gildea
00:20:03 2/22/02
(0)
Re: Lifting rings
-
AlDevernoe
13:09:39 2/21/02
(0)
Re: Lifting rings
-
Al Devernoe
13:05:30 2/21/02
(0)
Re: Lifting rings
-
Al Devernoe
13:00:00 2/21/02
(0)
23' Flying bridge
-
Rusty Jackson
21:26:40 2/19/02
(8)
Re: 23' Flying bridge
-
Mike Wood
22:18:46 2/21/02
(1)
Re: 23' Flying bridge
-
rusty
21:23:47 2/22/02
(0)
Re: 23' Flying bridge
-
Sully
09:35:01 2/20/02
(0)
Hi Neighbor!
-
Seafoam
06:40:43 2/20/02
(4)
Re: Hi Neighbor!
-
Rusty
11:48:17 2/21/02
(3)
Re: Hi Neighbor!
-
Bootlegger Don
19:06:04 2/21/02
(2)
Sea Foam
-
Bootlegger
19:08:38 2/21/02
(1)
Other Site
-
Seafoam
20:06:35 2/22/02
(0)
What size Trim Tabs?
-
Tim D
21:20:30 2/19/02
(2)
Re: What size Trim Tabs?
-
Rusty Jackson
11:37:22 2/21/02
(1)
Re: What size Trim Tabs?
-
Tim D
19:24:41 2/21/02
(0)
82 20.5 pennyan tunnel FOR SALE
-
MPIMENTAL
20:48:12 2/19/02
(2)
Re: 82 20.5 pennyan tunnel FOR SALE
-
Ed Mitchell
20:35:58 2/20/02
(0)
Re: 82 20.5 pennyan tunnel FOR SALE
-
Bill B
05:47:14 2/20/02
(0)
82 20.5 pennyan tunneldrive for sale
-
m.pimental
20:11:30 2/19/02
(1)
Re: 82 20.5 pennyan tunneldrive for sale
-
Capt. David Pierucci
05:51:43 2/20/02
(0)
30 yrs of Paint...
-
Lenny from LI
16:23:09 2/19/02
(10)
Re: 30 yrs of Paint...
-
Mike H.
09:32:50 2/20/02
(2)
Re: 30 yrs of Paint...
-
Lenny from LI
17:16:19 2/20/02
(1)
Re: 30 yrs of Paint...
-
Mike
09:36:31 2/22/02
(0)
Re: 30 yrs of Paint...
-
Brian
16:47:17 2/19/02
(6)
Re: 30 yrs of Paint...
-
Lenny from LI
17:28:04 2/20/02
(0)
Re: 30 yrs of Paint...
-
Mark
17:01:19 2/19/02
(4)
Re: 30 yrs of Paint...
-
AlMar
08:13:15 2/20/02
(3)
Re: 30 yrs of Paint...
-
bootlegger
18:10:29 2/20/02
(2)
Re: 30 yrs of Paint...
-
rusty
11:58:34 2/21/02
(1)
Re: 30 yrs of Paint...
-
Slow Poke
18:44:25 2/21/02
(0)
Wanted to Buy - Props
-
Mark
18:58:36 2/18/02
(1)
Re: Wanted to Buy - Props
-
AlMar
08:21:05 2/20/02
(0)
battery charger / monitor
-
Mike Holden
14:34:15 2/18/02
(2)
Re: battery charger / monitor
-
Pete Cooper
16:26:15 2/22/02
(1)
Re: battery charger / monitor
-
Mike
08:41:32 2/25/02
(0)
Want to Buy
-
Bruce
13:15:29 2/18/02
(1)
Re: Want to Buy
-
Brian
14:12:50 2/18/02
(0)
Firing Order Reverse Rotation Crysler318.
-
Sandy The Limey
12:23:45 2/18/02
(2)
Re: Firing Order Reverse Rotation Chrysler 318.
-
Mark
13:51:56 2/18/02
(1)
Re: Firing Order Reverse Rotation Chrysler 318.
-
Mark
13:54:25 2/18/02
(0)
FS 1977 Sportfisher 22 ft
-
Zack
12:20:44 2/18/02
(3)
SOLD!! SeafoamIII
-
Seafoam
20:58:33 2/18/02
(1)
Re: SOLD!! SeafoamIII
-
ty
00:45:30 3/14/02
(0)
Re: FS 1977 Sportfisher 22 ft
-
Zack
12:21:43 2/18/02
(0)
1975 Penn Yen 26 ft.
-
Dean S. Humphrey
09:05:24 2/18/02
(4)
Re: 1975 Penn Yen 26 ft.
-
Dean S. Humphrey
10:53:38 2/19/02
(1)
Re: Busted tailbone
-
Bootlegger
17:27:27 2/19/02
(0)
Re: 1975 Penn Yen 26 ft.
-
Mark
09:17:27 2/18/02
(1)
Re: 1975 Penn Yen 26 ft.
-
Slow Poke
23:25:16 2/18/02
(0)
new pics on the other site
-
Seafoam
21:12:45 2/17/02
(2)
Re: new pics on the other site
-
Bill R.
10:04:52 2/19/02
(0)
I'm Jealous
-
Bootlegger Ddo
21:59:57 2/18/02
(0)
GUTTED MY 1974 23 FT FB TODAY
-
Tim D
16:42:33 2/17/02
(1)
Re: GUTTED MY 1974 23 FT FB TODAY
-
Russ
21:20:56 3/31/02
(0)
GUTTED MY 1974 23 FT FB TODAY
-
Tim D
16:42:16 2/17/02
(0)
kenyon alcohol stove parts
-
john humphrys
13:11:13 2/17/02
(1)
Re: kenyon alcohol stove parts
-
Brett Peck
12:02:42 2/21/02
(0)
info on older smaller tunnel drive Penn Yans
-
Ed Mitchell
21:54:38 2/16/02
(11)
Have '70 Penn Yann Explorer interested in selling!
-
Tom G
19:38:47 2/23/02
(0)
Re: info on older smaller tunnel drive Penn Yans
-
Seafoam
20:42:58 2/17/02
(1)
Re: info on older smaller tunnel drive Penn Yans
-
mike shamroy
12:22:32 2/18/02
(0)
Re: info on older smaller tunnel drive Penn Yans
-
Seafoam
07:45:12 2/17/02
(7)
Re: info on older smaller tunnel drive Penn Yans
-
mike shamroy
12:20:53 2/17/02
(6)
Re: info on older smaller tunnel drive Penn Yans
-
Ed Mitchell
19:33:52 2/17/02
(5)
I`m here
-
Mike Gildea
20:20:41 2/17/02
(3)
Re: I`m here
-
Mike Gildea
20:34:06 2/17/02
(2)
Re: I`m here
-
mike shamroy
12:50:26 2/18/02
(0)
Re: I`m here
-
Ed Mitchell
21:30:39 2/17/02
(0)
Re: info on older smaller tunnel drive Penn Yans
-
mik shamroy
20:04:37 2/17/02
(0)
Need advice on window sealants
-
D.Palm
23:53:08 2/15/02
(1)
Re: Need advice on window sealants
-
Bootlegger
13:19:31 2/16/02
(0)
Penn Yann 1977
-
Rene and Mercy
18:53:59 2/15/02
(2)
Penn Yan 1977
-
Andy B.
10:19:06 2/16/02
(0)
Re: Penn Yann 1977
-
Rene Mercy
07:22:33 2/16/02
(0)
switching to electronic ignition system
-
TIM D.
00:58:51 2/15/02
(3)
Re: switching to electronic ignition system
-
Bill H
07:53:52 2/17/02
(0)
Re: switching to electronic ignition system
-
Rich
23:43:47 2/16/02
(1)
Re: switching to electronic ignition system
-
TIM D
03:54:29 2/17/02
(0)
FRONT WINDSHIELD
-
TIM D
19:39:20 2/14/02
(2)
Re: FRONT WINDSHIELD
-
Brian
11:27:48 2/15/02
(1)
Re: FRONT WINDSHIELD
-
TIM D.
17:54:40 2/15/02
(0)
1974 PY 23 FT. FB
-
Tim D
12:57:27 2/14/02
(8)
Re: 1974 PY 23 FT. FB
-
Doc Watson
07:14:21 3/08/02
(1)
Re: 1974 PY 23 FT. FB
-
TIM D
23:45:15 3/08/02
(0)
Re: 1974 PY 23 FT. FB
-
Sully
10:01:29 2/20/02
(0)
Ignorance leads to Stupidity
-
Lenny from LI
16:44:39 2/19/02
(0)
Re: 1974 PY 23 FT. FB
-
Mike W
17:20:34 2/14/02
(0)
Re: 1974 PY 23 FT. FB
-
Capt. David Pierucci
16:40:14 2/14/02
(1)
Re: 1974 PY 23 FT. FB
-
Chuck Rothert
18:13:00 2/14/02
(0)
Re: 1974 PY 23 FT. FB
-
ALD
14:59:13 2/14/02
(0)
Stainless Vs Nibryl
-
AlMar
08:22:42 2/14/02
(2)
Re: Stainless Vs Nibryl
-
Brett Peck
11:59:26 2/14/02
(1)
Re: Stainless Vs Nibryl
-
Brett Peck
18:32:43 2/14/02
(0)
1974 PY 23 FT. FB
-
Tim D
23:05:36 2/13/02
(6)
Re: 1974 PY 23 FT. FB
-
Ed Mitchell
22:13:31 2/16/02
(0)
Re: 1974 PY 23 FT. FB
-
Brett Peck
12:21:18 2/14/02
(1)
Re: 1974 PY 23 FT. FB
-
Tim D
13:16:00 2/14/02
(0)
Re: 1974 PY 23 FT. FB
-
Brett Peck
12:18:53 2/14/02
(0)
Re: 1974 PY 23 FT. FB
-
Mark
09:59:27 2/14/02
(0)
Re: 1974 PY 23 FT. FB
-
Steve T
00:54:34 2/14/02
(0)
WOT
-
Lawdog
23:32:11 2/12/02
(6)
Re: WOT
-
Mark
17:34:21 2/13/02
(2)
Re: WOT
-
AlMar
08:12:02 2/14/02
(1)
Re: WOT
-
Mark
09:56:50 2/14/02
(0)
Re: WOT
-
Almar
06:57:40 2/13/02
(2)
Re: WOT
-
J. L. Howard
17:38:30 2/13/02
(1)
Re: WOT
-
Jorge
18:56:07 2/13/02
(0)
Water in Fuel Tank Was Water in Engine
-
Steve T.
14:53:01 2/11/02
(9)
Re: Water in Fuel Tank Was Water in Engine
-
Seafoam
19:21:32 2/13/02
(0)
Re: Water in Fuel Tank Was Water in Engine
-
Steve T.
17:08:55 2/13/02
(0)
Re: Water in Fuel Tank Was Water in Engine
-
L.C.
13:18:33 2/12/02
(0)
Re: Water in Fuel Tank Was Water in Engine
-
Bill H.
17:48:30 2/11/02
(5)
Re: Water in Fuel Tank Was Water in Engine
-
Mark
10:31:05 2/12/02
(0)
Re: Water in Fuel Tank Was Water in Engine
-
Steve Lawson
22:48:47 2/11/02
(3)
Re: Water in Fuel Tank Was Water in Engine
-
Ed Mitchell
06:50:18 2/12/02
(2)
Re: Water in Fuel Tank Was Water in Engine
-
Mark
16:36:30 2/12/02
(0)
Re: Water in Fuel Tank Was Water in Engine
-
Chuck Rothert
09:00:28 2/12/02
(0)
Penn Yan Owners Gathering 2003
-
Slow Poke
01:30:00 2/11/02
(12)
Re: Penn Yan Owners Gathering 2003
-
ZEKE
20:31:31 2/25/02
(0)
Re: Penn Yan Owners Gathering 2003
-
Brett Peck
12:13:08 2/12/02
(3)
Re: Penn Yan Owners Gathering 2003
-
Seafoam
19:13:19 2/13/02
(0)
Re: Penn Yan Owners Gathering 2003
-
Brian
12:21:21 2/12/02
(1)
Re: Penn Yan Owners Gathering 2003
-
Brett Peck
18:31:34 2/12/02
(0)
Re: Penn Yan Owners Gathering 2003
-
bill bullock
11:28:13 2/12/02
(0)
Re: Penn Yan Owners Gathering 2003
-
L.C.
08:47:23 2/12/02
(0)
Re: Penn Yan Owners Gathering 2003
-
AlMar
07:34:23 2/11/02
(4)
Re: Penn Yan Owners Gathering 2003
-
mike shamroy
18:15:04 2/11/02
(3)
Re: Penn Yan Owners Gathering 2003
-
Capt. Ron Pagliaro
18:28:50 2/11/02
(2)
Re: Penn Yan Owners Gathering 2003
-
Jorge
21:03:25 2/11/02
(1)
Re: Penn Yan Owners Gathering 2003
-
Seafoam
06:34:53 2/12/02
(0)
Reconditioned Props
-
Lenny from LI
12:36:49 2/10/02
(6)
Re: Reconditioned Props
-
Brett Peck
11:34:36 2/11/02
(0)
Re: Reconditioned Props
-
Chuck Rothert
07:52:38 2/11/02
(0)
Props and tunnels
-
Mike Gildea
21:08:08 2/10/02
(0)
Re: Reconditioned Props
-
BILL H.
16:14:47 2/10/02
(0)
Re: Reconditioned Props
-
BILL H.
16:14:31 2/10/02
(1)
Re: Reconditioned Props
-
AlMar
10:16:26 2/22/02
(0)
fuel tanks
-
Tim D
09:19:59 2/09/02
(2)
Re: fuel tanks
-
Slow Poke
12:46:57 2/10/02
(0)
Re: fuel tanks
-
BILL H.
14:22:55 2/09/02
(0)
fuel tanks
-
Tim D
09:19:38 2/09/02
(0)
Penn Yan get-together & strut info
-
Seafoam
07:43:44 2/09/02
(6)
Re: Penn Yan get-together & strut info
-
Chuck Rothert
13:28:46 2/10/02
(0)
Re: Penn Yan get-together & strut info
-
Chuck Rothert
08:59:30 2/09/02
(4)
Re: Penn Yan get-together & strut info
-
Seafoam
20:58:17 2/09/02
(3)
Re: Penn Yan get-together & strut info
-
Chuck Rothert
10:54:30 2/10/02
(2)
Re: Penn Yan get-together & strut info
-
Bill R.
12:14:43 2/10/02
(1)
Re: Penn Yan get-together & strut info
-
Seafoam
19:19:52 2/10/02
(0)
Prop News
-
Lawdog
15:37:03 2/08/02
(8)
Re: Prop News
-
Lawdog
14:37:12 2/13/02
(2)
Re: Prop News
-
Brett Peck
12:45:41 2/14/02
(0)
Re: Prop News
-
Brett Peck
12:25:08 2/14/02
(0)
Re: Prop News
-
Brett Peck
11:55:55 2/11/02
(2)
Re: Prop News
-
Lawdog
17:02:51 2/12/02
(1)
Re: Prop News
-
Brett Peck
11:34:54 2/13/02
(0)
URL
-
Lawdog
15:38:40 2/08/02
(1)
Re: URL
-
Tim D
05:21:44 2/09/02
(0)
23 penn yan
-
Ray Holmes
15:26:00 2/08/02
(2)
Re: 23 penn yan
-
Ray HOLMES
05:05:24 2/14/02
(0)
Re: 23 penn yan
-
Seafoam
19:07:39 2/08/02
(0)
Hull number
-
Chuck
21:50:58 2/07/02
(2)
Re: Hull number
-
Seafoam
21:09:32 2/08/02
(1)
Re: Hull number
-
Chuck
17:02:03 2/09/02
(0)
PROPELLER
-
TIM D
19:41:21 2/07/02
(1)
PROPELLER
-
Mike Gildea
23:27:06 2/07/02
(0)
what model
-
Danny Frederick
10:41:21 2/07/02
(1)
Saber
-
Mike Gildea
23:12:37 2/07/02
(0)
Response to request for stats on twin 26 PY
-
Mike Gildea
22:00:22 2/06/02
(0)
HEY SLOW-POKE
-
TIM D.
18:24:43 2/06/02
(4)
Re: HEY SLOW-POKE
-
Slow Poke
01:02:52 2/07/02
(3)
Re: HEY SLOW-POKE
-
TIM D
07:31:04 2/07/02
(2)
Re: HEY SLOW-POKE
-
Slow Poke
22:51:52 2/07/02
(1)
Re: HEY SLOW-POKE
-
AlMar
07:19:19 2/08/02
(0)
1974 PENN YAN FLYBRIDGE
-
TIM D
17:26:13 2/06/02
(3)
Re: 1974 PENN YAN FLYBRIDGE
-
AlMar
07:10:53 2/08/02
(0)
1974 PENN YAN
-
Mike Gildea
22:20:27 2/06/02
(0)
Re: 1974 PENN YAN FLYBRIDGE
-
Bill H
21:41:21 2/06/02
(0)
Marine Distributor
-
John
12:22:10 2/06/02
(3)
Re: Marine Distributor
-
John
08:14:00 2/07/02
(0)
Marine Distributor
-
Mike Gildea
22:33:12 2/06/02
(0)
Re: Marine Distributor
-
Slow Poke
16:03:48 2/06/02
(0)
Challanger window sliders
-
D.Palm
02:37:18 2/06/02
(2)
Re: Challanger window sliders
-
Brian
09:34:11 2/06/02
(1)
Re: Challanger window sliders
-
D.Palm
23:17:37 2/07/02
(0)
Home Depot 110 v. Hot Water Tank ?
-
Mike Holden
15:28:44 2/05/02
(4)
Re: Home Depot 110 v. Hot Water Tank ?
-
Brian Williams
23:38:59 2/22/02
(0)
residential heater
-
Mike Gildea
22:42:36 2/06/02
(0)
I should add - boat used in freshwater only, No heat exchangers.
-
Mike H
09:11:17 2/06/02
(0)
Re: Home Depot 110 v. Hot Water Tank ?
-
Burney
18:49:58 2/05/02
(0)
1974 PENN YAN
-
TIM D
14:42:36 2/05/02
(0)
engine rotation
-
Bill
12:31:48 2/05/02
(0)
reverse rotation
-
Danny Frederick
19:13:41 2/04/02
(5)
Re: reverse rotation
-
Mike Gildea
22:59:29 2/06/02
(1)
Re: reverse rotation
-
D.Palm
23:36:37 2/07/02
(0)
Re: reverse rotation
-
AlMar
07:15:01 2/05/02
(2)
Re: reverse rotation
-
ALD
08:46:59 2/05/02
(1)
Re: reverse rotation
-
D.Palm
23:54:39 2/07/02
(0)
any one need to repower?
-
D.Palm
23:50:48 2/03/02
(2)
Re: any one need to repower?
-
Chuck Rothert
11:29:49 2/04/02
(0)
Re: any one need to repower?
-
AlMar
07:23:11 2/04/02
(0)
'73 23' challanger restoration
-
D. Palm
23:09:33 2/03/02
(1)
Re: '73 23' challanger restoration
-
gmeseroll
08:02:41 2/04/02
(0)
Prop wisdom?
-
Burney
23:29:01 2/02/02
(2)
Re: Prop wisdom?
-
Brett Peck
12:01:53 2/04/02
(0)
Re: Prop wisdom?
-
Chuck Rothert
11:57:18 2/04/02
(0)
1974 PENN YAN
-
TIM
17:19:52 2/02/02
(6)
H.I.D. for PY
-
Mike Gildea
20:57:45 2/03/02
(1)
P.S. Beam
-
Mike Gildea
21:05:46 2/03/02
(0)
Re: 1974 PENN YAN
-
Bill H.
18:08:31 2/02/02
(3)
Re: 1974 PENN YAN
-
TIM D.
18:31:46 2/02/02
(2)
Re: 1974 PENN YAN
-
BILL
18:34:09 2/02/02
(1)
Re: 1974 PENN YAN
-
Bill H.
19:54:02 2/02/02
(0)
26' Twin 302's
-
Lenny from LI
18:28:22 2/01/02
(6)
Re: 26' Twin 302's
-
M.J.C.
08:08:52 2/06/02
(1)
Re: 26' Twin 302's
-
lenny from LI
12:45:04 2/10/02
(0)
Re: 26' Twin 302's
-
Ed Mitchell
21:54:42 2/01/02
(0)
Replace the steering
-
Andy B.
19:17:58 2/01/02
(0)
Re: 26' Twin 302's
-
Bill H.
18:39:16 2/01/02
(0)
Re: 26' Twin 302's
-
Bill H.
18:38:39 2/01/02
(0)
Marine Engine Catalog
-
gmeseroll
07:02:04 2/01/02
(9)
Re: Marine Engine Catalog
-
Rich
13:16:40 2/03/02
(0)
Re: Marine Engine Catalog
-
Rich
13:16:30 2/03/02
(0)
Factory Rebuilt Engines for Chevrolet and GM cars, trucks, and Marine
-
gmeseroll
08:35:58 2/02/02
(3)
Re: Hi rise manifold clearance
-
Capt. David Pierucci
06:37:24 2/03/02
(2)
Re: Hi rise manifold clearance
-
L.C.
08:43:07 2/04/02
(0)
Re: Hi rise manifold clearance
-
gmeseroll
07:28:48 2/03/02
(0)
Re: Marine Engine Catalog
-
gmeseroll
07:10:11 2/01/02
(2)
Re: Marine Engine Catalog
-
Bill R.
21:02:49 2/01/02
(0)
Re: Marine Engine Catalog
-
AlMar
10:22:11 2/01/02
(0)
water in chrysler 360
-
mike shamroy
17:15:42 1/31/02
(1)
Re: water in chrysler 360
-
jim
11:39:44 2/06/02
(0)
PY w/OUTDRIVE!
-
Seafoam
09:47:21 1/31/02
(12)
What the !@#$%^&*(
-
Mark
18:16:43 1/31/02
(10)
Re: What the !@#$%^&*(
-
Andy B.
15:26:14 2/01/02
(7)
Re: What the !@#$%^&*(
-
Mark
17:40:17 2/01/02
(1)
Re: What the !@#$%^&*(
-
Chuck Rothert
10:41:30 2/02/02
(0)
Re: What the !@#$%^&*(
-
Chuck Rothert
15:54:09 2/01/02
(4)
Pocket Drive?
-
Andy B.
19:30:44 2/01/02
(0)
Re: What the !@#$%^&*(
-
Mark
17:45:32 2/01/02
(2)
Re: What the !@#$%^&*(
-
Chuck Rothert
11:05:12 2/02/02
(0)
Mark, you're liv'in in the wrong place!
-
Andy B.
19:26:12 2/01/02
(0)
Re: What the !@#$%^&*(
-
Seafoam
19:43:50 1/31/02
(1)
Re: What the !@#$%^&*(
-
Mark
13:18:57 2/01/02
(0)
Re: PY w/OUTDRIVE!
-
Chuck Rothert
14:00:18 1/31/02
(0)
Took deliver of OJ's 4-Blade
-
Chuck Rothert
09:14:56 1/31/02
(5)
Eric-Do you take trade ins?
-
Seafoam
19:56:42 1/31/02
(0)
Re: Took deliver of OJ's 4-Blade
-
Sully
12:15:54 1/31/02
(0)
Re: Took deliver of OJ's 4-Blade
-
Sully
12:14:38 1/31/02
(0)
Re: Took deliver of OJ's 4-Blade
-
Mark
09:55:31 1/31/02
(1)
Re: Took deliver of OJ's 4-Blade
-
Chuck Rothert
10:15:58 1/31/02
(0)
The trick to gages
-
Burney
18:36:12 1/30/02
(2)
Re: The trick to gauges
-
Mark
09:54:04 1/31/02
(0)
Re: The trick to gages
-
AlMar
07:04:37 1/31/02
(0)
IS WINTER HERE?????
-
mike shamroy
17:28:27 1/30/02
(2)
Re: IS WINTER HERE?????
-
AlMar
07:06:55 1/31/02
(1)
Re: IS WINTER HERE?????
-
mike shamroy
17:10:24 1/31/02
(0)
Fibre Glast
-
gmeseroll
07:38:18 1/30/02
(0)
FYI
-
Seafoam
06:51:54 1/30/02
(0)
'77 26' FB Twin 360 PY Performance Review
-
Steve Lawson
16:18:14 1/29/02
(1)
Vindicator '74 26' FB Twin 225hp PY Performance Review
-
Mike Gildea
21:01:50 1/29/02
(0)
Water in chrysler 360
-
Steve T.
14:59:58 1/29/02
(6)
Re: Water in chrysler 360
-
mike shamroy
04:22:08 1/31/02
(0)
Re: Water in chrysler 360
-
L.C.
15:18:05 1/29/02
(4)
: Disaster shortcut
-
Mike Gildea
22:35:57 1/30/02
(3)
Re: : Disaster shortcut
-
Mark
09:50:43 1/31/02
(2)
Re: : Disaster shortcut
-
Steve T.
13:00:16 1/31/02
(1)
Re: : Disaster shortcut
-
jim
11:44:23 2/06/02
(0)
WANTED TACHOMETER
-
Seafoam
20:11:45 1/28/02
(7)
replacing guages and sending units
-
Mike Gildea
22:53:15 1/30/02
(0)
Re: WANTED TACHOMETER
-
Jorge Brunet
23:23:33 1/29/02
(0)
Re: WANTED TACHOMETER
-
Mark
10:47:35 1/29/02
(3)
Re: WANTED TACHOMETER
-
Seafoam
06:41:08 1/30/02
(2)
Re: WANTED TACHOMETER
-
Mark
11:55:24 1/30/02
(1)
Re: WANTED TACHOMETER
-
Seafoam
21:45:37 1/30/02
(0)
Re: WANTED TACHOMETER
-
Bill R.
10:43:14 1/29/02
(0)
Bigger than expected- 26ft.
-
Lenny
17:24:50 1/28/02
(3)
Re: Bigger than expected- 26ft.
-
Tim Drury
13:48:25 1/31/02
(0)
Re: Bigger than expected- 26ft.
-
Seafoam
22:06:31 1/30/02
(0)
Re: Bigger than expected- 26ft.
-
Mark
10:45:14 1/29/02
(0)
Bigger than expected- 26ft.
-
Lenny
17:23:54 1/28/02
(0)
IS WINTER HERE?????
-
mike shamroy
16:29:24 1/28/02
(2)
Re: IS WINTER HERE?????
-
Sully
17:11:11 1/30/02
(0)
Re: IS WINTER HERE?????
-
Bootlegger
22:39:05 1/28/02
(0)
1984 26' PY 454 Inboard ( Not Tunnel) Cuddy on E-Bay
-
Brian Gozdenovich
13:20:51 1/28/02
(0)
Engine Hatches
-
gmeseroll
08:05:01 1/28/02
(7)
Re: Engine Hatches
-
jim k.
20:12:43 2/01/02
(0)
Re: Engine Hatches
-
Sully
17:23:42 1/30/02
(0)
Re: Engine Hatches
-
Steve Lawson
16:10:10 1/29/02
(1)
Re: Engine Hatches
-
gmeseroll
07:18:12 1/30/02
(0)
Re: Engine Hatches
-
Steve Lawson
16:06:39 1/29/02
(0)
Re: Engine Hatches
-
Brett Peck
11:50:15 1/28/02
(0)
Re: Engine Hatches
-
Bill H.
09:07:09 1/28/02
(0)
The boat
-
gmeseroll
07:42:03 1/28/02
(1)
Re: The boat
-
Brian Gozdenovich
13:03:42 1/28/02
(0)
BACK IN THE @#%@# WATER AGAIN!
-
Seafoam
22:48:40 1/27/02
(7)
Re: BACK IN THE @#%@# WATER AGAIN!
-
Mark
09:53:00 1/28/02
(2)
Re: BACK IN THE @#%@# WATER AGAIN!
-
Seafoam
06:53:11 1/29/02
(0)
Re: BACK IN THE @#%@# WATER AGAIN!
-
Bootlegger
22:33:38 1/28/02
(0)
Re: BACK IN THE @#%@# WATER AGAIN!
-
Wayne
07:06:18 1/28/02
(1)
Re: BACK IN THE @#%@# WATER AGAIN!
-
Seafoam
07:16:52 1/28/02
(0)
Re: BACK IN THE @#%@# WATER AGAIN!
-
Capt. David Pierucci
06:57:15 1/28/02
(1)
Re: BACK IN THE @#%@# WATER AGAIN!
-
Seafoam
07:24:51 1/28/02
(0)
From the bottom up
-
AlMar
12:23:50 1/25/02
(17)
Re: From the bottom up
-
Mike Wood
10:36:45 1/27/02
(7)
Re: From the bottom up
-
Bill H.
19:09:56 1/28/02
(1)
Re: From the bottom up
-
Mike Wood
23:10:19 1/29/02
(0)
Re: From the bottom up
-
Brett Peck
11:53:23 1/28/02
(4)
Re: From the bottom up
-
Mike Wood
23:21:24 1/29/02
(0)
Re: From the bottom up
-
Bootlegger
22:22:37 1/28/02
(2)
Re: From the bottom up
-
Brett Peck
17:33:23 1/29/02
(1)
Re: From the bottom up
-
Bootlegger
00:15:17 1/30/02
(0)
Re: From the bottom up
-
Steve Lawson
23:10:48 1/25/02
(0)
Re: From the bottom up
-
Chuck Rothert
14:57:45 1/25/02
(3)
Re: From the bottom up
-
Brian Gozdenovich
15:20:42 1/25/02
(2)
Re: From the bottom up
-
Chuck Rothert
16:08:34 1/25/02
(1)
Re: From the bottom up
-
Wayne
17:22:07 1/25/02
(0)
Re: From the bottom up
-
Mark
13:57:49 1/25/02
(2)
Re: From the bottom up-Mark
-
AlMar
15:10:12 1/25/02
(1)
Re: From the bottom up-Mark
-
Mark
08:11:26 1/26/02
(0)
Re: From the bottom up
-
Brian Gozdenovich
13:30:38 1/25/02
(0)
Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Epp
14:19:52 1/24/02
(12)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
L.C.
09:14:29 1/25/02
(5)
Mopars are good
-
Mark
14:08:35 1/25/02
(2)
Re: Mopars are good
-
Bill R
14:39:56 1/26/02
(1)
Re: Mopars are good
-
Mark
09:50:25 1/28/02
(0)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Brett Peck
13:28:29 1/25/02
(0)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Steve Dygert
09:40:56 1/25/02
(0)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Mark
18:33:58 1/24/02
(0)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Brett Peck
16:38:40 1/24/02
(1)
Good Humble brett
-
Chuck Rothert
19:40:29 1/24/02
(0)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Chuck Rothert
15:29:54 1/24/02
(0)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Seafoam
15:17:28 1/24/02
(1)
Re: Rebuilding a Chrysler Marine 360 Reverse Rotation Engine
-
Andy B.
16:47:34 1/26/02
(0)
Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Chris - Key West
00:53:26 1/24/02
(18)
Re: Buying 82 PY
-
Andy B.
12:12:11 1/29/02
(0)
More Pics Soon - Close ups of transom/stringers & Galley, etc
-
Chris - Key West
16:17:09 1/24/02
(1)
limber holes
-
Brett Peck
16:28:44 1/24/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Brett Peck
13:16:57 1/24/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Mark
12:34:29 1/24/02
(10)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Chris - Key West
16:11:20 1/24/02
(9)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Mark
11:21:33 1/28/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Brett Peck
16:24:54 1/24/02
(7)
Am I buying this PY??? YES...I am just looking for advice....
-
Chris - Key West
00:53:56 1/25/02
(2)
Re: Am I buying this PY??? YES...I am just looking for advice....
-
Brett Peck
13:22:19 1/25/02
(1)
I forsee a long journey ahead....please be patient...
-
Chris - Key West
13:43:19 1/25/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Brian Gozdenovich
18:06:38 1/24/02
(3)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Brett Peck
13:49:36 1/25/02
(1)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Brian Gozdenovich
14:23:36 1/25/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Chris - Key West
00:58:49 1/25/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Bill H
11:14:49 1/24/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Chuck Rothert
10:23:31 1/24/02
(0)
Re: Buying 82 PY - Pictures of Transom!!!!! Please give advice
-
Capt. David Pierucci
08:01:29 1/24/02
(0)
upgrading a 1969 22' Baracuda
-
Rick Baldwin
08:09:04 1/22/02
(3)
Electronic ignition
-
Mark
13:01:20 1/22/02
(1)
Re: Electronic ignition
-
Rick
08:18:40 1/23/02
(0)
Re: upgrading a 1969 22' Baracuda
-
Rick Baldwin
08:10:00 1/22/02
(0)
Engine!! Crusader 350 Engine - Strength & Weaknesses
-
Chris - Key West
23:30:21 1/21/02
(31)
Re: Engine!! Crusader 350 Engine - Strength & Weaknesses
-
D. Palm
22:53:10 2/03/02
(0)
They are all pretty good,
-
Mark
12:58:27 1/22/02
(9)
Re: They are all pretty good,TEMP QUESTION Mark
-
Chuck Rothert
13:48:55 1/22/02
(8)
Re: They are all pretty good,TEMP QUESTION Mark
-
Brett Peck
20:37:11 1/22/02
(0)
Thermostats
-
Mark
17:28:59 1/22/02
(6)
Re: Thermostats
-
Bill
23:51:21 1/22/02
(5)
Agreed
-
Mark
09:21:58 1/23/02
(4)
Re: Agreed
-
Chuck Rothert
08:51:24 1/24/02
(3)
Re: Agreed
-
Mark
11:31:42 1/25/02
(2)
Re: Agreed
-
Chuck Rothert
15:13:48 1/25/02
(1)
Re: Agreed
-
Mark
11:13:44 1/28/02
(0)
Re: Engine!! Crusader 350 Engine - Strength & Weaknesses
-
Al Devernoe
07:24:19 1/22/02
(19)
Re: Engine!! Crusader 350 Engine - Strength & Weaknesses
-
Chris - Key West
11:19:51 1/22/02
(18)
Why rebuild??
-
Mark
14:02:08 1/23/02
(17)
MARK - Why rebuild?? --- Cost of Marine Grade Longblock 350??
-
Chris - Key West
23:08:00 1/23/02
(16)
Re: MARK - Why rebuild?? --- Cost of Marine Grade Longblock 350??
-
Brett Peck
12:15:31 1/24/02
(0)
Re: MARK - Why rebuild?? --- Cost of Marine Grade Longblock 350??
-
Brett Peck
12:11:28 1/24/02
(8)
Re: MARK - Why rebuild?? LOOK - Yes- HUMBLE
-
brett peck
15:01:52 1/24/02
(7)
Humble Shmumble
-
Brett Peck
16:34:09 1/24/02
(6)
Re: Humble Shmumble
-
Chuck Rothert
19:19:32 1/24/02
(5)
The best learning experience of all..............
-
Mark
09:49:24 1/25/02
(4)
"Giant hole in the water where you throw money"
-
Chris - Key West
14:00:40 1/25/02
(0)
Re: The best learning experience of all..............
-
Brett Peck
13:32:45 1/25/02
(2)
Re: The best learning experience of all..............
-
Mark
16:47:25 2/12/02
(0)
Re: The best learning experience of all..............
-
Bill R
14:07:05 1/26/02
(0)
Re: MARK - Why rebuild?? --- Cost of Marine Grade Longblock 350??
-
MArk
09:25:57 1/24/02
(5)
MARK - Duval Street! - Thanks
-
Chris - Key West
14:05:33 1/25/02
(4)
Re: MARK - Duval Street! - Thanks
-
Bootlegger
18:20:07 1/25/02
(3)
Towing with the Blazer
-
Chris - Key West
01:04:11 1/26/02
(2)
Re: Towing with the Blazer
-
Bootlegger Don
05:36:18 1/26/02
(1)
Re: Towing with the Blazer
-
Chris - Key West
13:45:07 1/26/02
(0)
Core Materials & Stringers
-
Chris - Key West
23:05:29 1/21/02
(2)
Re: Core Materials & Stringers
-
Bootlegger
08:13:24 1/22/02
(1)
Re: Core Materials & Stringers
-
ty
23:08:50 1/22/02
(0)
OOPS! CHRIS
-
Seafoam
08:30:16 1/20/02
(2)
Re: OOPS! CHRIS
-
Chris - Key West
15:18:02 1/20/02
(1)
Re: OOPS! CHRIS
-
Al Devernoe
12:41:09 1/21/02
(0)
CHRIS-"HOLD UP" BUYING THAT BOAT
-
Seafoam
08:27:19 1/20/02
(0)
TJ from Penn yan tries to set record straight
-
TJ
01:51:16 1/20/02
(6)
AndyB, Every made the trip from OBX to Norfolk by ICW?
-
Burney
21:11:30 1/23/02
(0)
Re: TJ from Penn yan tries to set record straight
-
Andy B.
21:24:33 1/22/02
(1)
Re: for Andy
-
almar
11:06:49 1/23/02
(0)
Re: TJ from Penn yan tries to set record straight
-
Seafoam
07:46:26 1/20/02
(2)
Re: TJ from Penn yan
-
RONNIE G
22:03:00 1/28/02
(0)
Re: TJ from Penn yan tries to set record straight
-
Seafoam
08:16:05 1/20/02
(0)
'78 24' cuddy for sale
-
Mr.Nally
18:58:13 1/18/02
(2)
Re: '78 24' cuddy for sale
-
Budd
08:06:41 1/24/02
(0)
Re: '78 24' cuddy for sale
-
Seafoam
19:30:26 1/18/02
(0)
I Forget??
-
Chuck Rothert
12:13:19 1/18/02
(8)
Re: I Forget??
-
Brett Peck
17:21:38 1/18/02
(0)
Re: I Forget??
-
Mark
15:10:22 1/18/02
(6)
Re: I Forget??
-
Brett Peck
17:23:41 1/18/02
(5)
Re: I Forget??
-
Mark
08:32:52 1/21/02
(3)
Re: I Forget??
-
Chuck Rothert
12:09:23 1/21/02
(2)
twin 502's
-
Mark
15:48:06 1/21/02
(1)
Re: twin 502's
-
Chuck Rothert
19:17:32 1/21/02
(0)
Re: I Forget??
-
Seafoam
19:27:17 1/18/02
(0)
For Sale: 24' 76PY - - bought a bigger PY!
-
Burney
23:56:29 1/17/02
(1)
Re: For Sale: 24' 76PY - - bought a bigger PY!
-
Budd
11:37:04 1/21/02
(0)
Shaft Seal vs. Stuffing Box?
-
Seafoam
23:39:22 1/17/02
(6)
Re: Shaft Seal vs. Stuffing Box?
-
Bill H.
13:19:58 1/18/02
(0)
Re: Shaft Seal vs. Stuffing Box?
-
Brett Peck
11:39:36 1/18/02
(1)
Re: Shaft Seal vs. Stuffing Box?
-
Seafoam
19:35:19 1/18/02
(0)
Re: Shaft Seal vs. Stuffing Box?
-
Mark
09:36:50 1/18/02
(0)
Re: Shaft Seal vs. Stuffing Box?
-
Steve Lawson
23:59:39 1/17/02
(0)
Re: Shaft Seal vs. Stuffing Box?
-
Steve Lawson
23:59:19 1/17/02
(0)
Autopilot--SportPilot Plus?
-
Steve Lawson
01:37:17 1/17/02
(0)
PARTS Sport Fisher 360 Chry. 250 23ft 1978
-
Mallard Island/S. Jersey
09:25:36 1/16/02
(1)
Re: PARTS Sport Fisher 360 Chry. 250 23ft 1978
-
Brian Gozdenovich
17:02:40 1/16/02
(0)
1972 Penn Yan Flybridge For Sale
-
Mark
11:30:51 1/14/02
(0)
1985 PY - About to buy one - Any Advice
-
Chris
12:58:45 1/13/02
(16)
Re: 1985 PY - About to buy one - HOLD IT!!
-
Penn Yan Marine Mfg. Corp.
16:55:50 1/19/02
(0)
FYI Walkaround hull after 84
-
Mike Gildea
21:49:47 1/15/02
(1)
Re: FYI Walkaround hull after 84
-
Chris
14:09:31 1/16/02
(0)
Re: 1985 PY - About to buy one - Any Advice
-
Seafoam
06:54:32 1/15/02
(6)
Found out this is an 82 - NOT an 85. Does this change equation?
-
Chris
14:17:40 1/16/02
(5)
Re: Found out this is an 82 - NOT an 85. Does this change equation?
-
Seafoam
07:11:37 1/17/02
(2)
Re: Found out this is an 82 - NOT an 85. Does this change equation?
-
Chris - Key West, FL
23:00:44 1/19/02
(1)
Re: Found out this is an 82 - NOT an 85. Does this change equation?
-
Bootlegger
13:38:58 1/20/02
(0)
Re: Found out this is an 82 - NOT an 85. Does this change equation?
-
Sully
17:44:36 1/16/02
(1)
Serial # for this PY - HIN PYB25109M820
-
Chris
23:20:14 1/16/02
(0)
Re: 1985 PY - About to buy one - Any Advice
-
Brett Peck
18:49:09 1/14/02
(3)
Rocket Scientists!!!!!
-
Andy B.
20:29:00 1/14/02
(2)
Re: Rocket Scientists!!!!!
-
Brett Peck
11:59:13 1/15/02
(1)
Re: Rocket Scientists!!!!!
-
Chuck Rothert
14:51:20 1/15/02
(0)
Re: 1985 PY - About to buy one - Any Advice
-
Mark
13:12:50 1/14/02
(0)
Re: 1985 PY - About to buy one - Any Advice
-
Bill H.
14:24:08 1/13/02
(0)
1981 23' Cuddy True Blue Too for sale
-
Dave French
10:30:45 1/11/02
(2)
Re: 1981 23' Cuddy for sale
-
Andy B.
11:33:05 1/11/02
(1)
Re: 1981 23' Cuddy for sale
-
Dave French
12:52:19 1/11/02
(0)
1" SS Prop shaft. Who has the best quality and price?
-
Wayne
20:31:45 1/09/02
(5)
Re: 1" SS Prop shaft. Who has the best quality and price?
-
Pete Cooper
18:08:53 1/22/02
(1)
Re: 1" SS Prop shaft. Who has the best quality and price?
-
Wayne
10:26:16 1/23/02
(0)
Re: 1" SS Prop shaft. Who has the best quality and price?
-
Brett Peck
11:52:15 1/11/02
(2)
Re: 1" SS Prop shaft. Who has the best quality and price?
-
Wayne
20:18:23 1/13/02
(1)
Re: 1" SS Prop shaft. Who has the best quality and price?
-
Brett Peck
12:25:40 1/21/02
(0)
1954 Penn Yan Commander For Sale
-
Carmen
14:02:34 1/08/02
(0)
1978 24'flybridge for sale or trade
-
floridafisherman
14:56:22 1/07/02
(3)
Re: 1978 24'flybridge for sale or trade
-
dale
17:31:55 1/18/02
(0)
Re: 1978 24'flybridge for sale or trade
-
Jeff Ledda
14:27:20 1/14/02
(0)
Re: 1978 24'flybridge for sale or trade
-
dale bachman
13:01:43 1/08/02
(0)
Would like to purchase a 30' PY
-
JOE
12:47:49 1/07/02
(1)
Re: Would like to purchase a 30' PY
-
Rich
22:04:09 1/07/02
(0)
I'm getting the 1978 30'SedanFlybridge
-
Burney
13:36:56 1/06/02
(2)
Re: I'm getting the 1978 30'SedanFlybridge
-
Rich
22:14:40 1/07/02
(0)
Re: I'm getting the 1978 30'SedanFlybridge
-
Mark
13:55:08 1/07/02
(0)
Strainer replacement
-
Jay Berkowitz
00:03:08 1/06/02
(3)
Re: Strainer replacement
-
MArk
13:59:33 1/07/02
(0)
Re: Strainer replacement
-
Almar
07:37:15 1/07/02
(0)
Re: Strainer replacement
-
Steve Lawson
02:28:04 1/06/02
(0)
351 vs 302 heads
-
Bill
22:29:04 1/05/02
(2)
Re: 351 vs 302 heads
-
Bob G
19:45:23 1/06/02
(1)
Re: 351 vs 302 heads
-
Bill
01:31:44 1/09/02
(0)
1978 M22 Model VS. Montego
-
Bill Bullock
20:33:19 1/01/02
(8)
1978 M22 Model VS. Montego
-
Mike Gildea
20:28:06 1/02/02
(7)
Re: 1978 M22 Model VS. Montego
-
Wayne Holmes
22:44:11 1/02/02
(6)
Montego
-
Mike Gildea
21:54:05 1/03/02
(5)
Re: Montego
-
Jim C
17:52:37 1/04/02
(1)
Montego
-
Mike Gildea
20:28:19 1/04/02
(0)
Re: Montego
-
Wayne
22:31:28 1/03/02
(2)
Changeover
-
Mike Gildea
20:39:30 1/04/02
(1)
Re: Changeover
-
Bob G
16:10:20 1/05/02
(0)
1978 M22 Model Fuel Tank Removal & Instalation
-
Bill Bullock
17:19:33 1/01/02
(10)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
Bill H
18:51:28 1/01/02
(9)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
Bill Bullock
20:51:34 1/01/02
(8)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
bootlegger Don
06:34:30 1/02/02
(7)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
Bill H.
08:24:29 1/02/02
(6)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
Brett Peck
12:02:01 1/02/02
(5)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
Chuck Rothert
13:23:17 1/02/02
(4)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
Bill H.
16:22:33 1/02/02
(0)
Re: 1978 M22 Model Fuel Tank Removal & Instalation
-
Brian Gozdenovich
14:40:26 1/02/02
(2)
Brett Peck
-
Brian Gozdenovich
14:47:09 1/02/02
(1)
Re: Brett Peck
-
Brett Peck
18:30:26 1/02/02
(0)
Need URL for MSN site
-
Capt. David Pierucci
18:43:43 12/31/01
(2)
Re: Need URL for MSN site
-
Bill
22:48:09 12/31/01
(1)
Just bringing this to the top !!!
-
Bob Boyd
19:30:51 2/27/02
(0)
new to penn yans
-
tony furco
19:59:41 12/30/01
(0)
Fuel Tank Management for Multiple Tanks
-
Steve Lawson
13:57:27 12/30/01
(6)
Re: Fuel Tank Management for Multiple Tanks
-
Rich
13:24:57 1/05/02
(0)
Re: Fuel Tank Management for Multiple Tanks
-
scott hughes
19:29:48 1/01/02
(1)
Re: Fuel Tank Management for Multiple Tanks
-
Steve
02:55:05 1/02/02
(0)
Re: Fuel Tank Management for Multiple Tanks
-
Wayne
22:59:13 12/30/01
(1)
Re: Fuel Tank Management for Multiple Tanks
-
Bill H
23:03:47 12/31/01
(0)
Re: Fuel Tank Management for Multiple Tanks
-
Bill H
16:10:59 12/30/01
(0)
4 Blade prop?
-
Al
07:29:05 12/28/01
(8)
4 Blade prop?
-
Mike Gildea
19:53:37 12/29/01
(0)
Re: 4 Blade prop?
-
Wayne
10:54:29 12/28/01
(4)
Re: Wayne;4 Blade prop?
-
al
12:43:54 12/28/01
(3)
Re: Wayne;4 Blade prop?
-
Wayne
22:42:38 12/30/01
(0)
Re: Wayne;4 Blade prop?
-
Capt. David Pierucci
15:54:17 12/28/01
(1)
Re: Wayne;4 Blade prop?
-
BILL H
12:52:15 12/29/01
(0)
Re: 4 Blade prop?
-
Capt. David Pierucci
08:08:47 12/28/01
(1)
Re: 4 Blade prop?
-
Chuck Rothert
08:54:39 12/28/01
(0)
Sport Fisher 23ft, 360 -250hp- 1978 FB
-
mallard island
14:47:33 12/27/01
(0)
boat transporter needed
-
mike shamroy
08:28:16 12/27/01
(1)
Re: boat transporter needed
-
mike shamroy
08:29:56 12/27/01
(0)
gas rebate
-
john
18:46:36 12/26/01
(3)
Re: gas rebate
-
Almar
07:50:16 1/07/02
(0)
Re: gas rebate
-
KenG
09:47:20 12/31/01
(0)
Re: gas rebate
-
jim k.
19:07:42 12/26/01
(0)
BOAT LIFT FOR SALE
-
***BOAT LIFT FOR SALE
01:13:11 12/26/01
(0)
Tunnel Hull
-
Jim
12:11:55 12/25/01
(11)
Re: Tunnel Hull
-
Dale Tanski
20:47:01 12/26/01
(5)
Re: Tunnel Hull GOT SNOW?
-
Chuck Rothert
16:19:18 12/28/01
(2)
Re: Tunnel Hull GOT SNOW?
-
Dale Tanski
21:01:05 12/31/01
(1)
Re: Tunnel Hull GOT SNOW?
-
Chuck Rothert
08:53:15 1/02/02
(0)
Re: Tunnel Hull
-
Paul Mayfield
19:21:52 12/27/01
(1)
Re: Tunnel Hull
-
Dale Tanski
21:05:10 12/31/01
(0)
Re: Tunnel Hull
-
Al Devernoe
12:58:14 12/26/01
(0)
Re: Tunnel Hull
-
jim k.
19:35:11 12/25/01
(3)
Re: Tunnel Hull
-
Sully
13:24:00 12/26/01
(0)
Re: Tunnel Hull
-
Sully
13:23:02 12/26/01
(0)
Re: Tunnel Hull
-
mike shamroy
09:25:08 12/26/01
(0)
XMAS PRESENT..THE NEW IGNITION IS HERE!!!
-
Capt. David Pierucci
14:22:50 12/24/01
(1)
There IS a Santa Clause
-
Seafoam
08:13:53 12/25/01
(0)
The Legend
-
jim k.
17:46:09 12/23/01
(3)
Re: The Legend
-
Scott
10:23:10 12/24/01
(2)
Re: The Legend
-
jim k.
19:05:56 12/25/01
(0)
"American Series"
-
Seafoam
08:08:42 12/25/01
(0)
26 fb py
-
dale bachman
17:46:06 12/23/01
(2)
Re: 26 fb py
-
jim k.
19:58:39 12/23/01
(0)
New 26ft FB with a 255hp 350GM back in 1978...
-
Mike Gildea
19:44:05 12/23/01
(0)
gel coat
-
D.Palm
01:34:14 12/23/01
(0)
PIPE?
-
TY
21:46:00 12/22/01
(0)
looking for an Avenger
-
Marc
09:56:21 12/22/01
(3)
Re: looking for an Avenger
-
mike shamroy
17:46:12 12/22/01
(2)
Re: looking for an Avenger
-
marc
10:45:46 12/23/01
(1)
Re: looking for an Avenger
-
ray Holmes
17:32:16 12/24/01
(0)
HAPPY.... HAPPY.....HOLIDAYS!!!!!
-
mike shamroy
17:04:03 12/21/01
(1)
Re: HAPPY.... HAPPY.....HOLIDAYS!!!!!
-
jim k.
09:54:06 12/22/01
(0)
Wanderer's on the beach and on the other site
-
Capt. David Pierucci
16:38:34 12/21/01
(0)
Merry Christmas to all.
-
Sully
08:24:23 12/21/01
(5)
Re: Merry Christmas to all.
-
Seafoam
15:22:41 12/21/01
(0)
WARM WISHES FOR--
-
Chuck Rothert
13:35:57 12/21/01
(1)
Happy Holidays!
-
Mark
16:46:37 12/21/01
(0)
Re: Merry Christmas to all.
-
Stoni
11:08:31 12/21/01
(0)
Dittos
-
Capt. David Pierucci
10:57:19 12/21/01
(0)
Fuel lines
-
Al
07:51:57 12/21/01
(3)
Re: Fuel lines
-
Chuck Rothert
17:32:35 12/21/01
(0)
Re: Fuel lines
-
JIM
16:45:47 12/21/01
(1)
Re: Fuel lines
-
D.Palm
00:28:48 12/23/01
(0)
Fuel Tanks
-
John Van Loon
18:26:11 12/20/01
(12)
THESE ARE ALL GOOD COMMENTS!
-
Chuck Rothert
15:27:20 12/22/01
(0)
Fuel Tanks
-
Mike Gildea
18:47:37 12/21/01
(1)
Re: Fuel Tanks
-
Brett Peck
19:54:09 12/22/01
(0)
Don't ignore the wiring
-
Brett Peck
12:36:08 12/21/01
(3)
Re: Don't ignore the wiring
-
Steve Lawson
13:59:53 12/22/01
(0)
Re: Don't ignore the wiring
-
Ty
11:42:30 12/22/01
(0)
Re: Don't ignore the wiring Good Idea Brett!
-
Chuck Rothert
13:03:12 12/21/01
(0)
Re: Fuel Tanks
-
Mark
09:28:18 12/21/01
(0)
Re: Fuel Tanks
-
Chuck Rothert
19:41:03 12/20/01
(1)
Re: Fuel Tanks
-
Bootlegger Don
06:37:26 12/21/01
(0)
Re: Fuel Tanks
-
jim k.
19:10:50 12/20/01
(1)
Re: Fuel Tanks
-
Capt. S. Pellchecker
19:23:49 12/20/01
(0)
"DROPPED HER PANTS"
-
Seafoam
10:35:08 12/20/01
(0)
FWC a 20 year old engine???
-
mike shamroy
07:47:50 12/20/01
(0)
FWC a 20 yr. old enhine?????
-
mike shamroy
10:18:08 12/19/01
(5)
Re: FWC a 20 yr. old enhine?????
-
jim k.
18:16:37 12/23/01
(1)
Re: FWC a 20 yr. old enhine?????
-
mike shamroy
08:12:15 12/27/01
(0)
Re: FWC a 20 yr. old enhine?????
-
Mark
10:50:21 12/19/01
(2)
Re: FWC a 20 yr. old enhine?????
-
almar
16:00:16 12/19/01
(1)
Re: FWC a 20 yr. old enhine?????
-
Mark
09:57:13 12/20/01
(0)
71 Series C or CR, no nameplate?
-
Paul Perini
13:11:29 12/18/01
(6)
Re: 71 Series C or CR, no nameplate? update
-
Paul Perini
11:24:09 12/20/01
(0)
Re: 71 Series C or CR, no nameplate?
-
L.C.
10:57:21 12/19/01
(0)
Re: 71 Series C or CR, no nameplate?
-
Bill
01:12:51 12/19/01
(0)
Re: 71 Series C or CR, no nameplate?
-
Brett Peck
16:19:55 12/18/01
(2)
Re:Reply to Brett, 71 Series C or CR, no nameplate?
-
Paul Perini
18:11:39 12/18/01
(1)
Re:Reply to Brett, 71 Series C or CR, no nameplate?
-
Brett Peck
20:07:22 12/18/01
(0)
TRAILER
-
TY
09:49:10 12/18/01
(3)
Re: TRAILER
-
Wayne
18:33:42 12/19/01
(0)
EZ Loader TRAILER
-
Mike Gildea
21:02:31 12/18/01
(0)
Re: TRAILER
-
Gary
16:39:02 12/18/01
(0)
hardtop removal ?
-
Dan
06:38:24 12/18/01
(3)
Food for thought
-
Mike Gildea
20:20:41 12/18/01
(2)
Re: Food for thought
-
D.Palm
00:47:52 12/23/01
(1)
Re: Food for thought
-
Slapshot
08:28:45 12/24/01
(0)
ATTN CHUCK: SEE the OJ discussion
-
Brett Peck
18:37:07 12/17/01
(4)
Re: ATTN CHUCK: SEE the OJ discussion
-
Chuck Rothert
11:49:35 12/18/01
(0)
Re: ATTN CHUCK: SEE the OJ discussion
-
Brett Peck
10:23:03 12/18/01
(2)
Re: ATTN CHUCK: SEE the OJ discussion
-
Capt. David Pierucci
11:04:08 12/18/01
(1)
Re: ATTN CHUCK: SEE the OJ discussion
-
Brett Peck
12:40:50 12/18/01
(0)
i THINK i'm happy...................
-
mike shamroy
22:24:26 12/16/01
(0)
74 Avenger Re-Power...Thanks for the Help...NEED MORE
-
Mike
22:23:13 12/16/01
(2)
Re: 74 Avenger Re-Power...Thanks for the Help...NEED MORE
-
Bill H.
17:02:30 12/17/01
(0)
Re: 74 Avenger Re-Power...Thanks for the Help...NEED MORE
-
jim k.
07:47:55 12/17/01
(0)
74 Avenger RE-POWER>>>THANKS FOR THE HELP....NEED MORE
-
Mike
22:13:40 12/16/01
(0)
74 Avenger RE-POWER>>>THANKS FOR THE HELP....NEED MORE
-
Mike
22:13:22 12/16/01
(0)
i THINK i'm gonna be happy..................................................................
-
mike shamroy
20:08:27 12/16/01
(0)
ray jefferson
-
jim k
16:07:26 12/16/01
(1)
Re: ray jefferson
-
Mark
18:29:48 12/16/01
(0)
1974 Penn Yan Avenger RE-POWER........WHATS BEST?
-
Mike
11:54:38 12/16/01
(4)
Re: 1974 Penn Yan Avenger RE-POWER........WHATS BEST?
-
Brett Peck
17:34:06 12/17/01
(0)
Re: 1974 Penn Yan Avenger RE-POWER........WHATS BEST?
-
Mark
18:34:18 12/16/01
(2)
Re: 1974 Penn Yan Avenger RE-POWER........WHATS BEST?
-
Seafoam
19:09:51 12/16/01
(1)
Re: 1974 Penn Yan Avenger RE-POWER........WHATS BEST?
-
Mark
11:15:12 12/17/01
(0)
Hey SEAFOAM, NO MORE WHOA's!!!
-
Jim Moore
01:50:58 12/16/01
(0)
MY 26' Twin 360 FB PY
-
Steve Lawson
00:41:45 12/16/01
(1)
Re: MY 26' Twin 360 FB PY
-
scott hughes
12:45:58 12/29/01
(0)
STONI
-
Seafoam
23:24:31 12/15/01
(1)
Re: STONI
-
Stoni
16:12:09 12/17/01
(0)
hardtop mess
-
Dan
19:27:48 12/15/01
(1)
Re: hardtop mess
-
Seafoam
22:45:27 12/15/01
(0)
location of ID plate on velvet drive
-
Paul Perini
14:52:51 12/15/01
(4)
Re: location of ID plate on velvet drive
-
Jim Moore
00:24:32 12/16/01
(1)
Re: location of ID plate on velvet drive
-
Bill
01:18:06 12/16/01
(0)
Re: location of ID plate on velvet drive
-
Seafoam
22:14:32 12/15/01
(1)
Re: location of ID plate on velvet drive
-
Paul Perini
09:47:09 12/16/01
(0)
20ft Penn Yan winterization
-
Ken Blad
10:38:59 12/15/01
(3)
Re: 20ft Penn Yan winterization
-
Wayne Holmes
15:25:41 12/16/01
(0)
Re: 20ft Penn Yan winterization
-
Chuck Rothert
14:47:56 12/15/01
(1)
Re: 20ft Penn Yan winterization
-
Seafoam
23:05:55 12/15/01
(0)
penn yan swift restoration
-
tom mcintyre
07:30:54 12/15/01
(5)
Re: penn yan swift restoration
-
jim manning
15:42:42 12/17/01
(0)
Re: penn yan swift restoration
-
Rob Ebbing
09:35:23 12/17/01
(3)
Re: penn yan swift restoration
-
Jim VanArtsdalen
19:30:03 1/05/02
(0)
Re: penn yan swift restoration
-
Jim VanArtsdalen
19:28:13 1/05/02
(1)
Re: penn yan swift restoration
-
Jim VanArtsdalen
19:48:17 1/05/02
(0)
Whoa's Me! More & More $$$
-
Seafoam
23:12:53 12/14/01
(10)
Re: Whoa's Me! More & More $$$
-
Mark
18:40:55 12/16/01
(4)
Re: Whoa's Me! More & More $$$
-
Seafoam
19:22:23 12/16/01
(3)
Re: Whoa's Me! More & More $$$
-
Brett Peck
17:37:49 12/17/01
(1)
GHOST
-
Seafoam
21:22:36 12/17/01
(0)
Das boat!!
-
Mark
11:29:55 12/17/01
(0)
Re: Whoa's Me! More & More $$$
-
Bootlegger
09:27:42 12/16/01
(0)
Re: Whoa's Me! More & More $$$
-
Capt. David Pierucci
07:52:08 12/15/01
(1)
Re: Whoa's Me! More & More $$$
-
Seafoam
22:02:09 12/15/01
(0)
Re: Whoa's Me! More & More $$$
-
Mike Wood
06:53:20 12/15/01
(1)
Re: Whoa's Me! More & More $$$
-
Seafoam
22:11:47 12/15/01
(0)
Prop rotation, engine and shaft alignment
-
Paul Perini
14:06:03 12/13/01
(6)
Re: Prop rotation, engine and shaft alignment
-
Mike W.
13:20:42 12/14/01
(1)
Re: Prop rotation, engine and shaft alignment
-
Mark
13:46:36 12/14/01
(0)
Re: Prop rotation
-
Andy B.
08:31:21 12/14/01
(0)
On a 23 ft PY prop rotation will be the same as engine
-
Mike Gildea
21:09:31 12/13/01
(2)
Re: On a 23 ft PY prop rotation will be the same as engine
-
Paul Perini
02:07:54 12/14/01
(1)
Correct, most were RH rotation from PY is under 26ft.
-
Mike Gildea
17:03:21 12/14/01
(0)
gas tank prices
-
dan
16:45:44 12/12/01
(4)
Re: gas tank prices
-
Mark
12:05:58 12/14/01
(0)
Re: gas tank prices
-
Bill H.
13:49:33 12/13/01
(0)
Re: gas tank prices
-
Brian Gozdenovich
17:46:49 12/12/01
(1)
Re: gas tank prices
-
Tim D
20:13:22 2/19/02
(0)
360 change over to a 350
-
Florida Fisher
14:57:46 12/12/01
(2)
Re: 360 change over to a 350
-
Stoni
13:38:19 12/13/01
(0)
Re: 360 change over to a 350
-
Mark
17:30:50 12/12/01
(0)
The OTHER Site!!!
-
stoni
13:10:32 12/12/01
(3)
Re: ur pics
-
Almar
08:56:17 12/13/01
(1)
Re: ur pics
-
Stoni
11:40:20 12/13/01
(0)
Re: The OTHER Site!!!
-
Seafoam
16:42:09 12/12/01
(0)
Hardtop problems
-
Dan
21:43:30 12/11/01
(2)
Re: Hardtop problems
-
Mark
12:47:53 12/12/01
(0)
Re: Hardtop problems
-
Seafoam
22:51:03 12/11/01
(0)
Pack up the tent again boys
-
Almar
07:38:54 12/11/01
(0)
LET'S GET THIS "STRAIGHT"
-
Seafoam
04:44:29 12/10/01
(4)
Re: LET'S GET THIS "STRAIGHT"
-
Bill
01:20:34 12/16/01
(1)
Re: LET'S GET THIS "STRAIGHT"
-
Seafoam
10:37:15 12/16/01
(0)
Re: LET'S GET THIS "STRAIGHT"
-
Bootlegger
19:44:10 12/11/01
(1)
Re: LET'S GET THIS "STRAIGHT"
-
Seafoam
13:17:00 12/12/01
(0)
Aluminum floor board trim
-
Wayne
18:39:19 12/09/01
(0)
ATTENTION; U.S. BLUES & OTHER's
-
Seafoam
12:46:35 12/09/01
(10)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Gary
16:47:28 12/11/01
(6)
My Point Exactly!
-
Seafoam
22:57:33 12/11/01
(0)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Bootlegger
19:29:37 12/11/01
(4)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Bootlegger
19:31:32 12/11/01
(3)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Seafoam
23:02:44 12/11/01
(0)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Bob G
20:37:01 12/11/01
(1)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Seafoam
19:20:01 12/12/01
(0)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Bill
14:44:30 12/09/01
(1)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Brett Peck
12:30:57 12/10/01
(0)
Re: ATTENTION; U.S. BLUES & OTHER's
-
Bootlegger
13:00:37 12/09/01
(0)
Winterizing
-
Ian
10:42:42 12/09/01
(5)
Re: Winterizing
-
Bootlegger
12:56:06 12/09/01
(3)
Re: Winterizing
-
ian
19:40:41 12/09/01
(2)
Re: Winterizing
-
Bootlegger
20:55:15 12/09/01
(1)
Penn Yan Deer Stand
-
Seafoam
04:36:06 12/10/01
(0)
Re: Winterizing
-
Seafoam
12:39:59 12/09/01
(0)
WANTED:12" PENNYAN SWIFT
-
Jim Manning
06:22:08 12/09/01
(3)
Re: WANTED:12" PENNYAN SWIFT
-
Carmen
13:22:15 1/08/02
(0)
Re: WANTED:12' PENNYAN SWIFT
-
Seafoam
12:08:18 12/09/01
(1)
Re: WANTED:12' PENNYAN SWIFT
-
Jim Manning
19:57:59 12/10/01
(0)
PY Evaluation Anyone?
-
Steve Lawson
21:17:17 12/08/01
(2)
Re: PY Evaluation Anyone?
-
mike wood
09:18:33 12/10/01
(0)
Re: PY Evaluation Anyone?
-
Seafoam
00:20:15 12/09/01
(0)
20 1/2 Penyan
-
Ken Blad
19:40:46 12/08/01
(2)
Re: 20 1/2 Penyan
-
Seafoam
00:44:13 12/09/01
(1)
Re: 20 1/2 Penyan
-
mike shamroy
11:00:07 12/09/01
(0)
RE: 1957 Swift-Parts needed
-
Rob Ebbing
14:18:36 12/06/01
(3)
Re: RE: 1957 Swift-Parts needed
-
jim manning
06:19:02 12/09/01
(0)
Re: RE: 1957 Swift-Parts needed
-
Seafoam
16:50:09 12/06/01
(1)
Re: RE: 1957 Swift-Parts needed
-
cztswift@aol.com
06:08:03 12/09/01
(0)
Chrysler 340 cu in cast aluminum oil pan
-
Wayne
12:25:48 12/06/01
(4)
Re: Chrysler 340 cu in cast aluminum oil pan
-
Seafoam
18:12:10 12/07/01
(1)
Re: Chrysler 340 cu in cast aluminum oil pan
-
Wayne
22:43:10 12/07/01
(0)
Re: Chrysler 340 cu in cast aluminum oil pan
-
Seafoam
16:48:33 12/06/01
(1)
Re: Chrysler 340 cu in cast aluminum oil pan
-
Mark
09:25:26 12/07/01
(0)
Please !!!!!!Trailer for a PY 20.5 Open Runabout
-
ty
08:53:09 12/06/01
(1)
Re: Please !!!!!!Trailer for a PY 20.5 Open Runabout
-
Seafoam
18:20:56 12/07/01
(0)
26 ft Penn Yan for sale
-
Bill
00:26:29 12/05/01
(2)
Re: 26 ft Penn Yan for sale
-
Mark
09:27:13 12/07/01
(1)
Re: 26 ft Penn Yan for sale
-
Chuck Rothert
12:54:18 12/07/01
(0)
2nd Season with Ellis !
-
Chuck Rothert
14:54:16 12/04/01
(13)
comparison photo posted on Brett's page in album...
-
Bill
05:04:33 12/08/01
(0)
Re: Prop comparison pic
-
Bill
11:56:09 12/07/01
(3)
Hey Brett LOOK AT THIS!
-
Chuck Rothert
12:48:28 12/07/01
(2)
Re: Hey Brett LOOK AT THIS!
-
Eric Johnson
08:59:52 12/18/01
(0)
Re: Hey Brett LOOK AT THIS!
-
Brett Peck
18:35:23 12/17/01
(0)
Re: 2nd Season with Ellis !
-
Bill
20:12:26 12/04/01
(0)
Re: 2nd Season with Ellis !
-
John
15:51:11 12/04/01
(6)
Re: 2nd Season with Ellis !
-
John
11:08:34 12/07/01
(2)
Re: 2nd Season with Ellis !
-
Eric Johnson
08:43:10 12/18/01
(0)
Re: 2nd Season with Ellis !
-
Chuck Rothert
11:54:50 12/07/01
(0)
Re: 2nd Season with Ellis !
-
Chuck Rothert
09:19:51 12/05/01
(0)
You`re overpropped
-
Mike Gildea
20:02:30 12/04/01
(0)
Re: 2nd Season with Ellis !
-
Brett Peck
19:36:29 12/04/01
(0)
The Other site
-
Brett Peck
13:06:43 12/04/01
(5)
Re: The Other site
-
Bootlegger Ddo
06:15:19 12/05/01
(1)
Re: The Other site
-
Seafoam
18:16:04 12/07/01
(0)
Re: The Other site
-
Seafoam
14:06:51 12/04/01
(1)
Re: The Other site
-
Bootlegger
06:11:20 12/05/01
(0)
Re: The Other site
-
mike shamroy
13:20:41 12/04/01
(0)
PY Legend
-
jim k.
07:50:22 12/04/01
(0)
solid SS brackets
-
Seafoam
07:08:36 12/04/01
(6)
Re: solid SS brackets
-
AlMar
07:45:15 12/04/01
(5)
Re: solid SS brackets
-
Seafoam
09:45:45 12/04/01
(4)
Re: solid SS brackets
-
d.palm
23:40:08 12/07/01
(1)
Re: solid SS brackets
-
Seafoam
13:50:17 12/08/01
(0)
Re: solid SS brackets
-
AlMar
10:21:46 12/04/01
(1)
Re: solid SS brackets
-
Seafoam
14:09:30 12/04/01
(0)
Sunk Penn Yan salvage cost?
-
brian
21:56:55 12/02/01
(4)
Re: Sunk Penn Yan salvage cost?
-
Mike Holden
10:49:06 12/04/01
(0)
Re: Sunk Penn Yan salvage cost?
-
Seafoam
06:44:09 12/04/01
(0)
Re: Sunk Penn Yan salvage cost?
-
Mark
13:44:12 12/03/01
(0)
Re: Sunk Penn Yan salvage cost?
-
Bootlegger
06:25:30 12/03/01
(0)
Fire from Battery Charger
-
brian
21:45:04 12/02/01
(2)
Re: Fire from Battery Charger
-
Mike Gildea
18:57:40 12/03/01
(0)
Re: Fire from Battery Charger
-
Mark
13:51:58 12/03/01
(0)
Penn Yan Badges - Anyone Interested?
-
Big Bill
12:14:58 11/30/01
(9)
Re: Penn Yan Badges - Anyone Interested?
-
Ray Pape
18:57:03 6/04/02
(0)
Re: Penn Yan Badges - Anyone Interested?
-
John M
18:29:31 1/18/02
(0)
Re: Penn Yan Badges - Anyone Interested?
-
John M
18:25:47 1/18/02
(0)
Re: Penn Yan Badges - Anyone Interested?
-
Big Bill
12:35:18 12/03/01
(0)
Re: Penn Yan Badges - Anyone Interested?
-
Wayne
17:05:25 11/30/01
(0)
Re: Penn Yan Badges - Anyone Interested?
-
Mike W.
16:45:28 11/30/01
(0)
Re: Penn Yan Badges - Anyone Interested?
-
Mike W.
16:22:56 11/30/01
(0)
Re: Penn Yan Badges - Anyone Interested?
-
Bill H.
15:34:23 11/30/01
(0)
Re: Penn Yan Badges - Anyone Interested?
-
Brian Gozdenovich
13:52:37 11/30/01
(0)
12ft car top
-
Doug Henry
22:06:29 11/29/01
(2)
Re: 12ft car top
-
jim manning
06:13:27 12/09/01
(1)
Re: 12ft car top
-
jim manning
15:46:28 12/17/01
(0)
re-powering....new long block for 302...or used 350?
-
Bill
22:43:14 11/28/01
(11)
Re: re-powering....new long block for 302...or used 350?
-
Al Devernoe
20:21:22 11/29/01
(0)
Re: re-powering....new long block for 302...or used 350?
-
Mark
09:35:01 11/29/01
(0)
Re: re-powering....new long block for 302...or used 350?
-
Chuck Rothert
08:56:42 11/29/01
(8)
Re: re-powering....new long block for 302...or used 350?
-
Bill
12:27:37 11/30/01
(7)
Re: re-powering....new long block for 302...or used 350?
-
Mark
15:58:17 11/30/01
(6)
Re: re-powering....new long block for 302...or used 350?
-
Bill
02:54:45 12/01/01
(5)
Re: re-powering....new long block for 302...or used 350?
-
Mark
09:02:45 12/03/01
(0)
Re: re-powering....new long block for 302...or used 350?
-
Bob G
12:47:16 12/02/01
(3)
Re: re-powering....new long block for 302...or used 350?
-
Bob G
12:50:58 12/02/01
(2)
Re: re-powering....new long block for 302...or used 350?
-
Bill
19:29:20 12/02/01
(1)
Re: re-powering....new long block for 302...or used 350?
-
Mark
13:55:37 12/03/01
(0)
72 - 23' SPORTFISHERMAN -WEIGHT?
-
DAN
19:29:33 11/28/01
(1)
Re: 72 - 23' SPORTFISHERMAN -WEIGHT?
-
Mark
09:28:17 11/29/01
(0)
26 Penn Yan tunnel drive
-
Mike
14:59:05 11/27/01
(4)
Re: 26 Penn Yan tunnel drive
-
Steve Lawson
16:18:19 11/27/01
(3)
Re: 26 Penn Yan tunnel drive
-
mike
12:11:48 11/28/01
(2)
Re: 26 Penn Yan tunnel drive
-
Steve Lawson
17:01:16 11/29/01
(0)
Re: 26 Penn Yan tunnel drive
-
Mark
14:23:36 11/28/01
(0)
GPS Antenna Location
-
Brian Gozdenovich
09:55:34 11/27/01
(1)
Re: GPS Antenna Location
-
Al Devernoe
14:07:08 11/27/01
(0)
Chrysler 318 Marine Distributor
-
John
10:04:58 11/26/01
(4)
Re: Chrysler 318 Marine Distributor
-
Jorge Brunet
00:24:33 11/28/01
(1)
Re: Chrysler 318 Marine Distributor
-
John
12:25:06 11/28/01
(0)
Re: Chrysler 318 Marine Distributor
-
Seafoam
03:36:32 11/27/01
(0)
Re: Chrysler 318 Marine Distributor
-
Mark
10:42:01 11/26/01
(0)
Shaft Play
-
Steve Lawson
01:11:50 11/26/01
(2)
Re: Shaft Play
-
Brett Peck
11:14:57 11/26/01
(0)
Re: Shaft Play
-
Seafoam
07:05:46 11/26/01
(0)
201/2' open
-
mike shamroy
21:57:19 11/24/01
(0)
TRAILER FOR A 26'PENN YAN
-
BOOMERANG
21:44:32 11/24/01
(2)
Re: TRAILER FOR A 26'PENN YAN
-
Steve Lawson
01:01:04 11/26/01
(0)
Load Rite was bought out by Magic Tilt.
-
Mike Gildea
21:23:36 11/25/01
(0)
Avenger 24 for $1500
-
frank ponce
18:11:03 11/24/01
(1)
Re: Avenger 24 for $1500
-
Gunny
10:20:21 12/28/01
(0)
INCREASE HP WITH ENGINE REBUILD
-
J. L. Howard
11:33:41 11/24/01
(3)
Twin 225`s in a 26' should be more than enough ...
-
Mike Gildea
18:03:02 11/24/01
(2)
Re: Twin 225`s in a 26' should be more than enough ...
-
J. L. Howard
08:43:52 11/25/01
(1)
Re: Twin 225`s in a 26' should be more than enough ...
-
Mike Gildea
21:49:35 11/25/01
(0)
transducers & tunnels
-
al
11:22:04 11/23/01
(7)
Re: transducers & tunnels
-
jim k.
19:30:39 11/24/01
(0)
Re: transducers & tunnels
-
Wayne
20:52:58 11/23/01
(3)
Re: transducers & tunnels
-
Capt. David Pierucci
07:27:06 11/24/01
(2)
Re: transducers & tunnels
-
Wayne
22:12:38 11/24/01
(1)
Re: transducers & tunnels
-
Capt. David Pieruci
06:37:08 11/25/01
(0)
Not necessarily...
-
Mike Gildea
16:47:32 11/23/01
(1)
amendment tp previous comment
-
Mike Gildea
16:58:17 11/23/01
(0)
1950's Penn Yan "Swift"...replica plans?
-
Sue
11:42:51 11/22/01
(1)
Re: 1950's Penn Yan "Swift"...replica plans?
-
Seafoam
19:17:23 11/22/01
(0)
THANKSGIVING
-
mike shamroy
10:16:53 11/22/01
(1)
Re: THANKSGIVING
-
Seafoam
19:13:13 11/22/01
(0)
Hatch latches
-
Wayne
16:50:57 11/21/01
(2)
Re: Hatch latches
-
Jay Beeson
10:24:25 11/22/01
(1)
Re: Hatch latches
-
Wayne
08:27:25 11/23/01
(0)
PY Patrol Boats
-
jim k.
07:47:33 11/21/01
(0)
Soft Hatch Covers
-
Steve Lawson
02:46:37 11/21/01
(9)
my engine hatch is solid, but core must be saturated. ideas?
-
Mike Holden
09:43:44 11/26/01
(3)
Re: my engine hatch is solid, but core must be saturated. ideas?
-
Chuck Rothert
12:45:15 11/29/01
(1)
Thanks for the suggestions guys. I let you know how it goes.
-
Mike Holden
09:01:59 11/30/01
(0)
Re: my engine hatch is solid, but core must be saturated. ideas?
-
Bootlegger
06:33:11 11/27/01
(0)
Re: Soft Hatch Covers
-
Jay Beeson
10:16:27 11/22/01
(0)
Re: Soft Hatch Covers
-
Bob Boyd
16:52:22 11/21/01
(2)
Re: Soft Hatch Covers
-
jim k.
08:06:05 11/22/01
(0)
Re: Soft Hatch Covers
-
Bootlegger Don
18:12:53 11/21/01
(0)
Re: Soft Hatch Covers
-
jim k.
07:27:17 11/21/01
(0)
1979 Penn Yan Sportfisherman F/B 26ft.
-
Boomerang
22:13:48 11/20/01
(0)
goin $outh?
-
al
14:06:56 11/20/01
(0)
27 ft. Penn Yan sportfisherman (1979)
-
Spider
11:37:13 11/20/01
(0)
soft transom
-
jim k
19:15:25 11/18/01
(2)
Re: soft transom
-
Wayne
23:00:42 11/18/01
(0)
soft transom
-
Mike Gildea
19:40:05 11/18/01
(0)
72 PENN YAN 23'
-
DAN
10:31:54 11/18/01
(2)
Re: 72 PENN YAN 23'
-
Gary Stokes
13:56:30 11/19/01
(0)
Vindicator denotes a 26ft, 10 1/2ft Beam, mostly twin engines.
-
Mike Gildea
19:21:17 11/18/01
(0)
1972 penn yan looking for info
-
dan
14:26:24 11/17/01
(1)
Re: 1972 penn yan looking for info
-
Seafoam
08:58:04 11/18/01
(0)
Tired 302 Ford
-
Bill
03:55:08 11/17/01
(5)
Re: Tired 302 Ford
-
Bill H.
12:46:33 11/17/01
(4)
Re: Tired 302 Ford
-
Bill
14:15:29 11/17/01
(0)
Re: Tired 302 Ford
-
BH
12:52:44 11/17/01
(2)
Re: Tired 302 Ford
-
Bill
14:18:34 11/17/01
(1)
Try this one
-
BH
16:27:33 11/17/01
(0)
need OMC 172021 steering cable
-
Seafoam
16:45:50 11/16/01
(3)
CAN'T GET THERE FROM HERE
-
Seafoam
09:03:43 11/18/01
(2)
Good Luck Finding that one, "BUT",
-
Mike Gildea
19:51:46 11/18/01
(0)
Good Luck Finding that one, "BUT",
-
Mike Gildea
19:46:54 11/18/01
(0)
Fishing trip...Miami
-
Rich
21:05:22 11/13/01
(0)
Sportfisher FB 23 ft 350(?) 250 horse 1977
-
christine
14:56:12 11/13/01
(9)
Re: Sport Fisher FB 23 ft 360 250 hsp 1977
-
mallard island
17:22:21 12/12/01
(0)
Re: Sportfisher FB 23 ft 350(?) 250 horse 1977
-
Mike Gildea
19:40:39 11/15/01
(1)
Re: Sportfisher FB 23 ft 350(?) 250 horse 1977
-
christine
14:22:15 12/27/01
(0)
Re: Sportfisher FB 23 ft 350(?) 250 horse 1977
-
Brett Peck
11:43:21 11/14/01
(0)
Re: Sportfisher FB 23 ft 350(?) 250 horse 1977
-
Bootlegger Don
19:57:55 11/13/01
(1)
Re: Sportfisher FB 23 ft 350(?) 250 horse 1977
-
Bootlegger
20:00:56 11/13/01
(0)
Re: Sportfisher FB 23 ft 350(?) 250 horse 1977
-
Pat O'Brien
17:17:52 11/13/01
(2)
Re: Sportfisher FB 23 ft 350(?) 250 horse 1977
-
Knute Rockne
08:37:22 11/14/01
(1)
manners!
-
Pat O'Brien
10:54:38 11/14/01
(0)
Avenger specs
-
Al
10:13:02 11/13/01
(0)
Window gaskets
-
Phil
11:25:59 11/12/01
(13)
Re: Window gaskets
-
Jay Beeson
17:38:17 11/15/01
(3)
Re: Window gaskets
-
Chuck Rothert
09:50:54 11/16/01
(2)
Re: Window gaskets
-
Jay Beeson
08:19:13 11/17/01
(1)
Re: Window gaskets
-
Chuck Rothert
08:58:36 11/17/01
(0)
Re: Window gaskets
-
Brett Peck
16:10:16 11/12/01
(7)
Re: Window gaskets Directed to Brett
-
Chuck Rothert
20:57:48 11/12/01
(5)
Re: Window gaskets Directed to Brett
-
Brett Peck
11:18:12 11/13/01
(4)
Re: Window gaskets Directed to Brett
-
Chuck Rothert
11:41:47 11/13/01
(3)
Re: Window gaskets Directed to Brett
-
Brett Peck
16:30:34 11/13/01
(2)
Re: Window gaskets Directed to Brett
-
Chuck Rothert
17:15:42 11/13/01
(1)
Re: Window gaskets Directed to Brett
-
Brett Peck
11:33:53 11/14/01
(0)
Re: Window gaskets
-
Phil
16:59:58 11/12/01
(0)
Re: Window gaskets
-
Ludwigs Fair Grounds
12:28:59 11/12/01
(0)
Version 1 Tunnel rudder
-
Wayne
20:17:04 11/11/01
(3)
Re: Version 1 Tunnel rudder
-
Al Devernoe
14:46:10 11/12/01
(2)
Re: Version 1 Tunnel rudder
-
Wayne
23:02:28 11/12/01
(1)
Re: Version 1 Tunnel rudder
-
Al Devernoe
08:17:36 11/13/01
(0)
Manifolds for a Chrysler 340 or 360
-
Wayne
20:04:03 11/11/01
(0)
Length correction
-
Wayne
16:55:31 11/10/01
(0)
1978 PY closed bow tunnel drive model?????any ideas
-
Ty
10:41:29 11/10/01
(2)
Your VIN number on the port side transom has the length
-
Mike Gildea
18:49:20 11/22/01
(0)
Get your tape measure out...
-
Mike Gildea
18:38:27 11/22/01
(0)
1972 Montego 23'-3" "Our Golden 50 Jubilee" Need info
-
Wayne
21:31:28 11/09/01
(9)
My 74 Montego
-
Capt. Ron Pagliaro
12:19:05 11/10/01
(1)
Re: My 74 Montego
-
Wayne
16:38:52 11/10/01
(0)
Re: 1972 Montego 23'-3" "Our Golden 50 Jubilee" Need info
-
Bootlegger
08:54:58 11/10/01
(3)
Re: 1972 Montego 23'-3" "Our Golden 50 Jubilee" Need info
-
Wayne
10:21:05 11/10/01
(2)
My Montego
-
Capt. Ron Pagliaro
12:11:32 11/10/01
(1)
Re: My Montego
-
Wayne
11:31:57 11/11/01
(0)
Re: 1972 Montego 23'-3" "Our Golden 50 Jubilee" Need info
-
Seafoam
07:34:33 11/10/01
(2)
Re: 1972 Montego 21'-3" "Our Golden 50 Jubilee" Need info
-
Wayne
08:09:33 11/10/01
(1)
Re: 1972 Montego 21'-3" "Our Golden 50 Jubilee" Need info
-
Seafoam
10:19:08 11/11/01
(0)
Early Tunnel Hull Homeport entries not available ?
-
Mike Holden
12:20:09 11/09/01
(1)
correction...it's hit and miss. Some of the old stuff is not available
-
mike
12:29:14 11/09/01
(0)
1975 20.5 PY Cuddy Merc 233 (Ford 351 V-8) Photo
-
Phil
19:58:45 11/08/01
(4)
1975 20.5 PY Cuddy
-
Mike Gildea
21:40:16 11/08/01
(2)
Re: 1975 20.5 PY Cuddy
-
Phil
07:04:59 11/09/01
(0)
Re: 1975 20.5 PY Cuddy
-
Bill
01:18:06 11/09/01
(0)
1975 20.5 PY Cuddy Model ERM weighs 2650 dry weight.
-
Mike Gildea
21:36:27 11/08/01
(0)
1975 20.5 PY Cuddy Merc 233 (Ford 351 V-8) weight?
-
Phil
19:28:54 11/08/01
(4)
Re: 1975 20.5 PY Cuddy Merc 233 (Ford 351 V-8) weight?
-
Al Devernoe
15:00:19 11/09/01
(1)
Re: 1975 20.5 PY Cuddy Merc 233 (Ford 351 V-8) weight?
-
Phil
18:46:06 11/09/01
(0)
Re: 1975 20.5 PY Cuddy Merc 233 (Ford 351 V-8) weight?
-
Jeff Crowe
20:58:52 11/08/01
(1)
Re: 1975 20.5 PY Cuddy Merc 233 (Ford 351 V-8) weight?
-
Phil
07:11:20 11/09/01
(0)
For Sale: Carter AFB Carburetor for 318 Chrysler
-
Brian Gozdenovich
17:18:21 11/08/01
(1)
Re: For Sale: Carter AFB Carburetor for 318 Chrysler
-
Al
10:23:37 11/21/01
(0)
For Sale Complete Restoration of a 1978 Penn Yan 20'
-
Al Dettenrieder
16:56:07 11/08/01
(1)
Re: For Sale Complete Restoration of a 1978 Penn Yan 20'
-
ato23
15:55:39 2/12/02
(0)
318 fresh water cooled Question
-
Paul Perini
17:02:55 11/07/01
(3)
Re: 318 fresh water cooled Question
-
Al
12:49:41 11/14/01
(0)
Re: 318 fresh water -need help
-
Paul Perini
17:16:36 11/08/01
(1)
Re: 318 fresh water -need help
-
Bill H.
10:47:23 11/10/01
(0)
trailering 23 Avenger F/B
-
Al
14:34:26 11/07/01
(13)
Re: trailering 23 Avenger F/B
-
d.palm
23:56:27 11/09/01
(0)
Re: trailering 23 Avenger F/B
-
Brian Gozdenovich
14:46:10 11/08/01
(0)
Re: trailering 23 Avenger F/B
-
Mark
09:22:18 11/08/01
(0)
Re: trailering 23 Avenger F/B, Bob is not lost, only fishing !!!
-
Bob Boyd
23:04:37 11/07/01
(1)
Re: trailering 23 Avenger F/B, Bob is not lost, only fishing !!!
-
Jeff Crowe
20:30:48 11/08/01
(0)
Re: trailering 23 Avenger F/B
-
T.LINDBURG
22:31:38 11/07/01
(0)
23ft FlyBridge Avenger is 4600 pounds with out...
-
Mike Gildea
20:55:02 11/07/01
(1)
Re: 23ft FlyBridge Avenger is 4600 pounds with out...
-
Chuck Rothert
09:04:10 11/08/01
(0)
Re: trailering 23 Avenger F/B
-
Bob Sullivan
16:27:55 11/07/01
(4)
Re: trailering 23 Avenger F/B
-
Tim
17:18:03 11/07/01
(3)
Re: trailering 23 Avenger F/B
-
Sully
16:01:09 11/09/01
(2)
Destroying your Voyager.
-
Mike Gildea
21:54:22 11/09/01
(0)
Re: trailering 23 Avenger F/B
-
Bootlegger
19:55:40 11/09/01
(0)
201/2 ft. explorer open runabout
-
mike shamroy
11:33:12 11/06/01
(5)
Re: 201/2 ft. explorer open runabout
-
Jorge
23:20:57 11/07/01
(4)
Re: 201/2 ft. explorer open runabout
-
mike shamroy
13:03:37 11/08/01
(3)
Re: 201/2 ft. explorer open runabout
-
mike shamroy
13:06:05 11/08/01
(2)
Re: 201/2 ft. explorer open runabout
-
Jorge
23:43:43 11/09/01
(1)
Re: 201/2 ft. explorer open runabout
-
Jorge
23:51:19 11/09/01
(0)
Hot water tank installation on a 30' F.B.
-
Mike Holden
09:21:17 11/06/01
(4)
Re: Hot water tank installation on a 30' F.B.
-
Rich
22:34:04 11/07/01
(2)
Re: Hot water tank installation on a 30' F.B.
-
Mike Holden
09:15:54 11/09/01
(1)
Re: Hot water tank installation on a 30' F.B.
-
Rich
22:43:54 11/09/01
(0)
Re: Hot water tank installation on a 30' F.B.
-
Mark
10:45:15 11/06/01
(0)
Tunnel For sale
-
Mark
10:10:42 11/05/01
(4)
Re: Tunnel For sale
-
Al
13:04:22 11/06/01
(0)
Re: Tunnel For sale
-
al
07:07:21 11/06/01
(2)
Re: Tunnel For sale
-
Mark
10:55:05 11/06/01
(0)
Re: Tunnel For sale
-
Mark
10:43:12 11/06/01
(0)
1974 advenger for sale in CT
-
Frank
21:57:09 11/04/01
(0)
Hey "Flounder"
-
Seafoam
08:19:33 11/04/01
(3)
Re: Hey "Flounder"
-
Flounder
20:40:01 11/04/01
(2)
Re: Hey "Flounder"
-
Seafoam
07:00:35 11/05/01
(1)
Re: Hey "Flounder"
-
Flounder
08:08:48 11/19/01
(0)
High and dry storage/ hull separation
-
John M. Stepp
17:05:16 11/03/01
(2)
Re: High and dry storage/ hull separation
-
Bill H.
13:51:43 11/04/01
(1)
Re: High and dry storage/ hull separation
-
John
18:30:15 11/04/01
(0)
pennyan for sale
-
Don Oswald
15:26:27 11/03/01
(0)
1980 26' py hardtop for sale
-
Don Oswald
14:57:44 11/03/01
(0)
Engine parts swap
-
Jim Moore
23:32:30 10/31/01
(8)
Not worth the trouble
-
Mike Gildea
18:42:58 11/01/01
(4)
Re: Not worth the trouble
-
Mark
09:00:45 11/02/01
(1)
Re: Not worth the trouble
-
jimmy
20:11:13 12/02/01
(0)
Repowering
-
Jim Moore
00:49:50 11/02/01
(1)
Re: Repowering
-
Chuck Rothert
09:12:15 11/02/01
(0)
Re: Engine parts swap
-
Rob
14:33:52 11/01/01
(0)
Re: Engine parts swap
-
L.C.
10:19:45 11/01/01
(0)
Re: Engine parts swap
-
Mark
09:33:51 11/01/01
(0)
Tired 302 Ford
-
Bill
12:04:53 10/30/01
(6)
Re: Tired 302 Ford
-
Mark
12:12:33 10/31/01
(0)
Re: Tired 302 Ford
-
Jim Moore
23:07:07 10/30/01
(4)
Thanks Jim and Mark
-
Bill
01:28:45 11/02/01
(3)
Re: Thanks Jim and Mark
-
Mark
09:04:13 11/02/01
(2)
Re: Thanks Jim and Mark
-
Bill
00:18:48 11/03/01
(1)
Rotation
-
Jim Moore
10:38:23 11/03/01
(0)
Anyone need a cherry 454 Crusader?
-
D.Palm
20:34:45 10/29/01
(3)
Re: Anyone need a cherry 454 Crusader?
-
Gary
06:47:32 10/30/01
(2)
Re: Anyone need a cherry 454 Crusader?
-
D.Palm
21:49:31 10/31/01
(1)
Re: Anyone need a cherry 454 Crusader?
-
D.Palm
22:23:28 11/02/01
(0)
1978 20' Penn Yan
-
Al Dettenrieder
16:35:00 10/29/01
(4)
Re: For SaleTotal Restroation 1978 20' Penn Yan
-
Al Dettenrieder
16:38:42 11/08/01
(0)
Re: 1978 20' Penn Yan
-
Walt Collins
12:24:24 10/31/01
(2)
Re: 1978 20' Penn Yan
-
Jay Beeson
06:45:49 11/03/01
(1)
Re: 1978 20' Penn Yan
-
walt Collins
13:19:53 11/05/01
(0)
The come back on Bonding.
-
Chuck Rothert
07:52:43 10/29/01
(3)
Re: The come back on Bonding.
-
rob
15:56:49 10/29/01
(0)
Re: The come back on Bonding.
-
Brian Gozdenovich
11:07:24 10/29/01
(1)
Re: The come back on Bonding.
-
Chuck Rothert
11:39:02 10/29/01
(0)
Hydraulic stearing
-
Rich
21:37:27 10/28/01
(2)
Re: Hydraulic steering
-
Andy B.
21:14:53 11/14/01
(0)
Re: Hydraulic stearing
-
Mark
12:25:18 10/31/01
(0)
Wellcraft
-
Tracy Suggitt
22:06:01 10/27/01
(1)
Re: Wellcraft
-
someyoungguy
18:00:58 11/03/01
(0)
Bonding System
-
Brian Gozdenovich
10:28:55 10/25/01
(6)
Re: Bonding System
-
Steve
21:28:50 10/26/01
(0)
Re: Bonding System
-
rob
10:20:52 10/26/01
(1)
Re: Bonding System--Neato site.
-
Chuck Rothert
14:28:09 10/26/01
(0)
Re: Bonding System
-
Paul Perini
20:03:10 10/25/01
(0)
Re: Bonding System
-
Chuck Rothert
11:23:25 10/25/01
(1)
Re: Bonding System
-
Paul Perini
19:38:10 10/25/01
(0)
Winterizing
-
Brian Gozdenovich
13:37:07 10/24/01
(2)
Re: Winterizing
-
Al Devernoe
14:57:37 10/24/01
(1)
Re: Winterizing
-
L.C.
09:42:57 10/25/01
(0)
stove
-
Gmez
09:12:02 10/24/01
(3)
Re: stove
-
capt. David Pierucci
12:47:59 10/25/01
(1)
Re: stove
-
Gmez
06:58:00 10/30/01
(0)
Re: stove
-
Pete Stellakis
11:28:32 10/25/01
(0)
V-Berth Bilge
-
Jim Moore
14:53:28 10/23/01
(11)
Re: Bilge Pump
-
Seafoam
07:23:33 10/24/01
(0)
Re: V-Berth Bilge
-
Bill H
20:24:27 10/23/01
(0)
Re: V-Berth Bilge
-
Capt. David Pierucci
17:31:32 10/23/01
(8)
Re: V-Berth Bilge
-
Brett Peck
11:08:39 10/24/01
(0)
Thanks again.
-
Jim Moore
00:27:31 10/24/01
(6)
Re: Thanks again.
-
Capt. David Pierucci
06:47:49 10/24/01
(5)
Re: Deck Boards
-
Jim Moore
12:04:51 10/24/01
(4)
Jim Moore
-
Seafoam
13:27:10 10/24/01
(3)
Re: Jim Moore
-
Bob Sullivan
17:50:58 10/29/01
(2)
Re: Jim Moore
-
Bob Sullivan
18:05:57 10/29/01
(1)
Re: Bob
-
Jim Moore
22:57:15 10/30/01
(0)
Rebuilding PENY12371
-
Paul Perini
15:39:48 10/21/01
(1)
Re: Rebuilding PENY12371
-
Al Devernoe
19:51:32 10/21/01
(0)
MANUAL & PARTS FOR 1977 318 23FT
-
chris
14:55:05 10/21/01
(10)
manual 1977 chrysler 350/250 hsp.
-
CHRISTINE
13:33:26 11/14/01
(1)
Sport Fisher 360 77 23ft. Parts Needed
-
Christine/Mallard Island
11:43:27 1/16/02
(0)
manual w electrical, 23ft FB sportfisher, 350/250
-
CHRISTINE
13:27:54 11/14/01
(0)
Re: MANUAL & PARTS FOR 1977 318 23FT
-
L J
20:33:59 10/26/01
(0)
Re: MANUAL & PARTS FOR 1977 318 23FT
-
Brian Gozdenovich
13:39:10 10/22/01
(5)
Re: MANUAL & PARTS FOR 1977 318 23FT
-
Jay Beeson
18:26:32 10/22/01
(4)
Re: MANUAL & PARTS FOR 1977 318 23FT
-
Brian Gozdenovich
14:16:19 10/23/01
(2)
Re: MANUAL & PARTS FOR 1977 318 23FT
-
CHRISTINE-MALLARD ISLAND
14:06:56 12/27/01
(0)
Re: MANUAL & PARTS FOR 1978 360 23FT SPORT FISHER
-
christine-mallard island
14:03:02 12/27/01
(0)
Re: MANUAL & PARTS FOR 1977 318 23FT
-
Seafoam
19:41:06 10/22/01
(0)
Q jet Premature opening of secondaries
-
Capt. David Pierucci
11:46:33 10/21/01
(3)
Re: Q jet Premature opening of secondaries
-
steve ridout
21:05:30 10/25/01
(0)
Re: Q jet Premature opening of secondaries
-
jay beeson
18:29:45 10/22/01
(1)
Re: Q jet Premature opening of secondaries
-
Capt. David Pierucci
18:33:03 10/22/01
(0)
sea water pump hook up
-
mike mosko jr.
11:00:31 10/21/01
(1)
Re: sea water pump hook up
-
Al Devernoe
08:14:55 10/22/01
(0)
Got the reman Q jet. How do I adjust idle and mixture?
-
Capt. David Pierucci
13:58:30 10/20/01
(3)
Idle and mixture adjustment.
-
Jim Moore
22:54:15 10/20/01
(2)
Re: Idle and mixture adjustment.
-
Capt. David Pierucci
09:24:59 10/21/01
(1)
Locations
-
Jim Moore
10:51:41 10/21/01
(0)
Engine Service Manual Needed--Where to Get One?
-
Steve
23:46:56 10/17/01
(4)
Re: Engine Service Manual Needed--Where to Get One?
-
Jay Beeson
06:47:57 10/19/01
(0)
Re: Engine Service Manual Needed--Where to Get One?
-
Brian Gozdenovich
12:35:52 10/18/01
(0)
Re: Engine Service Manual Needed--Where to Get One?
-
Brett Peck
12:09:06 10/18/01
(1)
brett "Humble" is where it's at.
-
Chuck Rothert
14:28:21 10/19/01
(0)
Teak Diving Platform
-
Seafoam
11:11:20 10/17/01
(8)
Re: Teak Diving Platform
-
Jim Moore
21:48:20 10/17/01
(2)
Re: Teak Diving Platform
-
Bill H.
07:39:50 10/18/01
(1)
Re: Diving Platform
-
Jim Moore
23:02:13 10/20/01
(0)
Re: Teak Diving Platform
-
Bill
18:46:29 10/17/01
(0)
Re: Teak Diving Platform
-
Capt.Ron
13:04:59 10/17/01
(1)
Re: Teak Diving Platform
-
Seafoam
16:12:52 10/17/01
(0)
Re: Teak Diving Platform
-
Capt. David Pierucci
12:27:30 10/17/01
(1)
manifold
-
Seafoam
16:09:24 10/17/01
(0)
Asian Chat Forums / Middle-East News Update / Free Email
-
Tom
23:54:37 10/16/01
(0)
Hull Mounted Transducer Stand-off
-
Steve
15:39:11 10/16/01
(1)
Re: Hull Mounted Transducer Stand-off
-
Dee
16:44:50 10/16/01
(0)
Anti-seize Between Prop & Shafts?
-
Steve
15:32:51 10/16/01
(11)
Re: Anti-seize Between Prop & Shafts?
-
Dee
22:08:33 10/17/01
(3)
Re: Anti-seize Between Prop & Shafts?
-
Brett Peck
11:58:24 10/18/01
(2)
beating a dead horse but please read
-
Dee
22:46:14 10/18/01
(1)